Tender ID

DEFPROC

Active

Works

Civil Works

Structural repairs and external smart periodicals of md accn at Basantar Line, NCL, OCL under GE (West) Delhi Cantt-10

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

New Delhi, Delhi | West Delhi, Delhi

Amount: ₹49 LCloses: 14 Nov 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published24 Oct 2026
Submission Opens8 Nov 2026
Closes14 Nov 2026
Bid Opening16 Nov 2026

Tender Value

₹49 L

EMD Value

₹98,000

Closing Date

14 Nov 2026, 6:00 pm5d left

Tender Inviting Organisation

Name

GE (West) Delhi Cantt-10

Address

GE (West) Delhi Cantt-10

Work Description

Structural repairs and external smart periodicals of md accn at Basantar Line, NCL, OCL under GE (West) Delhi Cantt-10

Tender Information

Tender ID

2026_MES_795530_1

Reference Number

GE/DW/TOKEN/108 OF 26-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Class D Category a(i)

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Application addressed to GE West Delhi Cantt (.pdf)

RequiredScanned copy of DD,Bankers cheque (.pdf)

RequiredScanned copy of enlistment letter (.pdf)

RequiredScanned copy of GST Registeration (.pdf)

RequiredScanned copy of EPF Registeration (.pdf)

RequiredScanned copy of Residual Work load for E Class Contractors (.pdf)

RequiredScanned copy of all documents as per NIT For unenlisted contractors (.pdf)

Finance

Requiredboq (.xls)

Requiredtender documents (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE (West) Delhi Cantt

EMD Fee Amount

₹98,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

24 Oct 2026

Published

24 Oct 2026

Bid Opening

16 Nov 2026

Download Starts

24 Oct 2026

Download Ends

14 Nov 2026

Submission Starts

8 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (53 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	(a) Debris obtained from any dismantling or demolition shall be removed beyond MOD land and rates shall be considered inclusive in respective items quoted rates.(b) Contractor shall be liable to taking down and refixing of IGL Gas pipe line and meters if required during execution of work through IGL representative.(c) Contractor shall be liable to repair of electric cable/OFC cable/pipe line, etc. (any description) if damaged during execution of work. (d) Work shall be executed in multistorey bldgs (i.e. upto G+4 incl Mumty). Rate of scoffolding/safety arrangements are included in item rates. No extra amount shall be paid.(e) The contractor will be required to submit MOU with the manufacture of Paint at the time of submission of Performance Security.	-	-	-	-
2	Taking down carefully cement or cement lime plaster,grit plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.Complete all as specified and directed.	1,450	Sqm	-	-
3	M&L 15 mm thick(average) ready mix cement plaster on external surfaces on brick or concrete surfaces complete all as specified and directed.	600	Sqm	-	-
4	M&L for 10 mm thick (average) ready mix cement plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.	700	Sqm	-	-
5	M&L for 5 mm thick (average) ready mix cement plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.	150	Sqm	-	-
6	Material and Labour for PMM 25-30 mm average thickness ( in 2 layers) up to 4th floor level complete all as specified and directed.	130	Sqm	-	-
7	Material and Labour for PMM 40-60 mm average thickness ( in 3 layers ) up to 4th floor level.Complete all as specified and directed.	80	Sqm	-	-
8	PMM repairs at Item No 6 and 7 above shall be done as per following methodology (From sub items (i) to (vi) below)	-	-	-	-
9	i) Chipping of plaster and unsound/weak concrete material till reinforcement bars are exposed, which enable their rust removal vides item ii) below, from slabs, beams, and columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer-incharge including tapering all edges, making square shoulders of cavities etc complete and disposal of debris up for all lifts and leads . Complete all as specified and directed.	-	-	-	-
10	ii) ) Rust removal by Providing and applying , a combination of acid based material, corrosion inhibitors and dispersing agents rust remover, for removal of all rust/ scales/corrosion from reinforcement bars before microconcreting or patch repair,It Shall be applied with brush for complete wetting of rusted metal surface at coverage of 2- 2.5 Sqm/ltr. & allow it to react for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal /steel for about 5-7 days. Before applying any protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.Complete all as specified and directed.	-	-	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.55 MB

Work Item Documents

PS108.pdf

Tender Documents • 1.06 MB

BOQ_892253.xls

BOQ • 1.45 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

(a) Debris obtained from any dismantling or demolition shall be removed beyond MOD land and rates shall be considered inclusive in respective items quoted rates.(b) Contractor shall be liable to taking down and refixing of IGL Gas pipe line and meters if required during execution of work through IGL representative.(c) Contractor shall be liable to repair of electric cable/OFC cable/pipe line, etc. (any description) if damaged during execution of work. (d) Work shall be executed in multistorey bldgs (i.e. upto G+4 incl Mumty). Rate of scoffolding/safety arrangements are included in item rates. No extra amount shall be paid.(e) The contractor will be required to submit MOU with the manufacture of Paint at the time of submission of Performance Security.

Taking down carefully cement or cement lime plaster,grit plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.Complete all as specified and directed.

1,450

Sqm

M&L 15 mm thick(average) ready mix cement plaster on external surfaces on brick or concrete surfaces complete all as specified and directed.

600

Sqm

M&L for 10 mm thick (average) ready mix cement plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.

700

Sqm

M&L for 5 mm thick (average) ready mix cement plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.

150

Sqm

Material and Labour for PMM 25-30 mm average thickness ( in 2 layers) up to 4th floor level complete all as specified and directed.

130

Sqm

Material and Labour for PMM 40-60 mm average thickness ( in 3 layers ) up to 4th floor level.Complete all as specified and directed.

Sqm

PMM repairs at Item No 6 and 7 above shall be done as per following methodology (From sub items (i) to (vi) below)

i) Chipping of plaster and unsound/weak concrete material till reinforcement bars are exposed, which enable their rust removal vides item ii) below, from slabs, beams, and columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer-incharge including tapering all edges, making square shoulders of cavities etc complete and disposal of debris up for all lifts and leads . Complete all as specified and directed.

ii) ) Rust removal by Providing and applying , a combination of acid based material, corrosion inhibitors and dispersing agents rust remover, for removal of all rust/ scales/corrosion from reinforcement bars before microconcreting or patch repair,It Shall be applied with brush for complete wetting of rusted metal surface at coverage of 2- 2.5 Sqm/ltr. & allow it to react for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal /steel for about 5-7 days. Before applying any protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.Complete all as specified and directed.