C/o Residential accommodation in CHC Hospital at Nalagarh (SH C/o 2.00 No Type-II Quarters).

Amount

Excavation in foundations, trenches etc. in earth work lift up 1.5 meters stacking the excavated soil not more than 3 meters clear from the edge of excavation and than returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in 20 meters. (50% Pick+50% Jumper work). including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1Cement: 6 Sand: 12 graded stone aggregate 40mm nominal size) in Foundation & Plinth including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.

Foundation , Footing basis of Columns Etc. And mass concrete.

Flat surfaces such as soffits of suspended floors, roofs , landings and the like up to 200mm thickness

Columns plinth and string courses and the like Square rectangular or polygonal in plan

Stair cases with sloping or stepped soffits excluding landing.

Beams, cantilevers, girders and lintels.Sides and soffits of beams, beam haunching cantilivers, girders, bressumers and lintels upto any depth/height

Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in including carriage of material in all leads and lifts.

Foundation , Footing basis of Columns Etc. And mass concrete.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.

Columns plinth and string courses and the like Square rectangular or polygonal in plan

Stair cases ( except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Brick work using common burnt clay building bricks in Super-structure above plinth level upto floor two level (first Class Bricks). in cement mortar 1:6 (1 cement :6 sand) including carriage of material in all leads and lifts.

Half brick masonry in common burnt clay building bricks in in super structure above plinth level upto floor two level kin CM 1:4 including carriage of material in all leads and lifts.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. including carriage of material in all leads and lifts.

Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately) including carriage of material in all leads and lifts.

6mm thick cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) all modes of transportation in all leads lifts and all incidental charges.

15 mm cement plaster in single coat on rough side of stone walls for interior plastering upto floor two level including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) all modes of transportation in all leads lifts and all incidental charges.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) all modes of transportation in all leads lifts and all incidental charges.

Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of following shades all modes of transportation in all leads lifts and all incidental charges .

SILVER GREY

Precast terrazzo tiles hydraulic compressed 20 mm thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm in height on 10 mm thick cement plaster 1:3 (1 cement: 3 sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of following shades. all modes of transportation in all leads lifts and all incidental charges .

SILVER GREY

White glazed tiles 6mm thick in skirting riser of steps and dado laid on a bed of 12mm thick cement mortar 1:3 (1 cement :3 sand finished with pointing in white cement. all modes of transportation in all leads lifts and all incidental charges .

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. all modes of transportation in all leads lifts and all incidental charges .

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick all modes of transportation in all leads lifts and all incidental charges .

Kota stone slab floooring 20mm ( ave.) thick base of cement mortor 1:4 (1cement:4sand) laid over and jointed with grey cement slury mixed with pigment to match the shade of the slab including rubbing and poilshing complete. ( 19 mm thick) all modes of transportation in all leads lifts and all incidental charges .

Providing and laying cement concrete 1:4:8 (1Cement: 4 Sand: 8 graded stone aggregate nominal size) excluding cost of form work in Foundation & Plinth including carriage of material in all leads and lifts.

Steel work rivetted in built up sections including cutting,hoisting, fixing,in position and applying a priming coat of red lead paint all modes of transportation in all leads lifts and all incidental charges .

Gratings framed guard bars, Ladders, Railing,Brackets and similar work.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely.all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-inCharge

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 25 mm thick frame including carriage of material in all leads and lifts.

Providing and fixing 12mm thick and 100 mm wide palmet with 25mm diameter wooden curtain rod and brackets including fixing with 25x3mm M.S. flat 10 cm long and plugs etc. complete. 1 st class deodar wood

Providing and fixing anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing anodized Tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. Complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and fixing chromium plated brass 50mm cup board or wardrobe knobs with nuts complete all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing aluminum handles anodized transparent or dyed to require colour and shade with necessary screws complete as per HP.PWD. Specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing oxidized M.S. single acting spring hinges with necessary screws. 150mm all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing oxidized M.S. double acting spring hinges with necessary screws. 150mm all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing bright finished hard drawn hooks and eyes. 150 mm

Providing and fixing bright finished brass heaps and stapples (safety type) with necessary screws etc complete. 150 mm

Providing and fixing 100mm bright ,finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. sqm. 19.15 31.80 all modes of transportation in all leads lifts and all incidental charges.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of puttyasrequired for making the surface all modes of transportation in all leads lifts and all incidental charges.

Wall finishing with water proofing exterior grade emulsion of approved brand and manufacture and of required shade on un decorated wall surfaces two coat to give an even shade after thoroughly brushing the surface to remove all dirt and dust and mortar droppings and other foreign matters all modes of transportation in all leads lifts and all incidental charges.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick / stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. all modes of transportation in all leads lifts and all incidental charges.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) sq.m 21.65 131.60 all modes of transportation in all leads lifts and all incidental charges.

Providing and laying cement concrete 1:3:6 (1 cement:3 sand :6 graded stone aggregate 20 mm nominal size) and curing complete including carriage of material in all leads and lifts.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. all modes of transportation in all leads lifts and all incidental charges .

150 mm dia pipe

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete all modes of transportation in all leads lifts and all incidental charges .

PVC Plain bend 150mm dia

PVC concrete type bend 150mm dia

PVC shoe 150mm dia

Providing and fixing bright finished brass furniture handles.

Providing and fixing bright finished brass 100mm. Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality)

Painting top of roofs with bitumen of approved Quality at 17 kg for 10 sqm. impregnated with a coat of sand at 0.06cum per 10 sqm. Including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil Complete.

With residual type perroleum bitumen of penetration 80/100

Providing & laying mud phuska under tiles terracing on RCC slab roof over bitumen pinted roof mud plaster 3 average thoickness of rammed earth and another earth and another layer of 1 thick mud plaster laid to slope complete.

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (1 cement :3 sand) over a 12 mm layer of cement mortar 1:3 (1 cement :3 sand ) and finished neat.

Providing angular fillet 7.5x7.5 cm cement concrete 1:2:4 (1cement :2 sand :4 graded stone aggregate 20 mm nominal size

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.

For doors windows and ventilatiors and glazed partitions frames.

For shutters of doors windows & ventilators including providing and fixing hinges/pivotsand making provisions for fixing of fittings

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)

glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm.

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) 12 mm thick

Providing and fixing aluminium anodised powder coated pattern to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately)

Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 g with wire of dia 0.56 mm.

Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps (Medium grade) tube fitting and clamps including making good the wall ceiling and floor all modes of transportation in all leads lifts and all incidental charges.

a) 15 mm nominal bore :-

b) 20 mm nominal bore

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials within all leads and lifts

Constructing chamber 600x600x750 in size of water meter chamber complete with CI double flat surface box 400x 550x165 mm mm inside with locking arrangement and RCC top slab mix 1:2:4 100 mm thick foundation concrete 1:5:10 and inside plastering in CM 1:3 with afloating coat of neat cement including curing complete all modes of transportation in all leads lifts and all incidental charges.

(e) with 200 mm thick wall of brick masonry in CM 1:5

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (seat and cover to be measured and paid for separately) all modes of transportation in all leads lifts and all incidental charges.

(i) Anglo Indian (Universal closet)

Providing & fixing CI inlet connection for flush pipe with WC pan all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing plastic seat (solid/ hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers all modes of transportation in all leads lifts and all incidental charges.:-

Solid Type (a) colour plastic seat & cover

Providing & fixing vitreous china wash basin (white shade) with single hole for pillars with CI or MS brackets painted white including cutting holes and making good the same but excluding fixings all modes of transportation in all leads lifts and all incidental charges.:-

Flat back (i) 630x450mm

Providing & fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipe and fittings. for sink or wash basin all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing 32 mm dia CP brass waste for wash basin of sink all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing dia MI union for wash basin or sink all modes of transportation in all leads lifts and all incidental charges.

(a) 32mm dia

Providing & fixing 100 dia sand cast iron grating for gully floor or Nahni trap all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing 600 x 450mm (six hundred into four hundred fifty mm) beveled edge mirror of superior class mounted on 6mm thick AC sheet of plywood sheet fixed with wooden plugs with CP brass screws and washers complete all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing CP brass towel rail with CP brass (heavy duty ISI marked no 8931 & 8934) brackets fixed wooden with all modes of transportation in all leads lifts and all incidental charges.

(i) CP brass 600 x 20mm

Providing & fixing chromium plated heavy duty brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing CP brass bib tap with capstan head all modes of transportation in all leads lifts and all incidental charges.

(a) 15 mm dia

Providing & fixing CP brass pillar tap with capstan head all modes of transportation in all leads lifts and all incidental charges.

(a) 15 mm dia

P/F CP brass angle valve15 mm without nut and pipe all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing stop cock all modes of transportation in all leads lifts and all incidental charges.

(a) 15 mm dia

P/F bath shower all modes of transportation in all leads lifts and all incidental charges.

P/F PVC connection pipe with brass union all modes of transportation in all leads lifts and all incidental charges.

300 / 450 mm long (i) 15 mm nominal bore

P/F brass ball valve with (Horizontal plunger Type) all modes of transportation in all leads lifts and all incidental charges.:- High pressure with polythene floats:-

(i) 15 mm nominal bore

(i) 20 mm nominal bore

Providing and placing PVC water storage tank make SINTEX triple layers with necessary fittings including overflow pipe and scour pipes etc. and ball valve with cover and locking arrangement including providing pads of required sizes for inlet and outlet etc. all modes of transportation in all leads lifts and all incidental charges.

a) 1000 liters

Providing & fixing PVC floor trap of self cleaning design i/c cutting and making good the walls and floors all modes of transportation in all leads lifts and all incidental charges.:-

(i) 110 mm X 90 mm

P/F high pressure PVC spigot and socket waste and vantilation pipes ISI marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC single equal branch with access door ISI marked in rubber washer 3 mm thick bolts and nuts complete including fixing with approval adhesive etc. Complete. within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F high pressure PVC door bend with oval access door in sertion rubber washer 3 mm thick bolt and nuts ISI marked complete including fixing with approval adhesive etc. Complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC Collars ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC Plain Bend ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC clamps ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F Stainless steel kitchen sink of approved standard ISI Marked / make with drain board and C.P. Waste with C.I. Or M.S. Brackets painted white including cutting holes and makng good th same but excluding fitting. (610 X 460 mm with bowl depth 200mm )

Providing and fixing PTMT Coloured /White high density polyethylene / poly propypene 10 litres capacity ( full flush) european standard control low level flushing cistren with fittings such as lead valve,syphon, 15 mm nominal size PVC Ball valve with polythene float, with push burron , coupling for connections with inlet, outlet and over floe pipe, 40 mm dia C.P. Flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measurement and paid for separately )

HARKIT SINGH

ranjit singh

Hardeep Singh Bedi

shubham govt.contractor

mustak

RAM PAL CHANDEL