Erection of Octagonal poles at badiger oni anc cholinavar oni and feedar pillar box cable of ward no.67 of HBL Dn.

Erection of Octagonal poles at badiger oni anc cholinavar oni and feedar pillar box cable of ward no.67 of HBL Dn.

4.2.6) 8 m - Top 70 mm and Bottom 135 mm dia Fabricating,supplyinganderectionof.mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarr...

1.4.1 In all kinds of soils Depth upto 1.5 m Earth work excavation for Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Build...

Base Concerete 2.1.1 Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates PCC Dimension =0.4mX0.4mX0.1m=0.016Cum .Providing and laying in position Cement Concrete for levelling course ...

2.11 h. All other type of structures for TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cut...

Concerete 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in Cement Concrete for all

Basement & surface level works, return walls,

retaining walls, ...

Centering Work 2. Foundation, Sub structure ( 5 Percentage on finished rate of concrete per m3 )

SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS81301984and(Virgin)PVCinsulationsheathedsuitableforworking vol...

118.4 LED Street Light 90W Supply & Fixing of LED Street Lightwith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser wi...

5.18.1) 6-32 A SP MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 wit...

1.6.1) Ordinary Soil Digging of Pit for providing GI Pipe type Earthing

Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approve...

Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sq mm

1.17.1 All kinds of soils. Depth upto 1.50 m Earth work excavation for Cables Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifi...

32.03) 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) UG Cable Basic Rate:141842 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per...

32.04) 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) UG Cable Basic Rate:88418 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per I...

66.05) HDPE/PLB Pipe 40/33 mm

Pot Head Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. 35.01) Up ...

Pipe type earthing for each street light box 51.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

51.02) Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

51.03) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

21.07) 120 to 240 Sqmm Labour Charges Basic Rate:32278 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25...

9.04) above 8 Ways Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete

27.02 Fixing of Route Joint Indicating Slab

Releasing & Refixing of Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,

Releasing of RCC/PSCC Poles 9 Mtr of 90% of the Pole

erection charges.

Releasing of Conductor 7.04) Rabbit ACSR

5.02 Releasing of 4 Pin cross arm with Insulator and Braces fixing

30.02) 12 Way LT Feeder Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)

32.18) 240 Sqmm, 3.5 Core, (28 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-...

34.12) 240 Sqmm, 3.5/4 Core Straight Through Jointing Kit Basic Rate:1717 Straight Through Jointing Kit Suitable for

1.1 kV Class LTUG Cable as per IS-13573

35.04 )3.5 x 225/240/300 Sqmm Epoxy Terminating Kit Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable

60.12) 240 Sqmm Aluminium End Terminal (Lug)

64.02) 16 Sqmm Lug Aluminium End Terminal (Lug)

68.08) Route & Joint indicating slab with MS Anchor rod

63.01) 25 mm Brass Cable Gland

5.7.2) 32Amps Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

5.13.1 ) 25 Amps Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 R...

5.18.7) 6-32 A TPN MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 ...

5.47) 3-120sec setting. Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,

5.42.3) 18 SWG MS Box Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinge...

3.9 Hylum plastic sheet Supplyingandfixinghylumplasticsheet3mmthickwithnecessarynitchesforfixingswitches,regulatorsetc.,andfixingonexistingwood or metal box using N. F. screws.

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated 1100Vgrade,multistrandcopperwirewithlowconductor resistance singlecore inopenorconcealedsystemofwiringwithspecifiedIS694:2010

21.06) 35 to 95 Sqmm Sqmm Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sqmm

5.01) Releasing of 2 Pin cross arm with Insulator and Braces fixing

Releasing of Conductor Weasal

68.06 Cable Covering Tile 125x250x40 mm

32.14) 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1...

60.08) 120 Sqmm Aluminium End Terminal (Lug)

60.07) 95 Sqmm Aluminium End Terminal (Lug)

35.02 3.5 x 70/95/120 Sqmm Epoxy Terminating Kit Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable

22.15 120 to 240 Sqmm Heat shrinkable Type Terminations

13.4.1 Single bracket 1.5 m. Length Supplying andfixing telescopic M.S. bracket fabricated byusing 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long M.S.Bracketandareweldedwithsuitableang...

11.9.1 LED Floodlight 70W Supply & Fixing of LEDFlood Lightwith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with ...