CERTAIN B NAD R REPAIRS IN HANGARS ANNEXES AND CERTAIN GARAGES IN TECHNICAL AREA AT AIR FORCE STATION PATHANKOT

Amount

Taking down Doors chowkat or frame exc 1.5 Sqm but not exc 4 sqm but with shutters (without taking off shutters from the frames) and removing out of site complete all as specified and directed by Engineer-in-Charge.

Taking down steel/wooden ventilators chowkat or frames n.exc 1.5 Sqm each. but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pressed steel frames for doors size 105 mm X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC type B0, 1:2:4 (12.5 mm graded crushed stoone aggregate) filling in door and frames, any size, single or double rebated, including arrangements complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus ofelasticity 850 N/mm² and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Butt hinges, extruded aluminium alloy with galvanised mild steel hinge 125 mm , fixed with steel chromium plated bright screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and directed by Engineer-in-Charge.

Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. including stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. and of approved quality with 6 mm thick figured glass and ss wire mesh of 0.36 mm nominal dia and average width of aperture 1.40 mm, complete all as specified and directed by Engineer-in-Charge. Note:- The rate shall also include making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing windows and , shall deemed to have been included in the quoted rate and no extra shall be admitted at a laterdate in this respect.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Material and labour Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour Brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:6 (Except Brick) complete and all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and directed by Engineer-in-Charge.

Material and labour rendering (external) 15mm thick on brick/concrete blocks or works consisting in 2 layers, backing/under layer of 10mm thick in Cement Mortar 1:4 and including mixing WPC to float/ top layer, finished fair and even complete all as specified and directed by Engineer-in-Charge. Note : Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item.

Supply of liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and labour rendering (Internal) 10mm thick in cement mortar 1:6 on brick/ PCC blocks or concrete works, finished plastered surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of surface and applying two coats of exterior emulsion paint (weather coat) in camouflage pattern , any shade or colour as approved over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulation distemper on wall over a coat of primer etc complete all as specified and directed by Engineer-in-Charge.

Taking down roof trusses, coupled rafters or trussed beams exc 8 mtr complete all as specified and directed by Engineer-in-Charge.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MS section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W quality B complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment conforming to Fe 410-W (Gde-E 250) quality-A etc complete all as specified and directed by Engineer-in-Charge.

Dismantling AC corrugated or semi corrugated sheets in wall cladding or roof coverings including ridges and make good of aluminium earthing strips after fixing of sheets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of camouflage colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings upto the height of 12 Mtr complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap , fixed with L- type or cranked hook bolts and washer in roofs, walls etc. with grade of zinc coating 275.as desired roled shape for the hangar roof upto the height of 16 Mtr including leveling the wall top for smooth laying of CGI sheet and taking down earthing arrester and refixing the same complete all as specified and directed by Engineer-in-Charge. Note:- The rate shall also include making all damages/plastering repair, and necessary scaffolding upto required height of hangar, and, shall deemed to have been included in the quoted rate and no extra shall be admitted at a laterdate in this respect.

Material and labour 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

Material and labour Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc.before painting the CGI sheet complete all as specified and directed by Engineer-in-Charge.

Material and labour preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint(camouflage pattern) over a coat of red oxide zinc chrome complete all as specified and directed by Engineer-in-Charge.

Material & labour for Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match laid over screed bed or bedding layer 15 mm thick in cement mortar 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubish of the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7/600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including 10 mm thick screed bed or bedding layers in cement mortar 1:3 for laying tiles on vertical surfaces, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubish of the premises complete all as specified and directed by Engineer-in-Charge.

Material and labour for light shade vitrified tiles flooring 9-10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shed including 15mm screed bed in cement mortar 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubish of the premises complete all as specified and directed by Engineer-in-Charge.

Material and labour for Machine cut kota slab fooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and 20mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes, staircase and landing complete all as specified and directed by Engineer-in-Charge

Machine cut kota slab for skirting 18 to 20mm thickness in skirting/dado over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and rendering 10 mm thick in cement mortar 1:4 for staircase and landing complete all as specified and directed by Engineer-in-Charge

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

Supply and fixingin repair fancy type CP bib taps, 15 mm bore with crutch or , screwed down, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair CP Pillar taps 15 mm dia, fancy type, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stop/angle valves chromium plated 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, complete all as specified and directed by Engineer-in-Charge.

Supply and fixingin repair Soap dish vitreous china fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets including 32mm bore PVC waste pipe and CP waste coupling complete and fixed in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white, with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe complete including making good to floor to match with adjoining surface and taking out existing WC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china squatting pan 'Orissa pattern size 580x440mm white with 'P' or 'S' trap and integral foot rest (excluding, flushing cistern and flush pipe) squatting pan including connection 'P' trap and to flushing pipe, anti syphonage pipe and trap set in and including concrete and making good the flooring as per existing specification and taking out existing WC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 10 liters capacity with intel, ball valve, float valve push button type handle including telescopic flush pipe 32 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 15mm dia PVC connection with PTMT check nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs only Vitreous China bowl urinal flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe and complete connecting items as per existing complete all as specified and directed by Engineer-in-Charge.

Dismantling false ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness complete all as specified and directed by Engineer-in-Charge.

Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24mm, cross tee 25x24mm/25x24mm and wall angle 24x24mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed by Engineer-in-Charge.

M/S G P MARWAHA (BID ID -3377185)

M/S P.S CONSTRUCTION CO (BID ID -3377033)

LAKSHMI BUILDING INOVATORS (BID ID -3383470)