PROVISION OF BUILDING FOR PROCESS AND PERFORMANCE IMPROVED HIGH TEMPERATURE COMPOSITES PPI-HTC AT RCI HYDERABAD

Amount

Lumpsum price worked out by the contractor for Construction of process and performance improved high temperature composite building with RCC framed structure in Block 'A' & 'B' with crumple joint partly galvalume roof sheeting and partly RCC slab complete all as specified and shown on drawings.

Lumpsum price worked out by the contractor for Construction of parking shed for 4 cars and 10 motar cycles with RCC framed structure complete all as specified and shown on drawings.

Lump sum price worked out by the Contractor for “SITE CLEARANCE AND DEVELOPMENT AND EARTHWORK EXCAVATION" as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of `48,53,979.38 inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of `34,644.96 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of ₹13,89,418.42 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for "EOT CRANE” as listed in Schedule ‘A’ Part - V representing _______ % __________________ percent Above / Below the lump sum price of `0.00 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for "FIRE FIGHTING” as listed in Schedule ‘A’ Part - VI representing _______ % __________________ percent Above / Below the lump sum price of `0.00 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for “LIGHTNING PROTECTION” as listed in Schedule ‘A’ Part - VII representing _______ % _________________ percent Above / Below the lump sum price of `2,99,718.60 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for “WATER COOLER” as listed in Schedule ‘A’ Part - VIII representing _________ % __________________ percent Above / Below the lump sum price of `86,820.78 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “DG SET” as listed in Schedule ‘A’ Part - IX representing ______ % _________________ percent Above / Below the lump sum price of ₹47,745.40 inserted by the MES in Schedule ‘A’ Part - IX

Lump sum price worked out by the Contractor for “AIR CONDITIONING” as listed in Schedule ‘A’ Part - X representing ______ % _________________ percent Above / Below the lump sum price of ₹54,534.00 inserted by the MES in Schedule ‘A’ Part - X

Lump sum price worked out by the Contractor for “SPECIAL ITEM” as listed in Schedule ‘A’ Part - XI representing _______ % _______________ percent Above / Below the lump sum price of `0.00 inserted by the MES in Schedule ‘A’ Part - XI

Lump sum price worked out by the Contractor for “FIRE ALARAM SYSTEM” as listed in Schedule ‘A’ Part - XII representing _______ % _______________ percent Above / Below the lump sum price of `4,04,896.00 inserted by the MES in Schedule ‘A’ Part - XII

Lump sum price worked out by the Contractor for “SPECIAL EARTHING” as listed in Schedule ‘A’ Part - XIII representing _______ % _______________ percent Above / Below the lump sum price of `10,89,962.00 inserted by the MES in Schedule ‘A’ Part - XIII

Lump sum price worked out by the Contractor for “ROAD / PATH / CULVERTS” as listed in Schedule ‘A’ Part - XIV representing _______ % _______________ percent Above / Below the lump sum price of `28,38,763.38 inserted by the MES in Schedule ‘A’ Part - XIV

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - XV representing _______ % _______________ percent Above / Below the lump sum price of `1,07,216.18 inserted by the MES in Schedule ‘A’ Part - XV

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - XVI representing _______ % _______________ percent Above / Below the lump sum price of `23,35,670.50 inserted by the MES in Schedule ‘A’ Part - XVI

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part - XVII representing _______ % _______________ percent Above / Below the lump sum price of `2,74,754.17 inserted by the MES in Schedule ‘A’ Part - XVII

Lump sum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part - XVIII representing _______ % _________________ percent Above / Below the lump sum price of `13,00,447.04 inserted by the MES in Schedule ‘A’ Part - XVIII

Schedule 'A' Part-XIX This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as ₹0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item Nos. 21.00 to 58.00.

INTERNAL ELECTRIFICATION S&F, LED tube light fitting 20 W, 230v complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

S&F, flat panel 2 x 2 surface mounting 42W LED luminiar for glare free symmetric soft light with high brightness SMD LEDs complete with all accessories including driver prewired complete all as specified and directed.

S&F, flat panel 4 x 1, 42watt LED surface mounting luminaire suitable for wall / ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified and directed.

S&F, recess mounting LED luminaire power consumption 36W or less system lumens output 4250 or above, CCT ≥5700 suitable for Armstrong / Grid ceiling with high brightness SMD LEDs complete with all accessories including driver prewired complete all as specified and directed.

S&F, light duty, metallic exhaust fans AC single phase 230/240 V of size 300 mm sweep with louver complete all as specified and directed.

S&F, BLDC BEE 5 star ceiling fans complete with electronic type regulator operation, 230V, 1200mm sweep power consumption less then or equal 32W complete all as specified and directed.

Sheet metal enclosure for prewired distribution board double door, vertical type powder coated triple pole & Neutral 8 way with out MCCB, three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed.

Supply, install, testing & commissioning, factory made and tested, CPRI approved LT panel board indoor type, weather, dust and vermin proof, free standing floor mounting type mounted on floor, separate cable alley for all the feeders, suitable for 440Volts, 3 Phase 4wire 50Hz AC supply system, conforming to IS, IP-54 class protection and made of 2mm CRCA mild steel sheet & angle iron frame, compartmentalized with rubber gasket hinged doors, front & rear opening and locking arrangement (including provision of 65mm Godrej (freedom) lock with 2 keys) with necessary bus bar arrangement with electrolytic grade aluminium bus bar 1000Amps rating for phase and neutral 4 strips with colour coded PVC sleeves, installed on epoxy insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for MCCBs, copper control wiring of required size for instruments and duly powder coated on the outside and inside including air ventilation for heat dissipation, suitable size knock out holes for cable glands, cable gland and lugs for incoming and outgoing cable etc., independent multilayer chambers to accommodate complete all as specified and directed including the following accessories:-

a) Aluminium bus bar suitable capacity TPN, full for phase and neutral with colour code PVC sleeves - 01 Job. b) LED RYB indicating lamps - 01 set. c) LED ammeter and voltmeter witn necessary CTs and display of required rating. d) MCCB 630 Amps, 4 pole, 415 Volts - 01 No (Incommer). e) MCCB 125Amps, 4 pole, 415 Volts - 03 Nos (Outgoing). f) MCCB 63 Amps, 4 pole, 415 Volts - 03 Nos (Outgoing). g) ML 4 power contactor - 01 No. h) Digital timer suitable for 3 phase supply - 01 No. j) Panel wiring with PVC Insulated un sheathed single core, 1100 Volts grade cable with copper conductor, multi stranded of suitable size - 01 Job. k) Interconnection of busbar with MCCB, contactor with suitable size aluminium strip - 01 Job. l) Provisioning of cable glands and cable lugs for all incoming and out going cables & connecting the earthing to an earthing test point to main switch board as specified and testing on completion complete all as specified and directed by Engineer-in-Charge - 01 Job.

EOT CRANE Design, supply, install, testing & commissioning of electrically operated over head travelling (EOT) crane double girder of capacity 05 Ton load conforming to IS: 3177 (latest revision) suitable for class II duty having span of 35.00m (approx.), height of lift 6.5m, travel length 36m (approx.) suitable for operation on 415 V, 3 phase, 4 wire, 50 Hz with necessary supporting steel structures with hoist speed 2.0mtrs/min, cross travel speed 5.0mtrs/min, long travel speed 5.00mtr/min with micro drive through clutch and geared motor of suitable capacities with control panel, power and controlling cables, confirming to relevant IS, controlled by pendent push buttons station and radio remote control switch of operation with and including steel wire rope 8mm dia, operation system hoist / cross travel / long travel / electrically operated with pendent DSL system of shorouded bus bar type with following specifications complete all as specified and directed.

(f) Wire rope 6 x 36 made of fiber or hemp core material of size 8mm dia having number of falls 4 confirming to IS: 2266 and tensile strength 1770 N/mm2. Rope drum will be fabricated type stress releived or seamless pipe duly machined and grooved to accomodate full length of rope in one layer. The drum should be mounted on antifriction ball / roller bearings. The circumferential weld joints shall be tested by 100% R-ray quality. (g) Hook is made of EN 3A material type 'C' shank supported on anti friction thrust bearing and the sleeve pulleys shall be made out of malleable cast iron or fabricated confirming to IS: 3815. (h) Gear box shall be totally enclosed type and oil bath lubricated. Gear box body shall be fabricated from MS plate / cast iron as per IS 210. All gears shall be EN8 material finished teeth cut on accurate hobbing machine. Pinions shall be EN 19/24 material and heat treated, all gears and pinions shall ground type so as to reduce noise levels to the minimum. Gear modules shall conform to IS: 3681 and ratings of gear shall be established as per IS: 4460.

(j) Control panels indoor type, made of 2mm thick CRCA sheet, coated with powder coated paint consisting V3F drive, MCCBs / MCBs, contactors, measuring meters, relays, connectors, busbars if requried complete standard protection devices for overload and short circuit shall be provided. (k) Complete wiring with flexible PVC insulated multistranded 1100 V grade copper conductor unarmoured cable of suitable sizes confirming to IS: 7098 (Part-I) 1988. (l) End trucks shall be equipped with spring / rubber buffers and rail sweep for bridge travel. The rail sweep shall be such that it can brush away any object that may fall on the runway. The buffets shall be of substantial design and suitable for engaging the stops at the end of run way. (m) S&F, pendent push button station at an operating voltage of 110 V and IP-65 protection alongwith radio control remote. (n) S&F, 02 Nos. of 70 watts LES lamp & light fitting shall be provided under the bridge and 01 No. shall be provided under CT trolley.

(o) Hoist shall be provided with both rotary and counter weight type (over hoisting and over lowering) shunt, adjustable type limit switches. Limit switch shall be provided for both CT & LT. Two way lever type for CT both direction and LT both direction. (p) PVC flexible festoon type travelling cable system supported on MS trolley moving on C-rail for cross travel. (q) DSL system with 100 Amps PVC shrouded bus bar type. (r) Complete painting of crane with two coats of enamel paint (colour- Golden Yellow) after cleaning and one coat of red oxide primer painting and writing the details of crane like capacity, date of installation, load test details etc. (s) Full length platform shall be provided at the one end for maintenance purpose and two short length platforms shall be provided on the other side.

(t) Hoist 2m per min, cross travel 5m per min and long travel 5m per min alongwith micro speed of 10% of main speed to be achieved through VVVF drive for all three motions. (u) Red indication lamp fitting aviation type for indicating crane movement - 01 No. (v) Radio remote system with all accessories should be multi speed steps of operations. (w) Pendent should be of die cast aluminium lr hard un breakable plastic having push buttons for each motion and it shall be hanged in the middle of bridge gider with crome plated steel chain & duly covered with sleeve. Note: (i) Supply & install of gantry rail is inclusive in the quoted rate. (ii) The rate quoted is inclusive of DSL GI shrouded busbar type of suitable capacity to operate in such a way that crane should work simultenously if required.

(iii) The contractor should take electric supply to the cranes from the incoming cable which will be provided. The rate quoted shall be inclusive of DBs, cables upto DSL of crane and connections cost. No extra payment shall be paid by the department. (iv) The original span length shall be taken at site and the design calculation all technical drawings and specifications as per OEM shall be submitted and take approval before fabriction of crane.

FIRE FIGHTING SYSTEM Supply, fixing, laying, jointing and testing MS pipe 100mm dia, heavy grade, class 'C' conforming to IS : 1239 Part-I including fitting such as coupling, bends, elbows and Tee duly welded joints including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer of any length as required ISI marked for fire fighting system, laid in trenches/walls/ floors etc complete all as specified and directed.

Supply, fixing, laying, jointing and testing MS pipe 80mm dia, heavy grade, class 'C' conforming to IS : 1239 Part-I including fitting such as coupling, bends, elbows and Tee duly welded joints including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer of any length as required ISI marked for fire fighting system, laid in trenches/walls/ floors etc complete all as specified and directed. Note for Sl item Nos. 30 & 31: Excavation and earthwork if requried shall be measured and paid separately under Schedule 'A' Part-II.

S&F, fire hydrant stand post 80 mm dia with single flanged end with provision of single outlet conforming to IS 908 complete all as specified and directed.

S&F, 100mm bore hand operated butterfly valve of pressure not less than 15 Kg / Sqcm with complete set complete all as specified and directed.

S&F, 80mm bore hand operated butterfly valve of pressure not less than 15 Kg / Sqcm with complete set complete all as specified and directed.

S&F, fire hydrant valve oblique pattern of size 63mm, double outlet with hose couplling adaptor of size 63mm size instantaneous spring locks arrangments and blank cap complete as per IS-5290 type 'A' including MS flange washer and providing of 80mm dia MS pipe for tee, cutting, weiding etc complete all as specified and directed.

S&F, fire hose cabinet of size 800 mm x 600 x 250 mm made out of 18 gauge MS sheet with double door having 4 mm thick glass marked with "FIRE POINT AND IN CASE OF FIRE BREAK THE GLASS" in signal red paint for keeping the fire hoses nozzles etc., the MS sheet cabinet shall be painted with a coat of zinc chrome primer and two coats of postal red colour epoxy paint outside and brilliant white inside of approved make and installed near the stand post type hydrant on stuable frame made out of angle iron with four number supporting legs including three coats of paints all as specified and directed.

S&F, fire fighting RRL hose of length 15 mtr confirming to IS 636 type 'A' of size 63 mm dia complete with gun metal heavy duty fire hose delivery instaneous male and female coupling confirming to IS 903 complete all as specified and directed.

M&L for cutting existing MS pipe line of 150mm dia and inserting of tee 150mm x 150mm x 100mm complete including joining earthwork in any type soil complete all as specified and directed.

S&F, branch pipe nozzles stainless steel of size 63 mm dia complete all as specified and directed.

M&L for brick masonry valve chamber of internal dimensions of 750 x 750 x 750 mm including excavation and earth work in any type of soil and 100 mm thick PCC 1:4:8 type D2 foundation, brick work in CM (1:6) plastering internal surface 15mm thick in CM (1:4) PCC (1:3:6) type C1 coping 50 x 50 x 6 mm angle iron 6 mm thick MS plate cover complete with locking arrangement plinting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer all as shown on drawing and as specified.

M&L for cutting the existing roads to a width of 60cm and 75cm in depth for laying GI pipe of 80 to 100 mm bore including returning, filling in and top surface of road 15cm shall be made good with PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed.

LIGHTENING PROTECTION S&f, porcelain /epoxy white / brown / green spacer insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding / fixing roof conductor / down conductor of lightning conductor complete all as specified and directed.

WATER COOLERS S&F, voltage stablizer for automatic operation single phase naturally cooled indoor type & designed for input variation between 170 to 250V which output voltage stablizer 230V with accuracy of 2.5% and capacity 2KVA complete all as specified and directed.

DG SET Supply, installation, testing & commissioning of silent type (DG) Diesel Engine driven generating set having prime power rating of 400 KVA / 320 KW at a power factor of 0.8 lagging, 415 volts, AC 3 phase, 4 wire, 50Hz, 1500 RPM, alternator directly coupled with diesel engine, mounted on common base frame complete with Accoustic enclosure with inbuilt fuel tank, fuel line & accessories, GC foundation work as per manufacturer's instructions, anti vibration pads, OEM recommended standard panel showing standard accessories and comprising the following: - (A) ENGINE (Prime Mover): Diesel Engine, four stroke, inline multi cylinders, liquid / water cooled, turbo charged, air to air after cooled, confirming to ISO 8528 for G3 class performance, capable of giving adequate 1500 RPM to drive alternator capable of delivering minimum 400 KVA (320 KW) at outdoor atmospheric conditions at Hyderabad and capable of taking 10% overload for one hour after 12 hours of continuous operation, complete with the standard fittings / fixtures as per manufacturer and following accessories as specified and directed.

(i) Fly wheel housing and fly wheel. (ii) Air cleaner dry type replaceable paper element type with restriction indicator. (iii) Electronic governor - Class A1. (iv) Dual fuel filter including water separator, fuel pump, fuel injection pump (FIP) and injectors (v) Radiator, fan & water pump assembly. (vi) Forced lubrication - Pump, lub oil filter & lub oil cooler. (vii) Exhaust silencer. (viii) Exhaust gas driven trubo charger. (ix) First fill lub oil and coolant and diesel during commission and testing. (B) ALTERNATOR: Alternator shall be self excited, self regulated, brushless for 400 KW / 320 KVA at the speed of 1500 RPM at 415 volts, 50 Hz, 3 phase, 4 wire system with advance electric voltage regulator to ensure high voltage accuracy with +1% with class H insulation and SPDP enclosure IP 23 ingress protection, directly coupled with engine through flexible coupling and confirming IS-4722 complete - 01 No.

(C) BASE FRAME & FOUNDATION: Common base frame for engine & alternator made from structural steel channel. PCC foundation including adequate number of suitable anti-vitration pads all as per the recommendation of manufacturer. (D) ELECTRICAL STARTING SYSTEM: Electric starting system with battery charging alternator and axial type starter motor including adequate number of high capacity maintenance free lead acid battery 180AH capacity each as recommended by OEM / manufacturer including interconnecting cables / leads with terminals complete with starting / stopping switch, voltmeter - 01 set.

(E) ACOUSTIC ENCLOSURE: Corrosion resistant, acoustic and weather proof enclosure with durable industrial locking system on doors, doors with gasket made of high quality EDPN material, with arrangement for fresh air intake for cooling of engine & alternator, extraction and discharging of hot air to the atmosphere, made out of CRCA sheet with 11 tank pretreatment process and UV resistant powder coating and high quality noise absorbant & fire retardant grade acoustic insulation material (Rockwool) complying to IS 8183 well suitable for 400 KVA DG set to reduce noise level to 75db (A), measured at 1.00, meter distance @ 75% load under field condition and 70db (A) at 3m distance @ 100% load confirming to CPCB II norms.

Enclosure will have inbuilt base frame mounted fuel tank of capacity min 800 litres fabricated out of 4 SWG MS sheet mounted inside the encloser alongwith fuel piping from tank to engine capacity as recommended by OEM with drain valve, air vent, inlet, outlet connection and suitable exhaust pipe duty cladded with glass wool and covered with aluminium sheet inside the enclosure and exhaust trail pipe with muffer complete all as per manufacturer's design. (F) DG SET MOUNTED INSTRUMENT PANEL: Fitted with & having digital display for the following: - (i) Starting switch on / off. (ii) Coolant temp indication. (iii) Hour meter cum RPM indicator. (iv) Lub oil pressure indication.

(v) Lub oil temperature (vi) Battery charging indication (vii) Over speed indication, low lubrication oil indication. Note: 1. (a) DG set shall be installed over the foundation as recommended by OEM however minimum 0.5m space should be available all around the DG set and height of plinth shall not be less than 0.5m. Any civil work including miscellaneous work not covered under the scope of the work but required for satisfactory completion of job deemed to be inclusive in the unit quoted rate. (b) Contractor shall submit the detailed specification, particular model, make and literature of DG set alongwith drawings for approval of GE before placing of order.

(c) The switch gear, accessories and other items to be incorporated into Synchronising panel to be got approved from GE before placing the order. (d) The contractor shall arrange diesel / oil / coolant and artifical load for testing for final testing, recording readings of DG set at site. The cost deemed to be included in the quoted rate. (e) Operation & maintenance catelogue, overhauling manual, spare parts list will be provided as per manufacturer standard practice. 2. Output from alternator to synchronizing panel would be through bus duct of suitable capacity for each DG set and termination at alternator end should be suitable for bus duct connection.

(G) AMF CONTROL PANEL: Factory made cubicle type floor mounted LT panel board, indoor type made out of 2mm thick CRCA sheet for load bearing member and doors and covers made out of 16mm thick MS CRCA sheet, front opening type, protection class IP-52, duly powder coated RAL 7035 (50 micron minimum) after seven tank process, having aluminium bus bar of 630 Amps capacity for four poles, with all standard switch gear and protection, internal wiring of adequate size PVC insulated multistanded copper conductor cable etc and consisting of following: - (i) 600A, 4 pole, MCCB rupturing capacity 50 KA - 02 Nos. (ii) 4P power contactor, 630Amps, 415 volts AC 1 duty - 02 Nos.

(a) The Emission limits of DG sets upto 800KW / 1000 KVA shall be incorporated as per the latest CPCB norms as published by the Gazette of India New Delhi dated 03 Nov 2022 vide S No. 716 Extraordinary Part-II Section 3 - Sub Section (i) and emission limits shall come into force from 01 Jul 2023. (b) The emission limits shall be tested through one of the five CPCB approved / recognized labs as mentioned below: - (i) Automatic Research Association of India, Pune (Maharashtra). (ii) International Centre for Automative Technology, Manesar (Haryana). (iii) Indian Oil Corporation, Research and Development Centre, Faridabad (Haryana). (iv) Indian Institute of Petroleum, Dehradun (Uttarakhand).

(v) Vehicle Research Development Establishment, Ahmednagar (Maharashtra). (c) The cost of incorporation of Emission Standards and testing is included in rate quoted by the contractor. (d) DG set manufactured prior to 01 Jul 2023 shall not be allowed / acceptable.

AIR CONDITIONING Supply, install, test & commissioning split type air conditioning unit (inverter type) complete with driver motor air cooled condenser with all assessories varied speed and dual rotary compressor including fixing the out door units as per manufacture recomendation and fixing of room (high wall) unit on wall provoding and making interconnection including refregrant piping with nitryle rubber insulation and control cable from indoor to outdoor up to a distance of 3 meter power cabling (max 3 meter from isolator / encloser) to unit, first recharging of refrigrant gas incliding cordless remote, drain pipe of 25mm dia for connecting drain line from indoor unit to maximum of 3.0 meters to nearest drain point complete as required capacity of 2TR BEE-5 star rated complete all as specified and directed by Engineer-in-Charge.

Supply, install, test & commissioning split type air conditioning unit (inverter type complete with driver motor air cooled condenser with all assessories varied speed and dual rotary compressor including fixing the out door units as per manufacture recomendation and fixing of room (high wall) unit on wall provoding and making interconnection including refregrant piping with nitryle rubber insulation and control cable from indoor to outdoor up to a distance of 3 meter power cabling (max 3 meter from isolator / encloser) to unit, first recharging of refrigrant gas incliding cordless remote, drain pipe of 25mm dia for connecting drain line from indoor unit to maximum of 3.0 meters to nearest drain point complete as required capacity of 1.5TR BEE-5 star rated complete all as specified and directed by Engineer-in-Charge.

S&F, voltage stablizer for automatic operation single phase naturally cooled indoor type & designed for input variation between 170 to 250V which output voltage stablizer 230V with accuracy of 2.5% and capacity 5KVA complete all as specified and directed.

S&F, voltage stablizer for automatic operation single phase naturally cooled indoor type & designed for input variation between 170 to 250V which output voltage stablizer 230V with accuracy of 2.5% and capacity 4KVA complete all as specified and directed.

SPECIAL ITEM S&F, LED Highbay less than 120W powder coated light fitting suitable for suspension mounting at any height in Hangers / Workshop with aluminum alloy pressure die cast housing and control gear box with high efficiency long life LEDs with lumen output not less than 15000lm, CCT 5700 K or above with specified beam angle to ensure better uniformity of light distribution, IP65 Protection and impact resistance of IK07, built in electronic driver, lower THD, open circuit protection, over surge and voltage protection complete with all accessories complete all as specified and directed.

S&F, air circulator fan single phase, 450 mm sweep non capacitor type suitable for wall mounting, 230V, 50 Hz complete all as specified and directed.

FIRE ALARM SYSTEM S&f, auto dialing system for addressible system consist of storage capacity of 10 to 15 telephone Nos programmable type, complete all as specified and directed.

Supply, laying, connecting and testing of 1.5 sqmm, 2 core PVC insulated, FRLS type 1100 volts grade, armoured multi stranded copper cable red in colour conforming to IS-1554 with latest amendments fixed on surface of wall/ceilings etc with necessary suitable base and clamps duly fixing screws etc complete all as specified and directed. S&F, PVC 2 core 1.5 sqmm FRLS armoured copper cable as per IS:1554 red in colour & drawn through with suitable clamps along wall / roof / false ceiling / floors complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, install, testing & commissioning, factory made and tested, CPRI approved LT panel board indoor type, weather, dust and vermin proof, free standing floor mounting type mounted on floor, separate cable alley for all the feeders, suitable for 440Volts, 3 Phase 4wire 50Hz AC supply system, conforming to IS, IP-54 class protection and made of 2mm CRCA mild steel sheet & angle iron frame, compartmentalized with rubber gasket hinged doors, front & rear opening and locking arrangement (including provision of 65mm Godrej (freedom) lock with 2 keys) with necessary bus bar arrangement with electrolytic grade aluminium bus bar 4000Amps rating for phase and neutral 4 strips with colour coded PVC sleeves, installed on epoxy insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for MCCBs, copper control wiring of required size for instruments and duly powder coated on the outside and inside including air ventilation for heat dissipation, suitable size knock out holes for cable glands, cable gland and lugs for incoming and outgoing cable etc., independent multi layer chambers to accommodate complete all as specified and directed including the following accessories:-

a) Aluminium Bus bar suitable capacity TPN, full for phase and neutral with colour code PVC sleeves - 01 Job b) LED RYB indicating lamps - 01 set c) LED Ammeter and voltmeter witn necessary CTs and display of required rating. d) ACB 2500 Amps, 4 pole, 415 Volts - 01 No (Incomer) e) ACB 2000 Amps, 4 pole, 415 Volts - 01 No (Out going) f) MCCB 200 Amps, 4 pole, 415 Volts - 02 Nos (Out going) g) MCCB 100 Amps, 4 pole, 415 Volts - 02 Nos (Out going) h) MCCB 63 Amps, 4 pole, 415 Volts - 10 Nos (Out going)

(j) ACB of microprocessor released, auxilary switch, 6NO+6NC, AC DC charging motor, closing coil, shunt strip, thermal type - horizontal. k) Panel wiring with PVC insulated unsheathed single core, 1100 Volts grade cable with copper conductor, multi stranded of suitable size - 01 Job l) Interconnection of busbar with MCCB, contactor with suitable size aluminium strip - 01 Job m) Provisioning of cable glands and cable lugs for all incoming and out going cables & connecting the earthing to an earthing test point to main switch board as specified and testing on completion complete all as specified & directed by Engineer-in-Charge - 1 Job

Supply, install, testing & commissioning, factory made and tested, CPRI approved LT panel board indoor type, weather, dust and vermin proof, free standing floor mounting type mounted on floor, separate cable alley for all the feeders, suitable for 440Volts, 3 Phase 4wire 50Hz AC supply system, conforming to IS, IP-54 class protection and made of 2mm CRCA mild steel sheet & angle iron frame, compartmentalized with rubber gasket hinged doors, front & rear opening and locking arrangement (including provision of 65mm Godrej (freedom) lock with 2 keys) with necessary bus bar arrangement with electrolytic grade aluminium bus bar 4000Amps rating for phase and neutral 4 strips with colour coded PVC sleeves, installed on epoxy insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for MCCBs, copper control wiring of required size for instruments and duly powder coated on the outside and inside including air ventilation for heat dissipation, suitable size knock out holes for cable glands, cable gland and lugs for incoming and outgoing cable etc., independent multilayer chambers to accommodate complete all as specified and directed including the following accessories :-

a) Aluminium bus bar suitable capacity TPN, full for phase and neutral with colour code PVC sleeves - 01 Job b) LED RYB indicating lamps - 01 set c) LED Ammeter and voltmeter witn necessary CTs and display of required rating. d) ACB 2500 Amps, 4 pole, 415 Volts - 01 No (Incomer) e) ACB 1250 Amps, 4 pole, 415 Volts - 01 No (Out going) f) MCCB 800 Amps, 4 pole, 415 Volts - 01 Nos (Out going) g) MCCB 630 Amps, 4 pole, 415 Volts - 02 Nos (Out going) h) MCCB 63 Amps, 4 pole, 415 Volts - 10 Nos (Out going) (j) ACB of microprocessor released, auxilary switch, 6NO+6NC, AC DC charging motor, closing coil, shunt strip, thermal type - horizontal. k) Panel wiring with PVC insulated unsheathed single core, 1100 Volts grade cable with copper conductor, multi stranded of suitable size - 01 Job l) Interconnection of busbar with MCCB, contactor with suitable size aluminium strip - 01 Job m) Provisioning of cable glands and cable lugs for all incoming and out going cables & connecting the earthing to an earthing test point to main switch board as specified and testing on completion complete all as specified & directed by Engineer-in-Charge - 1 Job

Cutting the existing roads to a width of 45cm and 60cm in depth for laying GI pipe of 50mm bore including returning, filling in and top surface of road 15cm shall be made good with PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed.

S&F, prefebricated cable tray of size 100 x 80 x 1.5mm including cover of size 100 x 15 x 1mm cable tray can accommodate large number of branc lines and have high load bearing capacity confirming to IS 2629/4759, BS 729, perforated cable tray can be hung using a center rod support complete all as specified and directed.

SEWAGE DISPOSAL Supply & laying on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection with upflow filter including media for 30 users capacity all as shown on drawings, complete all as specified and directed.

Construction of soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25 / SFRC cover, interconnecting pipes RCC / DWC complete filled with brick bats of size 1.8 M dia x 3 M effective depth all as shown on drawings, complete all as specified and directed.

R. Wadhumal and Sons

VERMA BROTHERS

N R Constructions

SUMA ENCON PROJECTS PRIVATE LIMITED

SIDHVI INFRASTRUCTURE PROJECTS LIMITED