PROVN OF CHAIN LINK FENCING AROUND CERTAIN UNIT AREA AND PROVN OF SECURITY FENCING FOR NFS BLDG AND IN FRONT OF BLDG No. T-152 AT DIFFERENT LOCATIONS OF ALONG MIL STN UNDER GE 872 EWS

Amount

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

Excavating in Post Holes (or similar Holes) in Soft/Loose Soil, each not exc. 0.50 Cum, getting out including spread and levelled with excavated surplus Soils, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork as ordered, complete all as specified and as directed.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Foundation including Rafts, Footing, Foundation Beams for Column Basement Slab, under reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides of Pillars, Posts, Struts, Piers, Columns and Stanchions, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Mild Steel Framed Work as in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., complete, drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for Hanging or Sliding with and including Either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and hanging; also fastening, conforming Fe-410-W (Gde-E250), Quality A and fixing, complete all as specified and as directed

M&L Mild Steel Angle Iron in Posts and Struts in Fencing, cutting Tops to shape as directed including drilling drilling Holes, notching for Wire, etc. including all necessary drilling, bolting or riveting, etc. and Similar work, conforming to Fe-290 Gde E-165, complete all as specified and as directed .

M&L Mild Steel Flat Iron for securing Bolts wih Posts and Struts of Fencing including cutting, drilling Holes, notching for Wire, etc. including all necessary drilling, bolting or riveting, etc. and Similar work, conforming to Fe-290 Gde E-165, complete all as specified and as directed .

M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for large Gates; Hook and Pintle Hinges: large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and similar small Articles conforming to Fe-290 Gde-E-165, complete all as specified and as as directed.

M&L Mild Steel Screw Bolts (machine made) with Hexagonal or Square Heads at One End and screwed the Other, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, Length of Bolt not exc. 5.0 Cm and Diameter of Neck/Shank 5.0mm to 10mm, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) with Hexagonal or Square Heads at One End and screwed the Other, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, Length of Bolt exc. 5.0 Cm but not exc. 10 Cm and Diameter of Neck/Shank 5.0mm to 10mm, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) with Hexagonal or Square Heads at One End and screwed the Other, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, Length of Bolt exc. 10 Cm but not exc. 15 Cm and Diameter of Neck/Shank 5.0mm to 10mm, complete all as specified and as directed.

Supply only Chain Link Fencing 100x100mm Mesh or Cages with 3.15mm or 4.0mm dia Galvanised Mild Steel Wire, complete all as specified and as directed.

Fixing only Chain Link Fencing including Line wires, any mesh, size and type to any type of Standards, Rails, Straining Bolts, etc. and binding with including Provision of Galvanised Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

S&F Galvanised Steel Barbed Wire 2.24mm dia, 2 Strand, Barbed with 2.0mm dia Barbs at 75mm Spacings, Stringing, Tightening and Fixing to Mild Steel Nibs embedded in Pre-cast RCC Fencing Posts, Struts, etc. (as required), securing and tying at Crossings with and including Provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc. complete all as specified and as directed. NOTE : Each Line of Barbed Wire to be Measured for Payment.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing New Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when painted in a different Tint and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M/S L G BUILDERS

M/S RHEGON CONSTRUCTION

M/S NAVA BHARAT BUILDERS