SPECIAL REPAIRS TO CEILING AND REPLACEMENT OF CONVENTIONAL LIGHT FITTINGS WITH LED FITTINGS INCL CONNECTED WORKS AT BLDG NO GH-87 AT DSSC WELLINGTON.

Amount

B/R PORTION Demolition of unreinforced concrete on roofs, floors (other than ground floors), beams/ chajjas and similar suspended work including cleaning the surfaces and removing unserviceable debris off the premises all as specified and as directed.

Dismantling single layer mangalore pattern or similar tiles in roofing including screed bed of any thickness complete all as specified and directed.

M & L for providing 30 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof padding / leveling course kerbs, or chamfered on edges finished even and smooth with using extra cement and mixed with water proofing compound as per manufacturer's instruction complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

M & L for providing 5mm thick Screed bed or bedding layer in CM (1:3) when the padding concrete is green and mixed with water proofing compound as per manufacturer's instruction complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

M & L for providing 10mm thick Screed bed or bedding layer in CM (1:3) when the padding concrete is green for floor finishes and mixed with water proofing compound as per manufacturer's instruction complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for providing and applying brush applied water based PU dispersed polymer modified elastomeric liquid membrane, ShaliUrethane BTD with Zero VOC of any approved make to form the membrane in situ at site with 3 layers of monolithic, seamless finish having > 500% elongation. The first layer is to be formed mixing with clean water in the ratio of 1:1 @200 gms per Sqm and shall act as the prime coat to fill in the cavities, this can be brush or roller applied. For spray applicaiton, use any airless spray system with recommended nozzle size at 30:1 at 2 bar pressure. Applying the second coat @ 1 Kg per Sqm using with soft brush, roller or spray system with the recommended nozzle size on the primed surface providing and applying 50 Gsm fiber cloth over the 1st coat, when substrate till the coat is tacky. Providing and applying 3rd coat @ 1 Kg per Sqm to finish the application for a thickness of 1.5mm thickness formed in place. The second coat should be applied perpendicular to the first coat to cross linkage complete all as specified as per manufacturer's instruction and as directed. Make : Asian/STP/Dr. Fixit

M & L for providing and laying 3 mm thick APP modified waterproofing membrane , weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyester matt black finished weighing not less than 160 g/Sqm having softening point not less than 150 degree celcius longitudnal tensile strength not less than 300 N/Sqcm , 10 cm overlap and 15 cm for end laps , over a coat of bitumen primer @ of 0.20 Kg/Sqm and finished with bituminous aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacturer's instruction and as directed. Make : Asian/STP/IWL Note:-The work shall be carried out by authorised applicator of manufacturer.

M & L for providing heavy duty vitrified stonex tiles of size 600 x 600 x 10mm thick of any colour (square/rectangular) polished in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed 15mm thick in CM (1:4) complete all as specified and as directed. Make : Somany/Kajaria

M & L for cutting of grooves of 10-15mm wide and 15- 20mm depth on roof tiles and filling with chemical grout /sealing compound complete all as specified as per manufacturer's instruction and as directed. Make : Cera/STP/Asian/Fosroc

M & L for providing cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerb or mud stops, rounded or chamfered on edges etc.,complete all as specified and as directed.

Taking down wooden door chowkats exc 1.5 Sqm and n.exc. 4 Sqm each including shutters (without taking of the shutters from the frame) complete all as specified and as directed.

Demolition of brick work/stone masonary work built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing unserviceable debris off the premises all as specified and as directed.

S & F stainless steel tube of any dia or thickness as in door/gates etc including necessary plates, bolts and welding work required complete all as specified and as directed.

S & F 1.00mm thick stainless steel sheeting as in roof covering fixed with screws /welding and bent to a curve (of any radius) complete all as specified and as directed.

M & L for UPVC door white/coloured all as per manufacturer's direction and following specifications all as directed :- (i) The profile for costruction of UPVC door shall be of overall size 60 x 58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. (ii) The corners shall be plastic welded. (iii) The hinge side of vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm + or - 0.1mm. (iv) The door shall be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 3 Nos on each side. (v) The top portion of door shall be provided with plain glazing of 6 mm thick fixed to door shutter with UPVC standard beadings of 24.5 x 16 mm of 2 mm thick. (vi) The bottom portion of door for 1 m height shall be provided with UPVC hollow board not less than 6 mm thick. (vii) The door shall be provided with :- (a) Moritise lock of brass size minium 100mm four lever with two keys as per manufacturer's specification. (b) Two Nos of fan light pivot size 170mm on one shutter. (c) 03 Nos of 3D hinges on each shutter. (viii) All the fittings shall be provided with using self tapping screws. Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed. Make: Madhu Industries / AMD Overseas Ltd/Gadli Industries/ Simta Astrix

M & L for White/ Coloured UPVC fixed partition with 5mm thick glass glazing UPVC material all as per manufacturer's direction and following specifications all as directed :- (i) Frame shall be of extruded UPVC section having over all dimention of 60 x 58mm with wall thickness 2.7+ 0.2mm extruded section. (ii) Corners of wall frame shall be joined by MS galvanized brackets. Joints mitred and plastic shall be welded . The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1.2mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. The fixed partition shall be fixed to frame with UPVC standard beadiings of 24.5 x16mm of 2mm thick. (iii)The glazing shall be of 10mm thick toughned glass with stickering as approved by GE all as specified and directed. Make : Madhu Industies Ltd/AMD Overseas Ltd /Gadli industries/ Simta Astrix

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and suspension grid complete all as specified and as directed.

M & L for second class hardwood plain fillets square, rectangular or traingular in section, clean sawn, secured with nails or brads in sectional area exc 13 Sqcm and n.exc 25 Sqcm, plugging to wall with screws all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote all as specified and as directed.

M & L for 12mm thick plywood grade BWP type BB fixed with screw to timber frame complete all as specified and as directed.

M & L for 4mm thick veneered decorative plywood grade I (with BWR resin) decorative veneers on one face only fixing with suitable adhesive as per manufacturer's instructions and as directed.

M & L for applying two or more coats of French polishing on wooden surfaces of any description any width or girth including cleaning and preparing the surface including a coat of wood filler followed by sealer on new wooden works all as specified and directed.

M & L for first class hardwood for beading /nosing /moulding as in cornices columns corners etc of cross sectional area exc 15 Sqcm and n.exc 25 Sqcm all as specified and as directed.

M & L for 12mm thick Gypsum board customized ceiling with and including aluminium frame work all as per manufacturer's instructions in multi level, any shape and design as approved by GE and applying two coats of plastic emulsion paint over a coat of primer and wall care putty complete all as specified and directed. Make : Gyproc from Saint Gobain (India Gypsum Ltd)/ Gyptech/ Armstrong/ Aerolited/ Jolly Board Mumbai.

M & L for Gypsum board ceiling 12 mm thick with using GI frame work including plaster of paris decorative type cornices of 125-150mm height any shape as approved by GE and applying two coats of plastic emulsion paint over and including one coat of primer and wall care putty any shape as required all as specified and as directed. Make : Gyproc from Saint Gobain (India Gypsum Ltd)/ Gyptech/ Armstrong/ Aerolited/ Jolly Board Mumbai.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone wall etc., including racking out joints, hacking for key,scrubbing down with water etc., and removing unserviceable debris off the premises all as specified and as directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M& L for rendering 15mm thick in CM (1:4) mixed with WPC as per manufacturer's instruction on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid seperately.

M & L for preparing new plastered surfaces of walls and applying two coats of plastic emulsion paint (coloured/white) over a coat a primer with brush /roller over and including one coat of wall care putty, finished even and smooth complete all as specified and as directed.

M & L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of plastic emulsion paint (coloured/white) over a coat a primer and wall care putty with brush/roller finished even and smooth complete all as specified and as directed.

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper(coloured/white) over a coat a deco prime primer with brush/roller finished even and smooth and one coat of putty complete all as specified and as directed.

M & L for applying two coats acrylic emulsion (anti-fungal) paint over a coat of primer over one coat of primer complete all as specified and directed.

M & L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of Oil bound distemper (coloured/white) over a coat of primer and wall care putty with brush/roller finished even and smooth complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing serveciable tiles to store and rubbish off the premises all as specified and as directed.

M & L for vitrified ceramic jointless tiles 10 mm thick, light shade (square/rectangular) area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Description all as per Item No 37 above but on vertical surfaces such as skirting, dado and risers etc., laid over and including 10 mm thick rendering/ backing coat in CM (1 :4) complete all as specified and as directed.

M & L for providing precast cement concrete (1:3:6) solid building block or slabs, type C-1 (using 20mm graded stone aggregate)100mm thick (with plain or interlocking joints as directed) setting in CM (1:4) complete in walls all as specified and as directed.

M & L for RCC (nominal mix) (1:2:4) type B-1 ( using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc., complete all as specified and as directed.

M & L for use and waste of timber as in form work to sides and soffits of roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc., also splays between floors and beams etc., for fair finished surfaces of concrete flat all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

M & L for Granite stone slab flooring /platform of approved colour (Jet black) 16-18 mm thick machine cut, rounding edges , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and directed.

M & L for Granite stone slab of approved colour (Jet black), 16-18 mm thick machine cut, as in skirting/ dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing, laid over and including 15mm thick plaster in CM (1:4) complete all as specified and as directed.

S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size (915mm x 460mm) of bowl size (410mm x 330mm x160mm) complete all as specified and as directed.

S & F in repair 15 mm bore sink cock with regular swinging spout (wall mounted model) with wall flange of Make : Jaquar, Cat No : QQT-7347 or equivalent in Prayag/ Parryware/ Hindware/ Cera all as specified and as directed.

Taking up or down 15 mm bore/ 20mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

S & F 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls/ ceilings or laid in floors all as specified and as directed.

S & F 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls/ ceilings or laid in floors all as specified and as directed.

M & L for 12mm thick HDHMR board both side laminated, any colour to be fixed with screw's as in shelf, cup boards etc including synthetic edge tape 1.3mm thick edge for exposed surfaces, pasting using suitable adhesives all as per manufactures instruction, complete all as specified and directed. Make : Action Tesa/ Century Premium Plus/ Greenply/ Associates

M & L for 18mm thick HDHMR board both side laminated any colour to be fixed with screw's as in shelf, cup boards etc including synthetic edge tape 1.3mm thick edge for exposed surfaces, pasting using suitable adhesives all as per manufactures instruction, complete all as specified and directed. Make : Action Tesa/ Century Premium Plus/ Greenply/ Associates

S & F 5mm thick plain glass for window with suitable accessories all as specified and as directed.

S & F 50mm dia, polished, hard wood knobs fixed with screws all as specified and as directed.

S & F Cold rolled steel, stainless steel finish Telescopic Drawer hinges of 600 mm depth with suitable accessories all as specified and as directed. Make : Godrej/Hettich or equivalent.

S & F Cold rolled steel, stainless steel finish modular hinges of any angle with suitable accessories all as specified and as directed. Make : Godrej/Hettich or equivalent.

S & F 150 mm stainless steel modular handle fixed with suitable screw all as specified and as directed.

M & L for complete removal of existing treatment on wall and applying two coats of oil bound distemper over one coat of primer over and including one coat of wall care putty complete all as specified and directed .

M & L for preparation of old plastered surface of internal wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M & L for old plastered surfaces of walls and applying one coat of oil bound distemper (coloured/white) all as dirceted and as specified.

M & L for complete removal of existing treatment from old ceiling surfaces and applying two coats of oil bound distemper (coloured/white) over a coat a deco prime primer and wall cate putty with brush/roller finished even and smooth all as specified and as directed.

M & L for prepartion of old ceiling surfaces and applying one coat of oil bound distemper (coloured/white) finished even and smooth all as specified and as directed.

M & L for preparing old painted wooden surface and applying two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.

M & L for complete removal of existing treatment on wall and applying two coats acrylic emulsion (anti-fungal) paint over a coat of primer over one coat of primer over and including two coats of wall care putty complete all as specified and directed.

M & L for preparation of old plastered surface of external wall and applying one coat of acrylic emulsion (anti-fungal) paint complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and as directed.

S & F 3mm thick ,solid polycarbonate sheet as in shape and colour as approved by GE as in roof, fixing with self tapping screw and joints of polycarbonate sheet shall be sealed with silicon with and including aluminium strip/ties etc required for fixing all as per manufacturer's instructions complete all as specified and as directed.

Dismantling timber scantling framed work 40 Sq Cm and over in section, in any position complete all as specified and as directed.

M & L for mild steel work in tubular trusses, sections including special shaped washer, plates, angle cleats etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified and directed.

M & L for preparing new surface of steel and applying two coats of synthetic enamel paint over a coat of primer exc 10 cm width or girth complete all as specified and as directed.

E/M PORTION Taking down old, unserviceable aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors etc as per existing original surfaces complete all as specified and directed.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors etc as per existing original complete all as specified and directed.

Disconnecting /dismantling of old existing unserviceable DB's any way 240 /415 Volts with their old/un serviceable burnt MCCB /MCB's etc. complete all as specified and directed. Note for Item Nos 70 to 72 :- Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for concealed point wiring with two single core 1.5 Sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 Sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing/original surface etc. complete all as specified & as directed for One Light /fan etc. point controlled by one switch 5/6 Amps. Make of cable : Havells/Polycab/Finolex.

Description all as per Item No 73 above but One switch socket outlet point 5/6 Amps on independent board complete all as specified and as directed.

Description all as per Item No 73 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed. Note for Item Nos 73 to 75 :- (i) Modular metal flush boxes shall be measured & paid separately. (ii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for concealed sub-main wiring alongwith earth wire of size (4 x 6.0) Sq. mm + (2 x 6.0) Sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc as per existing/original surfaces complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note : (i) 04 runs of PVC wire, 02 runs of earth wire & one run of PVC rigid conduit (medium grade) shall be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.0) Sq. mm + (1 x 4.0) Sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc as per existing /original surfaces complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note: (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) shall be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 2.5) Sq. mm + (1 x 2.5) Sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc as per existing /original surfaces complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note: (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) shall be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

S & F Modular switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW061 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW161 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree, Cat No : ACVKSWW063 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree, Cat No : ACVKCWW163 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab Note for Item Nos 76 to 82 : Design /Drawing /Technical catalogue /specifications along with comparative Rate Analysis to be submitted to the Engr-in-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make /Model /Cat /Part Ref concerned.

S & F concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX01/02 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX06 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F modular cover plate suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV01/02 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F modular cover plate suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab

S & F modular cover plate suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV06 or techno-commercially equivalent in Legrand /Anchor Roma /Polycab Note for Item Nos 83 to 88 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor

S & F wall / surface mounted LED light fitting 10 W or next higher rating (2 FT), CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size incl flexible hose complete all as specified and as directed. Make : Luker, Cat No : LT510 or techno-commercially equivalent in Philips/Jaquar/Havells.

S & F wall / surface mounted LED light fitting 14 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size incl flexible hose complete all as specified and as directed. Make : Luker, Cat No : LWL114-2 or techno-commercially equivalent in Philips/Jaquar/Havells.

S & F LED circular shape slim panel ceiling RECESS light fitting 15 W or next higher rating with dimension 173mm x 20 mm, CRI > 80, CT=3000 K (Warm White), integrated type, with high efficiency electronic driver, surge suppressor/ protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size all as specified and as directed. Make : Luker, Cat No : LNPR15 or techno-commercially equivalent in Philips /Jaquar /Havells.

S & F LED circular shape slim panel ceiling RECESS light fitting 6 W or next higher rating with dimension 120mm x 20 mm, CRI > 80, CT=3000 K (Warm White), integrated type, with high efficiency electronic driver, surge suppressor/ protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size all as specified and as directed. Make : Luker, Cat No : LNPR06 or techno-commercially equivalent in Philips /Jaquar /Havells.

S & F LED picture light 240 V, 7 watts , CT=3000 K (Warm White), CRI ≥ 80 , Luminous Efficacy ≥ 100 lm/ W ,bronze finish , Flexible neck for adjusting light beam, wall or surface mounted with electronic driver, with all accessories internally prewired and including connecting up with twin/three core twisted flexible cable of suitable size complete all as specified and directed. Make : Philips, Cat No :31402 or techno-commercially equivalent in Jaquar /Luker.

S & F LED spot light 240 V, 6 watts , CT=3000 K (Warm White), CRI ≥ 80 , Luminous Efficacy ≥ 100 lm/ W ,medium beam angle 36 degree, surface mounted or clip mounted with electronic driver, with all accessories internally prewired and including connecting up with twin/three core twisted flexible cable of suitable size complete all as specified and directed. Make : Philips, Cat No :BGP310 3xLED- HP/WW 220-240V 12 1N or techno-commercially equivalent in Jaquar /Luker.

S & F wall mounting 2 LT Opal Frosted Glass with Chrome finish, Dimension : L - 310 mm, W - 160 mm, H - 200 mm, with & including 02 Nos of LED lamps of 5W, 400 Lumen, CT=3000 K (Warm White), candle type with E-14 base cap, with all lamps and accessories internally prewired and including connecting up with twin/three core twisted flexible cable of suitable size all as specified and as directed. Make : Jaquar, Cat No KCH-CHR-MB160275212A (For W/M fitting) or techno-commercially equivalent in Philips/ Luker. Make:Havells, Cat No: LHLDEROEMD9X005 ( For lamps) or equivalent in Philips/ Luker.

S & F ceiling mounting 8 LT Opal Frosted Glass Chandelier with Chrome finish, Dimension : D - 700 mm, H - 1200 mm with & including 8 Nos of LED lamps of 5W, 400 Lumen, CT=3000 K (Warm White), candle type with E-14 base cap, with all lamps and accessories internally prewired and including connecting up with twin/three core twisted flexible cable of suitable size all as specified and as directed. Make : Jaquar, Cat No KCH-CHR-MB160275212A (For Chandelier) or techno-commercially equivalent in Philips/ Havells/ Luker. Make : Havells, Cat No: LHLDEROEMD9X005 ( For lamps) or equivalent in Philips/ Jaquar/ Luker.

S & F LED strip light 240 V, 6 watts , CT=3000 K (Warm White), CRI ≥ 80 , SMD LED packaging, with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Luker , Cat No :LS2835 or techno-commercially equivalent in Philips /Havells.

S & F LED strip light driver of 12.5 Amps capacity complete all as specified and directed. Make : Luker , Cat No :LSD12 or techno-commercially equivalent in Philips /Havells. Note : The make of LED stip light driver should be same as that of strip light and sholud be perfectly comatible for the strips .

Supply, install, testing & commissioning of Exhaust fan, Metal body with connected accessories 300 mm sweep, 900 RPM or more, Air Delivery not less than 1275 CMH, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces as per existing/original surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Turbo Force SP or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates

S & F SPN DB, 16 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces as per existing/original surfaces with all other accessories including necessary connection all as specified and directed. Make: L&T, Cat No: DBSPN016DD or techno-commercially equivalent in Legrand/ Siemens.

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disburbed surfaces as per existing/original surfaces with all other accessories including necessary connection all as specified and directed. Make: L&T, Cat No: DBSPN08DD or techno-commercially equivalent in Legrand/ Siemens

S & F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and directed. Make : L&T, Cat No : AU10SS0323C or techno-commercially equivalent in Legrand/ Siemens

S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and as directed. Make : L&T, Cat No : AU10S10323C or techno-commercially equivalent in Legrand/ Siemens Notes for Item Nos 90 to 104 : Design /Drawing /Technical catalogue /specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model /Cat /Part Ref concerned.

Supply, install, commissioning & testing of Single Phase, Transformer based Online UPS system of capacity 10.0 KVA with in-built isolation transformer, indoor compact type complete with battery system & battery enclosure suitable for minimum 01 hour back-up & comprising of the following features all as specified & as directed :

(a) DSP technology with IGBT based inverter. (b) Smart LCD display for real-time information. (c) Inbuilt Over Voltage Cut-Off Device with Surge Protection. (d) Constant voltage constant frequency operation without battery. (e) EMI/RFI Noise filter. (f) Hot Stand-by & Cold start feature. (g) Built-in maintenance by-pass & static by-pass switches (h) Parallel redundancy & battery reverse protection. (j) Configurable Output Voltage Settings. (k) Over temperature indication & protection. (l) Generator compatible.

Brief technical specifications of the Transformer based Online UPS system are as follows : MODEL : (a) Type & Capacity - Single Phase, 10.0 KVA/8.0 KW. (b) DC voltage system - Default : 192 VDC, Adjustable : 216 VDC. (c) Phase - Single Phase with Ground. INPUT : (d) Nominal voltage - 208/220/230 VAC. (e) Input voltage range - 165 ~ 285 VAC. (f) Frequency range - 40 to 55 Hz. OUTPUT : (g) Output voltage - 208/220/230 VAC. (h) Freq range Battery mode - 50 Hz + 0.1 Hz. (j) AC Voltage Regulation - + 1% (Battery Mode). TRANSFER TIME : (k) AC to Battery mode - 0 ms. (l) Inverter to by-pass mode - 0 ms. (m) By-pass to Inverter mode - <5 ms. (n) Waveform - Pure Sinewave.

EFFICIENCY : (o) Overall efficiency (AC mode) - 87%. (p) Efficiency (Battery mode) - 91%. BATTERY & CHARGER : (q) Battery type/No/Make - 12 V, 65 AH/16 Nos/Exide Power Safe SMF Battery or techno-commercially equivalent, for minimum 1 Hour Back-up . (r) Charging current - 2/4/8 A, Default : 8A. BATTERY ENCLOSURE : Battery enclosure shall be MS Powder Coated. INDICATORS : (s) LCD Display - Load Level, Battery Level, AC Mode, Battery Mode, Bypass Mode & Fault indicators. (t) Alarms - Battery Mode, Low Battery, Overload, Fault. Make/Model : i-MAXX Transformer Based Online UPS of make MICROTEK or techno-commercially equivalent of EMERSON/APC.

Notes for Item No 105: (i) Design / drawing / BOM / technical specifications of the complete On-line UPS System incl battery enclosure showing the dimensions is to be obtained from OEM / Auth Channel Partner / Supplier & is to be got approved from Engr-in-charge & GE before placing final order. (ii) Techno-commercial comparative analysis is also to be submitted & got approved from Engr-In-Charge & GE whereever techno-commercial equivalency of the product is concerned w.r.t. given Cat/Part/Model/Make ref. (iii) The cost of periodical/routine servicing/maintenance including minor repairs/replacement of spare parts (if required) including periodical checking of the complete On-line UPS System for the complete defect liability period (2 Years from certified date of completion of work) from the authorized service dealer/rep as & when required/due is deemed to be included in the unit quoted rates. (iv) The complete installation, commissioning & testing of the On-line UPS System is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only (v) Anything missed out in the technical specifications but technically required for efficient working of the On-line UPS System is deemed to be included in the quoted rates. (vi) Necessary electric connections/fixing arrangements shall be as per the recommendations of OEM & cost of the same is deemed to be included in the quoted rates.

S & F DP (2-Way) enclosure, IP-30 for independent mounting of MCB change-over switch fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBENC002SD or techno-commercially equivalent in Legrand/ Siemens

S & F MCB Double Pole, two way with centre-off changeover switch suitable for 400 V AC of rating 63 A complete all as specified and as directed. Make : L & T, Cat No : AUC00206300 or techno-commercially equivalent in Legrand/ Siemens Note for Item Nos 106 & 107 : Makes of MCB DP Enclosure & MCB DP Change-over switch shall be the same.

M & L for surface sub-main wiring alongwith earth wire of size (2 x 10.0) sq. mm + (1 x 10.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC casing-caping (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid casing-caping (medium grade) shall be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. incl taking down old unserviceable earthing complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed.

P K ENTERPRISES

HRML CONSTRUCTIONS