Estimate laying MS Main Riser pipes from RD 0 to Distribution Tank , Distribution Pipe Network vill. Bani incl. providing ,fixing air valve , scourvalve, NRV incl. comisioning, testing complete all respect for providing lift irri. rampur etc ropar

Amount

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,including the cost of diversion for traffic, night signals crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. B Mechanical Means (a) Depth upto 3m

Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.

Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts. ;125 mm o/d thickness 5.4 mm including epoxy coating Fe450

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

12.5 mm thick cement plaster 1:4

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical meansusing concrete mixer volumetric type

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge.

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete

Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete. C.I Double air valve (Size 65 mm)

Advance Direction sign board 1200x900mm rectangular per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. grade sheeting fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . (b)Using high intensity Microprismatic grade retroreflective Sheeting Type XI as per ASTM D 4956-09 and as per IRC 67 2012

Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts. (65 mm internal diameter 4.5 MM Thick)

Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint andcuttingof reinforcedcement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigidmanner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed.Thepipesshall rest on the beds at all joints through their length sand fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. RCC NP4 -700MM I/D PIPE

Extra for providing 1:2 cement sand mortar on tytone rubber joint of RCC pipes having sockets extendedout of barrel, in trenches including facing trowellingand finishing the jointsat the angle of 45 degree with faces of socket keeping joints wet tillcured, testing the pipejoints for leakproof and making good all leakage and defects as per specifications. j 700mm i/d

Supply and installation of alfa valve including fittings etc complete in all aspects of 90 mm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (100mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). B) Class PN-1.6 as per ISI 100 mm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (80mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). B) Class PN-1.6 as per ISI 80 mm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (125mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). B) Class PN-1.6 as per ISI 125 mm

Nuts & Bolts of all sizes and length required

Providing & Fixiing C.I indicating plates of size 100mm x 100 mm for SV/FH including synthetic enammel paint & letters in white enamel paint, fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including conrete block complete in all respect as directed by Engineer-in-charge

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 125 mm o/d pipe of 2.5 Kgf. / sqcm

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 110mm o/d pipe of 2.5 Kgf. / sqcm

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 90 mm o/d pipe of 2.5 Kgf. / sqcm

Providing,Laying, fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 75 mm o/d pipe of 4 Kgf. / sqcm

Providing,Laying, fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 63 mm o/d pipe of 4 Kgf. / sqcm

Supplying, fixing and jointing UPVC Equal Tee 125 mm 6kg/cm2

Supplying, fixing and jointing UPVC Equal Tee 110 mm 6kg/cm2

Supplying, fixing and jointing UPVC Equal Tee 90 mm 6kg/cm2

Supplying, fixing and jointing UPVC Equal Tee 75 mm 6kg/cm2

Supplying, fixing and jointing UPVC Equal Tee 63 mm 6kg/cm2

Supplying, fixing and jointing UPVC Reducer 110mm to 90mm 6kg/cm2

Supplying, fixing and jointing UPVC Reducer 90 mm to 75mm 6kg/cm2

Supplying, fixing and jointing UPVC Reducer 75mm to 63mm 6kg/cm2

Supplying, fixing and jointing UPVC 90 degree bend 110mm 6kg/cm2

Supplying, fixing and jointing UPVC 90 degree elbow 90mm 6kg/cm3

Supplying, fixing and jointing UPVC 90 degree elbow 75mm 6kg/cm4

Supplying, fixing and jointing UPVC 90 degree elbow 63mm 6kg/cm5

Supplying, fixing and jointing Cast Iron adapter 110 mm 6kg/cm2

Supplying, fixing and jointing Cast Iron adapter 75 mm 6kg/cm3

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.6 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. B Class PN-1.6 as per ISI with gun metal flap 125 mm i/d non return valve

Supplying and laying C.I. specials as per IS:1538 complete as desired by Engineer-in Charge conforming to ISI specifications. Note: If C.I specials of ISI Marked is used intead of specials confirming to ISI Specifications , than10%extraon rates of this item will be paid. a)C.I. SPECIALS UPTO 300 MM I/D

Dismantling concrete d)Cement concrete plain1:2:4 mix

Dismantling concrete b) Cement concrete plain 1:4:8 or 1:5:10

Filling cement bags with sand sewing and laying in position within 30 meters in dry including cost of E.C bags and strings.

Any Other Items

R S BUILDERS (BID ID -697939)