REPAIR AND REPLACEMENT TO BOUNDARY WALL, FENCING, DRAIN, PATH, HARDSTANDINGETC AT SOMGARH MIL STATION UNDER GE970EWS.

Amount

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) complete all as specified and directed

All as per Serial item No. 2 above but except Bricks.

M&L for walling of random rubble, brought up to course, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

M&L for walling of random rubble, brought up to course, well bonded, bedded and solidly hearted, built in CM 1:6 but except stone complete all as specified and directed.

Material & labour for PCC (1:2:4) type C-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

Taking down cement plaster on bricks or stone walls etc., including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Material & labour for 15mm thick cement plaster in cement mortar (1:6) on other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material & labour for precast cement concrete 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:6 as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating, cover slab for manholes, coping, benching etc complete with joints to match and including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.

Material & labour for hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

Material & labour for PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in surface channels,drains complete all as specified.

Extra for forming fair finish to drain or channels 30cm internal girth in cement concrete using extra cement incl forms, moulds/mitred stopped ends in manholes etc complete all as specified.

Material & labour for mild steel high yield strength TMT bars 6 to 8 mm dia cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for 80mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over 25mm thick dry sand cushioning including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer in Charge.The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

Material & labour for 60mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over 25mm thick dry sand cushioning including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer in Charge.The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

M&L for pre polished coloured chequered cement concrete tiles 30cmx30cmx 20mm thick made with electro vibro technology with rubber/ PVC moulded set, jointed and pointed in neat cement slurry in floors with white cement & pigment over laid screed bed or bedding layer of mortar 15mm thick(1:4) for laying floor finishes and including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed by Engineer in charge.

S&F for providing precast kerb stone cement concrete 1:2:4 type-B1 using 20mm graded aggregate of 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:3, complete, in walls complete all as specified and directed by Engineer in Charge.

Material & labour for new surfaces of walls and applying two coats of cement base paint on plastered and other surfaces complete all as specified and directed.

Material & labour for preparation of old plastered surface of wall and applying one coat of cement base paint on plastered and other surfaces complete all as specified and directed.

Material & labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing/ scrapping down smoke soot mould, mass and efflorescent salts, trading off and greasy spots upto true finished surface as required to receive two coats of exterior emoulsion paint complete all as specified and directed by Engr -in-Charge.

Dismantling Wood/ RCC/ steel posts or struts any section of security/cattle fencing including taking out embedded portion and making good disturbed ground, posts embedded in concrete complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick & removing the surplus spoil at adistance exc. 50m & not exc. 100m complete all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Supply and fix in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed wire with 2mm dia barbs at 75mm spacing and type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

Supply and fix in repair mild steel galvanised chain link fencing including lines wire, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and as directed. Note : Iron section shall be measured and paid separately.

Supply and fix MS/ Wrought framed work such as fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but not exc 10cm long and dia of neck 11 to 15mm complete all as specified and directed.

Material & labour for preparation of old painted steel and iron surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 all as specified and as directed by Engr-in-Charge.

Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for welding in repair n exc.2.5 cm in length for thickness of metal not exc.6 mm complete all as specified.

M/S GHULAM HASSAN KUCHAY

M/S SHOWKAT AHMED WANI AND SONS

M/S Sultan Enterprises

M/S ADIL CONSTRUCTIONS