SPECIAL REPAIR/REPLACEMENT OF JOINERY AT RESIDENTIAL BUILDINGS OF AJAY BAUGH LANE-6 UNDER AGE B/R-I AT GE MINNIE BAY PORT BLAIR

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames exceeding 1.5 sq.m and not exceeding 4 sqm each with shutters without taking off shutters from the frames and removing off site etc complete all as specified and directed by Engineer-in-Charge.

Refixing shutter of any description not exceeding 1 Sqm in the same location complete all as specified and directed by Engineer-in-Charge.

Refixing shutter of any description exceeding 1 Sqm and not exceeding 2 sq m in the same location complete all as specified and directed by Engineer-in-Charge.

S&F Powder Coated aluminium frame (minimum thickness of powder coating 50 microns) for doors,windows, ventilators with one or more rebates including joining cleat for fixing, screws etc complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium Powder Coated section (minimum thickness of powder coating 50 microns) in Door / window / Ventilator/partition shutters, side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge. Note:- Weight of aluminium sections handles,hinges and locking arrangements shall be considered for payment. However cost of rubber packing required in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, glass & aluminium wire cloth as required shall be measured and paid separately in 'supply only' items.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed by Engineer-in-Charge.

Supply and fix Sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n.exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.

Supply only Sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n.exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.

Supply only 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix Powder Coated aluminium grill (minimum thickness of powder coating 50 microns ) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge.

Demolition of Precast Concrete work/ precast concreteblock built in Cement Mortar including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 (river sand)and finished fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster on fair faces of concrete block masnory in two layers, base layer 10mm thick in CM (1:6) and top layer 5mm thick in CM 1:4(with river sand) mixed with WPC as per manufacture' s instructions, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid seperately

Supply only water proofing compound

M&L preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old surfaces of wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over complete all as specified and directed by Engineer-in-Charge.

S & F in repair 18 to 20mm thick prelaminated MDF boards of interior grade type-II of approved shade for kitchen cabin/wardrobe/wall panelling fixing with necessary fitting like keku fitting,spring clip,hanger plate, modular/piano hinge/clip, hasp and staples, aluminium handle, push fix or stud fitting as per manufacturers instructions including 0.9mm decorative laminate with necessary adhesives complete all as specified and directed by Engineer-in-Charge.

Supply and fix Pressed steel frames of 105 x 60mm for doors with one or more rebates including ecessary fixing lugs, hinges, lock strike plate, etc including two coats of ready made Paint or Powder coated complete, as specified, supplied and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix Pressed steel frames of 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including two coats of ready made Paint or Powder coated complete, as specified, supplied and fixed complete all as specified and directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete 1:3:6 Nominal mix type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and directed by Engineer-in-Charge.

S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM (1:3) or PCC (1:2:4) Type B-1 as required complete all as specified and directed by Engineer-in-Charge.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing Plain Cement Concrete with type B0 1:2:4 (12.5 mm graded aggregate) Nominal mix as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed by Engineer-in-Charge.

S & F factory made second class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply . The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

S & F factory made flush shutters, solid core construction, 30mm thick with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

S & F factory made second class hard wood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old wooden surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint,complete all as specified and directed by Engineer-in-Charge.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm of any colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of any colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not therwise provided for complete all as specified and directed by Engineer-in-Charge.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Supply and fix butt hinges of stainless steel 100 mm long ISI marked fixed with brass screws complete all as specified and directed by Engineer-in-Charge.

Supply and fix 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed by Engineer-in-Charge.

M/s Shiva Engineering

EXCEL ENGINEERING WORKS

ANDAMAN PAINTS PVT LTD

AR CONSTRUCTIONS

M/S KHUSHICONSTRUCTION