SPL REP TO LT DISTRIBUTION SYSTEM ELECTRIC WIRING AND FITTINGS IN CERTAIN SMQs AT 4 AFSB VARANASI UNDER GE (AF) GORKAHPUR

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and directed

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch complete all as specified and directed.

(d) One light point controlled by 2 Nos 2 way switch complete all as specified and directed.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed.

M&L Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L Modular switch 2 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

M&L for Modular Switch piano, flush type single pole, one way 16 Amp all as specified and directed..

M&L Modular Socket outlet Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer in charge.

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete complete all as specified and directed.

Supply and fixing lamp holder PVC body with back plate complete all as specified and directed.

M&L for Modular bell push 5 Amps 230 V, AC circuit complete all as specified and directed.

M&L for call bell ding dong 230 V AC circuit complete all as specified and directed by Engr-in-Charge.

Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed.

Suply and fixing in replacement engineering plastic with white acrylic cover LED Lamp ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 9/10 W .Make Havells/ Bajaj /Crompton.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing rechargeable LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement GI Pipe bend to shape 0.75 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall complete all as specified and directed.

Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surfaces complete all as specified and directed.

Supply and fixing factory made epoxy powder coated distribution board TPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asian Or eqvt make of Havells/Legrand

Supply and fixing factory made epoxy powder coated distribution board SPN 12 ways single door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asian Or eqvt make of Havells/Legrand

Taking down carefully unserviceable MCCB, MCB SP/SPN/Isolator of any rating/size complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB), TPN and current carrying capacity 40 to 100 Amps in the DB complete with connection testing and commissioning complete all as specified and directed

Supply and fixing MCB single pole 240 volt 'C' curve 10 KA 6 to 32 Amps capacity all as specified and directed incl taking down old one.

Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 to 63 Amps complete all as specified and directed .

Supply and Fix modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as specified and directed.

Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed.

Supply and fix in repairs exhaust fan made of Plastic body complete with blades, frames and louvres , 250 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing, including writing MES No and taking down the existing exhaust fan and depositing it to MES store complete all as specified and directed.

M&L for concealed sub main wiring using two single core FR PVC insulated, unseathed stranded copper conductor cable of size 4.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit).

M&L for concealed sub main wiring using two single core FR PVC insulated, unseathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit).

Taking down existing energy meter, noting down the last reading and depositing the same into MES store yard complete all as specified and directed.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including connecting up with incoming MCB with wire of suitable size complete all as specified and directed.

Supplying,installation,testing,commissioning of LT energy meter panel board 3 phase 4 wire system indoor type factory made wall mounting with suitable clamp or fasteners dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green colour, & providing with suitable size of aluminum stripfor earth connection all as specified for the following. (a) Incoming :-(i) MCCB 100 AMPS 4 pole 415 Vollts 25 KA -01 No.(ii) Digital type amp meter 0-200 Amp with CT's 03 Nos.(iii) Digital type voltmeter 0-500 Volts -01 No.(iv) Indicating lamps (RYB) 01 set of 3.(v) Copper bus bar rating 200 Amps 3 phase neutral-01 set (vi) Chamber for incoming & outgoing cable. (b) Outgoing :-(i) Energy Meter (KWh meter) digital type, temper proof, 10 to 60 Amps qty -4 (ii) MCB SPN 40 to 63 Amps 240 volts, 10 KA, "C" curve -8 No.

M&L in repairs earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with Galvanised earth strip 32x 6mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm 4 Core to 50 Sq mm 3.5 Core. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )

All as per item No. 41 above but size 120 Sqmm 3.5 core to 240 Sq mm 3.5 core complete all as secified and directed.

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 4 core.

All as per item No 43 above but size 35 sq mm 3.5 core complete all as secified and directed.

All as per item No 43 above but size 50 sq mm 3.5 core complete all as secified and directed.

All as per item No 43 above but size 120 Sqmm 3.5 core complete all as secified and directed.

All as per item No 43 above but size 150 Sqmm 3.5 core complete all as secified and directed.

All as per item No 43 above but size 240 Sqmm 3.5 core complete all as secified and directed.

Excavation in trenches n.exc. 1.5 m deep and n.exc.1.5 m wide in any type of soil and forming bottom surfaces for laying of cable complete all as specified and directed.

Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.

Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.

Returning filling in including spreading leveling watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removal surplus soil at a distance n. exc. 50 m and deposited where diredted at a lavel not exc. 1.50 m above the starting pont complete all as specified and directed.

M& Labour for boring, holes for inserting of 40/50/80 mm bore GI pipe under the road/hard standing or any other location not less than 1200 mm deep complete all as specified and directed.

M & L in repair GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L in repair GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L in repair GI pipe 80 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

Taking down existing old defective LT Panel / FP Box by disconnectiing its all elecetrical connections and by dismentelling foundation complete all as specified and directed at site by Engr-in-Charge.

Supply, install, connect & testing cubical outdoor type factory made double door , powder coated LT bus bar feeder pillar box having alluminium bus bar suitable for 200 amps 3 phase and neutral arrangement of size 500mm x 500mm x 200mm with MCCB 4 pole 100 A as incoming including provision of LED Indicating lamps (RYB) 01 set of 3. complete weather proof and vermin proof conforming to IP-54 made out of 3.15 mm thick CRCA sheet including provisions for ventilation and cable termination alley & two Nos suitable size of aluminum strip for body earthing all as per IS. It should be mounted on 40 x40 x 6mm angle frame with a clearance of at least 0.45 mtrs above GL and 0.30 mtrs below ground including required PCC for foundation complete all as specified and directed.

Supplying,installation,testing,commissioning of LT panel board 3 phase 4 wire system indoor type factory made free standing floor mounting with suitable clamp dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green fuly compartment with providing with suitable size of aluminum strip all as specified for the following. (a) Incoming :-(i) MCCB 400 AMPS 4 pole 415 Vollts 50 KA -01 No.(ii) Digital type Amp Meter 0-400 Amp with CT's 03 Nos.(iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3 .(v) Alluminium bus bar rating 600 Amps 3 phase neutral-01 set.(vi) Chamber for incoming & outgoing cable. (b) Outgoing :-(i) MCCB 200 AMPS 4 pole 415 Vollts 36 KA -03 No. (ii) MCCB 125 AMPS 4 pole 415 Vollts 36 KA -01 No. (iii) MCCB 100 AMPS 4 pole 415 Vollts 36 KA -01 No.

Supplying,installation,testing,commissioning of outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not less than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (a) Incomming :-(i) MCCB 250 AMPS 4 pole 415 Vollts 36 KA -01 No. (ii) Digital type amp meter 0-400 Amp with CT's 03 Nos. (iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3. (v) Aluminium bus bar rating 400 Amps 3 phase neutral-01 set (vi) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 125 AMPS 25 KA 415 Volts 4 pole -02 No (ii) MCCB 63 AMPS 16 KA 415 Volts 4 pole -02 No.

Supplying,installation,testing,commissioning of outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not less than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (a) Incomming :-(i) MCCB 125 AMPS 4 pole 415 Vollts 36 KA -01 No. (ii) Digital type amp meter 0-200 Amp with CT's 03 Nos. (iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3. (v) Aluminium bus bar rating 200 Amps 3 phase neutral-01 set (vi) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 100 AMPS 25 KA 415 Volts 4 pole -1 No.(ii) MCCB 63 AMPS 16 KA 415 Volts 4 pole -02 No.

M/S DEEKSHA CONSTRUCTION (BID ID -3129005)

M/s A.K Construction (BID ID -3128985)

M/S UJJAWAL ENTERPRISES (BID ID -3136903)

Shiva Builders (BID ID -3128975)