Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC DIPKA KATGHORA KORBA 495452 | KORBA | CHHATTISGARH | 495452 | ₹29.6 L Quoted ₹25.1 L | L1 | Accepted-AOC L-1 |
| 2 | L2₹26.1 L+₹1.0 L (4.13%)Rejected-Finance | ₹26.1 L+₹1.0 L (4.13%) | L2 | Rejected-Finance L-2 |
Tender Value
₹48.6 L
EMD Value
₹60,800
Closing Date
15 Apr 2026, 6:30 pmClosed
STAFF OFFICER, CIVIL DIPKA AREA
OFFICE OF STAFF OFFICER CIVIL,DIPKA AREA CG 495452
Drilling of 04 Nos. of Bore well including Submersible Pump and pipeline along with float valves at Pragati Nagar Colony of Dipka Area
2026_SECL_357731_1
SECL/DA/CIV/e-TENDER/25-26/121 dated 30-03-2026
Open Tender
Civil Works - Others
Percentage
60 days
DIPKA AREA
AS PER NIT
3 documents required · 3 mandatory
₹60,800
12 Aug 2026
30 Mar 2026
17 Apr 2026
30 Mar 2026
15 Apr 2026
31 Mar 2026
30 Mar 2026 - 4 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Drilling of perfectly vertical bore hole of following diameters for construction of Gravel Packed tube well up to desired depth in alluvial formation consisting of Soils, Clays, Sand, Gravel, Moorum, Boulders etc. and retaining the bore hole by using suitable drilling mud or foam or temporary housing pipe including all works pertaining to drilling such as transportation, installation and removal of drilling machineetc. complete. (C) 300 m.m diameter | - | metre | - | - |
| - | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness
5.40 mm | - | metre | - | - |
| - | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia | - | metre | - | - |
| - | Providing gravel packing with uniformly graded gravel as per I.S.4097 of 1967 ( revised up to date ) in the annular space between outer wall of casing pipe assembly and inner wall of bore hole including cost of gravel , transportation, stacking, washing and packing in layers ofsuitablethickness including all lead and lifts complete . | - | cum | - | - |
| - | Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity of Three Phase, 50 Hz, 415V, deep well submersible pump Steel body, suitable for 6"tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe andconnection cable
7.5 H.P. with 8to10stages,HeadMt.117-31
Discharge LPM 60-420 | - | each | 50,682 | - |
| - | Supplying and laying of submersible flat cable ISImarked 3 core copper wire of suitable size with proper clamping of approved make. 10.0 Sq.mm.multi strand | - | per metre | 405 | - |
| - | Supplying and laying of approved make stainless steel wire rope 6 mm thick complete with binding for support of pump and motor | - | per metre | - | - |
| - | Providing & Fixing of MCB -Three Pole - 63 Amp | - | job | - | - |
| - | Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) : 65 mm nominal bore | - | each | - | - |
| - | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.57 MB
Tendernotice_2.pdf
PDF • 2.02 MB
Tendernotice_3.pdf
PDF • 1.07 MB
BOQ_370595.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .