REPAIR / MAINTENANCE OF OLD UNSERVICEABLE WIRING OF CERTAIN SMQ / OMQ / OTM ACCN AND CONNECTED ITEMS AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT - 10

Amount

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M&L for point wiring for following with single core PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia, concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, Junction boxes and modular metal flush boxes alongwith outer cover plate for mounting modular switch, socket and electronic regulator and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm FRLS (Nominal area), complete all as specified. Note :- i) Cost for Modular metal flush boxes and modular cover plate shall deemed to be included in the item rate. ii) Cost for cutting, chasing and making good the disturbed surfaces shall deemed to be included in the quoted rate. (a) One light point controlled by one switch one way. Make : Havells/L&T/grandlay/gloster

(b) One fan/exhaust fan point controlled by one switch. Make : Havells/L&T/grandlay/gloster

(c) One socket outlet 3pin 5 Amp controlled by one switch on independent board. Make : Havells/L&T/grandlay/gloster

(d) One 3 pin 5Amps socket out let point on the same board controlled by one switch complete. Make : Havells/L&T/grandlay/gloster

(e) One bell point controlled by one bell push 5 Amps. Make : Havells/L&T/grandlay/gloster

(f) One light point controlled by two 2 - way switches. Make : Havells/L&T/grandlay/gloster

Description all as per Srl item No 3 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed. Make : Havells/L&T/grandlay/gloster

S&F of modular switch colourful white/black/golden etc 1 way 6 Amps one module complete all as specified and directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of modular socket 6 Amps 2/3 Pin combined 02 module complete, all as specified and directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of modular switch one way 16 Amps, one module complete, all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of electric bell, multi music type, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge.

S&F of modular bell push 6 Amps one module complete all as specified and as directed by Engr-in-Charge. Add Make : Anchor/Legrand/Havells

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F switch piano flush type 5 Amps, single pole one way complete all as specified and directed by Engr-in-Charge. Add Make : Anchor/Legrand/Havells

S&F of switch piano flush type 5 Amps, single pole two way complete all as specified and directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of socket out let 3 pin 6 Amps, flush type complete, all as specified and directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of switch piano flush type single pole one way 15 Amps complete, all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F of wireless door bell, battery operated 100 feet range, IP44 Waterproof & Weatherproof complete with batteries, all as specified and as directed by Engr-in-Charge.

S&F of wireless door bell, electrically operated 100 feet range, IP44 Waterproof & Weatherproof complete with batteries, all as specified and as directed by Engr-in-Charge.

S&F of flush type bell push, 5 Amps complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

Supply and fixing for stepped type fan regulator 120 watt, 230 volts, 50 HZ, AC Supply complete all as specified and as directed by Engr-in-Charge.Make : Anchor/Cona/Rider. Add Make : Anchor/Legrand/Havells

Supply and fixing for stepped type modular fan regulator 100 watt 01 module, 230 volts, 50 HZ, AC Supply complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

Supply and fixing for stepped type modular fan regulator 100 watt 02 module, 230 volts, 50 HZ, AC Supply complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Legrand/Havells

S&F LED Bulb B22 /E27 base 12 W 230V 50Hz any colour complete all as specified and as directed.

S&F Modular colourful white/Golden/Cream/Wooden etc type cover plate with frame, 1 module complete all as specified and directed by Engr-in-Charge.

S&F Modular colourful white/Golden/Cream/Wooden etc type cover plate with frame 2 module complete all as specified and directed by Engr-in-Charge.

S&F Modula rcolourful white/Golden/Cream/Wooden etc type cover plate with frame, 3 module, complete all as specified and directed by Engr-in-Charge.

S&F Modular colourful white/Golden/Cream/Wooden etc type cover plate with frame, 4 module, complete all as specified and directed by Engr-in-Charge.

S&F Modular colourful white/Golden/Cream/Wooden etc type cover plate with frame, 6 module, complete all as specified and directed by Engr-in-Charge.

S&F Modular colourful white/Golden/Cream/Wooden etc type cover plate with frame, 8 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular PVC flush box, but 1/2, 3 module complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular PVC flush box, but 4 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular PVC flush box, but 6 & 8 module, complete all as specified and directed by Engr-in-Charge.

S&F surface mounting LED round surface down lighter 12 Watt with high effeicient LEDs & glare free opal diffuser with driver internally pre wired etc complete all as specified and directed. Make : Syska/Havells/CG

S&F of Indoor decorative LED battens- integrated type 20 watt 4 feet white/warm white fixture complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make - C&S/ Philips/Havells.

S&F of Indoor decorative LED battens- integrated type 10 watt 2 feet white/warm white fixture complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make - C&S/ Philips/Havells.

S&F for Bulk head LED fitting 10 watt with PDC aluminium housing and milky diffuser complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make: Halonix Cat Pt No HLBH-02-10-CW or equivalent in Wipro/Philips/Havels/ Syska.

S&F decorative LED wall bracket light fitting made up of Polycarbonate suitable for B-22 base including one No 12 watt LED bulb, complete all as specified and directed. Make- Halonix / C&S/Philips.

S&F of wall mounting type decorative fitting, made up of Polycarbonate including 9 W LED lamp B22 base complete with connection with and including copper conductor cable of suitable size including taking down the existing unserviceable fitting complete all as specified and directed by Engr-in-Charge. Add Make : Syska/Havells/CG

S&F of LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2'x2' size complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size .all as specified and directed by Engr-in-Charge. Make:- Halonix /Phillips/Havells

S&F in replacement of LED lamp E 27 base 4.9 W 3000 K complete all as specified and directed by Engr-in-Charge. Make:- Halonix/Phillips/Havells

S&F in replacement of LED lamp E 22 base 6 W 3000 K complete all as specified and as directed by Engr-in-Charge. Make:- Halonix/Phillips/Havells

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 4 way double door, 200 Amps, rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make: Havells/CG/Standard/Leagrand. Make : Legrand/Havells/Standard

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way, double door, 415 Volts 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 way double door AC, 3 Phase, 415 Volts, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing in replacement of sheet metal enclosure for distribution board TPN (when MCBs to be used ) 6 way double door AC, 3 Phase, 415 Volts, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing in replacement of vertical type load line distribution board, double door , 12 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing in replacement of vertical type load line distribution board, double door , 8 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing in replacement of for vertical type load line distribution board, double door , 4 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of TPN/ TP and current carrying capacity 40 to 100 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge. Add Make : Legrand/Havels/Standard

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of TPN/ TP and current carrying capacity 16 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge. Add Make : Legrand/Havels/Standard

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 AMP in the MCB DB complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP in the MCB DB complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing in replaccement of metel clad socket outlet 3 pin, two phase one neutral , 20A suitable for metal clad AC box complete all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing MCB Protected Socket PVC Plastic Base Model (White), 4 module , 20 A suitable for AC box along with 3 pin top complete all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/Standard

Supply and fixing in repalcement of metel clad plug top 3 pin, two phase one neutal 20A suitable for metal clad AC box complete all as specified and as directed. Make : Legrand/Havells/Standard

Supply and fixing in replacement of MCCB, 3 pole 100 A, 16kA, 415Volts complete all as specified and as directed by Engineer-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 4 pole 100A, 16kA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 3 pole 160A, 36KA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 3 pole 250A, 36kA, 415 Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 4 pole 160A, 36kA, 415 Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 4 pole 200A, 36kA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 4 pole 250A, 36kA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 4 pole 350A, 36kA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 4 pole 400A, 36kA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

S&F of MCCB, 4 pole 500A, 36kA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge. Make : Legrand, C&S, Havells

Supply only in replacement PVC 3 core copper conductor flexible cable of size 2.5 Sqmm for connection etc complete all as specified and directed by Engr-in-Charge. Make : Kalinga/Havells/Grandlay

Supply only in replacement PVC 3 core copper conductor flexible cable of size 1.5 Sqmm for connection etc complete all as specified and directed by Engr-in-Charge. Make : Kalinga/Havells/Grandlay

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 4 sqmm complete all as specified and directed by Engr-in-Charge. Make : Kalinga/Havells/Grandlay

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm complete all as specified and directed by Engr-in-Charge. Make : Kalinga/Havells/Grandlay

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm complete all as specified and directed by Engr-in-Charge. Make : Kalinga/Havells/Grandlay

Supply and fixing in replacement of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed by Engr-In-Charge. Make : ABB/Legrand/Havells

Supply and fixing in replacement of globe Garden light of any type and colour with 4 feet long PVC pipe 40mm dia including PCC block for fixing of GI pipe complete with all accessories internally pre wired and including connecting up two core copper conductor cable complete all as specified and directed by Engr-in-Charge.

M&L in replacement rigid non metalic PVC conduit (medium grade) ISI marked 25 mm dia inclusive of tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as coupler, lock, nuts, saddles, pipe hook etc for replace damage existing sub main wiring conduit complete, all as specified and directed by Engineer-in-Charge.

M&L in replacement rigid non metalic PVC conduit (medium grade) ISI marked 20 mm dia inclusive of tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as coupler lock nuts saddles, pipe hook etc for replace damage existing sub main wiring conduit complete, all as specified and directed by Engineer-in-Charge.

M&L in replacement rigid non metalic PVC conduit (medium grade) ISI marked 32 mm dia inclusive of tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as coupler lock nuts saddles, pipe hook etc for replace damage existing sub main wiring conduit complete, all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of LED bldg security light / SL 60 watt IP 66 with internally prewired incl electronic driver and connecting up with three core flexible copper condutor 1.5 sqmm cable complete all as specified and directed. Add Make : Philips/Crompton Greaves/Bajaj

Supply and fix of LED bldg security light / SL 90 watt IP 66 with internally prewired incl electronic driver and connecting up with three core flexible copper condutor 1.5 sqmm cable complete all as specified and directed. Add Make : Philips/Crompton Greaves/Bajaj

M&L of GI pipe light grade 32 mm dia bracket not less than 1.5 Mtr long and bent to a shape for fixing of street lights incl 2 Nos MS clamps made out out of 25x6 mm MS flat incl 04 Nos fully threaded bolts and nuts fixing on wall etc complete all as spd and directed by Engr-in-Charge .

Supply and fixing in replacement Decorative wall light/ wall lamp comet indoor wall lamp grey/wite colour sconce for living room & bedroom B22 base complete all as specified and directed by Engr-in-Charge. Make:- phillips or equivalent as per list of make. Add Make : Philips/Crompton Greaves/Bajaj

Supply and fixing in replacement LED bedside wall light surface mounted spotlight reading light night lamp long arm 28cm goose neck warm white antique brass finish complete all as specified and directed by Engr-in-Charge. Add Make : Philips/Crompton Greaves/Bajaj

Supply and fixing in replacement Gangbox 15 Amp flush type ( 01 switch + 01 socket) complete all as specified and directed by Engr-in-Charge. Add Make : Anchor/Havells/C&S

Supply and fixing in replacement Gangbox 5 Amp flush type ( 02 switch + 01 socket) complete all as specified and directed by Engr-in-Charge. Add Make : Anchor/Havells/C&S

Supply and fixing in replacement combined box 16 Amp 6 pin 3 module complete all as specified and directed by Engr-in-Charge. Add Make : Anchor/Havells/C&S

Supply and fixing in replacement combined box 16 Amp 6 pin flush type complete all as specified and directed by Engr-in-Charge. Add Make : Anchor/Havells/C&S

Supply and fixing in replacement combined box 6 Amp 3 pin flush type complete all as specified and directed by Engr-in-Charge. Add Make : Anchor/Havells/C&S

Supply and fixing in LED rope Light round type colour warm white/green/pink /pink including connector flexishine plug n play flexibloe rope light for indoor and outdoor decorations complete all as specified and directed by Engr-in-Charge. Add Make : Philips/Havells/Crompton Greaves

Supply and fixing in LED strip Light colour warm white/green/pink /pink including connector flexishine plug n play flexible rope light for indoor and outdoor decorations complete all as specified and directed by Engr-in-Charge. Add Make : Philips/Havells/Crompton Greaves

Supply and fixing in Starlit 12 Meter 72 LEDs String Light for Decoration / Decorative LED String Light Warm White/Cool White, Red, Green, Blue, Pink, and Amber, Pack of 1, Polycarbonate complete all as specified and directed by Engr-in-Charge. Add Make : Philips/Havells/Crompton Greaves

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge. Make : Bajaj, Philips, Crompton & Havells

Supply and fixing in repair ceiling recessed mounting LED luminaire SKY Lights luminare,Printed Customised design (design as per approval by GE) 600 mm x 600 mm, 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lightning .The Leds used should have a color consistency SDCM ≤ 5,CRI ≥ 80 and CCT 6500 K, ≥ 110 lumen/watt,50,000 burning hrs ,PF≥0.95,surge protection 3.5 KV .The LED Luminaire & its driver both should be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Eng-in-charge.Make : Bajaj, Philips, Crompton & Havells

S&F LED sleeky bldg security light (Lens) fitting of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with two nos of bolts of suitable size, duly painted with two coats of synthetic enameled paint and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed. Make : Bajaj, Philips & Havells

S & F in repair LED Driver for LED Bldg security light upto 90 W including all conection and suitable size of copper wire complete all specifed and directed.

Supply & fixing in repair Decorative gate moon light including 1 N x 20 W LED Lamp made up of high grade unbreakable polycarbonate material suitable for mounting Pole Dia - 50 mm (max) OD. Dimension: Width: 200 mm & Height: 227 mm for Moon 200 decorative gate light all as specified and directed. Note :- Rate of Fixing of GI Pipe for mounting of Gate light & PCC Work shall be deemed to be included in the unit quoted rate of this item.

Supply and fix in replacement of new generation, post top lamp 20 watt IP65, energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution spn aluminium lands cape luminaire with high power LEDs as light souce and connecting up with three core flexible copper conductor 1.5 sqmm cable with 40 mm dia GI pipe including PCC work complete all as specified and directed. Make:- Havells Cat part No. RUBYPT25WLED757PSYMTOPC, or equivalent in Wipro/Philips/ Bajaj

S&F in repair bakelite sheet hylam 3mm thick with white top fixed with cup washers with machine screws on existing switch board with including removing existing switch/ switch sockets/ bell push etc and refixing the same by making slots on new sheet complete all as specified & directed for MS box fo approx size 8" x 5" etc complete all as specified and directed by Engr-in-Charge.

Description all as per ser item No 104.00 above but of size 11'' x 9" complete all as specified and directed by Engr-in-Charge.

S&F 20W, 6500K, 4 feet LED Inverter tube light fitting, with Back-Up of 4 hours, Auto Cut-off after Full charge, VSP of 3.5 kV energy efficient, 240 volts, fixed on wall/ ceiling etc complete all as specified and directed by Engr-in-Charge. Add Make : Bajaj/Philips/Syska

Supply, installation,testing and commissioning of LED Strip light tri Colour with IP66 18 mtrs long flexible, PU coated fixture with suitable for continous mounting arrangement clips & end caps. Minimum lumens output of 800 lm/mtr and minimum power of 10 W/mtr along with suitable driver in metal enclosure with IP66 Protection complete all as specified and directed by Engr-in-Charge. Add Make : Bajaj/Philips/Syska/Havells

Supply and errect pole 3.5 mtr long, alongwith double armed Pole tube made out MS pipe, base & embellishment casted, with PU coating of approved colour along suitable for pendant light upto 45 w as per direction.The pole shall be mounted on RCC pedestal as per design and drawing prepared by the manufacturer all as specified and as directed by Engineer-in-charge with following specifications:- (a)Top dia 76mm (b) Casted dia 114 mm (c) Cement concrete 1:2:4 type B1 for foundations up of size 1' x 1' x1' PCC from ground level with proper fixing arrangements such as nut/bolts/washers over PCC work all as specified and directed. Make-Halonix Cat No. HLOP-S95-3.5M-114/76-ACB or same type/equivalent in surya/Baja/Crompton/Phillips including necessary jointing material on lugs,glands etc as required at site(The cable is to be laid for one pole to another pole at a distance of 10-15 mtr each)

Supply and fixing of energy efficient 45 W LED IP65 pendant mounting street light aluminium die cast with clear acrylic front cover suitable for high efficient assymetric secondary lens LM80 certified for higher power 240v,lumen 100 lm/w and driver efficiency 85% with all accessories internally prewired and including connecting up with twin core copper conductor cable complete all as specified and directed. Make- HALONIX Cat No. HLOSL-04-45-WWL-01 or same type /equivalent in surya/Baja/Cromptons/Philips

Supply and errect pole 3.5 mtr long, alongwith single armed Pole tube made out MS pipe, base & embellishment casted,with PU coating of approved colour along suitable for pendant light upto 45 w as per direction.The pole shall be mounted on RCC pedestal as per design and drawing prepared by the manufacturer all as specified and as directed by Engineer-in-charge with following specifications:- (a)Top dia 76mm (b) Casted dia 114 mm (c) Cement concrete 1:2:4 type B1 for foundations up of size 1' x 1' x1' PCC from ground level with proper fixing arrangements such as nut/bolts/washers over PCC work all as specified and directed. Make-Halonix Cat No. HLOP-S95-3.5M-114/76-ACB or same type/equivalent in surya/Baja/Crompton/Phillips including necessary jointing material on lugs, glands etc as required at site(The cable is to be laid for one pole to another pole at a distance of 10-15 mtr each)

S& F Premium category of LED Spike Light 10 w suitable for outdoor environment with IP65 including necessary jointing material on lugs, glands etc as required at site complete all as specified and as directed. Make-Havells cat no LHEVACPBPN6K010 or same type /equivalent in surya/Baja/Crompton/Phillips

S&F round wall washer crafted from aluminium Die Cast with four-directional beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected including necessary jointing material on lugs,glands etc as required at site. Make:-Havells cat no LHEVAEPBPN6K007 or same type /equivalent in surya/Baja/Crompton/Phillips

S&F floor surface spotlight decorative surface mounted fixture with compact design available in different finish and colors to match with ceiling requirements.Ceiling cutout Ø 56 mm, height 66 mm for 7 W including necessary jointing material on lugs, glands etc as required at site. Make-Havells cat no LHEEAKPBIE1T007 or same type /equivalent in surya/Baja/Crompton/Phillips

S&F streek tracklight 7 W 3000 K black surface spotlight with aluminum structure, available with adjustable light engine to achieve the desired illumination angle including necessary jointing material on lugs,glands etc as required at site. Make-Havells cat no LHEEANPBPH1K007 or same type /equivalent in surya/Baja/Crompton/Phillips

S&F LED tube light 20 Watt | waterproof LED tube light can be installed as outdoor wall lights for outdoor home, compound wall lights or waterproof tube lights for home (Cool White, 20W) complete all as specified and as directed. Add Make : Bajaj/Philips/Syska

S&F PVC tape fire retardent insulation electrical 15 mtr tape roll of colour black/blue/green/yellow/white complete all as specified and as directed.

S&F resistant cable 2 Core electrical cable, transparent flat/round electrical cable, clear tinned copper wire, home bedroom bar lighting lamp cable outdoor wire complete all as specified and as directed. ( Size : 5 Meter , Color : Flat 2x0.75 (18 awg)

Taking down of geyser storage type cap 25/50 litre, any make or type incl disconnecting electrical & water supply connection, dismantling, stripping up for inspection for repair, cleaning, replacement of UNSV parts, re-assembling & refixing in position complete all as specified and as directed. Note :- The replacement of UNSV parts shall be measured & paid for separately as Supply only under relevant items.

S&F steel tank with assembly 6/9 holes as per existing including element & thermostat suitable for 25 Litres geyser complete all as specified and as directed.

Description all as per ser item No 119.00 here in before but for capacity 50 Litres complete all as specified and as directed.

S&F outer body made out of 18 gauge MS sheet for geyser capacity 25 litres size and shape as per sample produce, duly painted with white enamelled paint complete all as specified and as directed.

Description all as per ser item No 121.00 here in before but for capacity 50 litres complete all as specified and as directed.

S&F LED indicator lamp red & green as per existing shape and size ,230V etc complete all as specified and as directed.

S&F inlet pressure reducer valve/NRV Assembly of size 15mm suitable to fix in inlet of geyser of any size and shape complete all as specified and as directed.

S&F bottom cover(Half round plate) duly powder coated and matching colour of existing geyser of any make for 25/50 litres capacity incl screws and connection of indicator etc complete all as specified and as directed.

Description all as per ser Item No 125.00 here in before but capacity 50 Litres complete all as specified and as directed.

S&F dead nut of suitable size ( as per sample produce) for fixing on 25/50 Litres geysers of any make and size complete all as per specified and as directed.

S&F reinforced PVC connection heavy duty pipe 15mm bore and 45cm long with brass nuts at both ends etc complete all as specified and directed.

Supply & fixing reinforced PVC connection heavy duty pipe 15mm bore and 60cm long with brass nuts at both ends etc complete all as specified and directed.

Supply & fixing chromium plated hexagonal nipple of 15mm dia of required length as per site requirement for connecting the PVC connection and replacement chromium plated stop cock to the geyser complete all as specified and as directed.

Supply & fixing glass wool for geyser for inner side of outer & inner tank for insulation complete all as specified and as directed.

S&F socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and as directed. Add Make : Anchor/Havells/C&S

S&F 3 pin top of 16 Amp capacity, 240V only for replacement of burnt /unserviceable top for geyser complete all as specified and as directed. Add Make : Anchor/Havells/C&S

S&F glass lined in canopy heating element/ ceramic heating element 2000 Watt capacity of copper material including gasket for geysers ( in round shape) or as per sample suitable for 25/50 Litres capacity geysers complete all as specified and as directed. Make:-Theeta/ Venus/ Racold/ Pioneer or Equivalent

S&F Capillary thermal cutout /Relay ISI marked, Electronic type 250 V,15 Amps , 50-60 Hz with thimles Suitable for 25/50 Litres capacity geysers complete all as specified and as directed.

S&F Capillary Thermostat ISI marked, 250 V,15-20 Amps , 50-60 Hz with thimles Suitable for for 25/50 Litres capacity geysers complete all as specified and as directed.

Taking down defective Ceiling fans/ Exhaust fans/ Cabin fans/ Air circulator fans from ceiling/ wall height upto 3 mtrs to 5 mtrs, dismantling blades and transporting to work shop/ store, stripping up the fans of any make/ size, checking , testing, over hauling , greasing , including taking out u/s spare parts and replacing with new parts, reassembling including fixing of blades, replacement of blade screws, split pins (where required) and testing for its satisfactory running, hanging the fans in position complete all as specified and directed. Note : (i) Replacement of unserviceable spare parts such as ball bearing, bushe, capacitor, fan blade, canopy and shaft shall be measured and paid separately as supply only under relevant item of Sch 'A' . (ii) The cost cleaning, greasing & refixing in position upto height 3mtrs to 5 mtrs is deemed to be inclusive in the unit rate quoted by the contractor. (a) Ceiling fan of size 1200mm sweep

(b) Ceiling fan of size 1400 sweep

(c) Cabin fan/ Bracket fan/ wall mounted fan size 16" sweep

(d) Air Fresh fan/ Exhaust PVC of size 200mm/ 230mm sweep

(e) Exhaust fan of size 250/300 mm sweep (Steel body/PVC)

(f) Exhaust fan of size 380 mm sweep

(g) Exhaust fan of size 450 mm sweep

(h) Air circulator/ Pedastal fan of size 25" sweep.

S&F in replacement of ceiling fan 1200mm sweep, BEE 5 star, BLDC type single phase 230 volts, 50 Hz, AC 03 blades, down rod 300mm, nut, bolt & clamp complete, all as specified and as directed Make: Orient Model No. Hector 500 48” 5 star/ I Falcon 5 star or equivalent model in Havells/Polycab or Usha

Taking out the old burnt out winding from the fan, rewinding with super enameled superior quality copper conductor winding with similar gauge & size as per original including sleeves, varnishing etc complete all as specified and as directed.(a) cabin fans/bracket fans/wall mounted fans size 16” sweep

(b) Air fresh fan/exhaust PVC of size 200/230mm sweep

(c) Exhaust fan of size 250/300mm sweep (steel body/PVC)

(d) Exhaust fan of size 380mm sweep

(e) Exhaust fan of size 450mm sweep

(f) Air circulator fan/pedestal fan of size 25” sweep

Supply only Ball bearing No.6201/ 6202 suitable for Ceiling fan/ Exhaust fan/ cabin fan/ Air circulator complete all as speified and as directed.

Supply only Bush suitable for any type of ceiling fans, exhaust fan, cabin & Air circulator including mechanical lathe work etc complete all as specified and directed.

Supply only shaft suitable for any type of ceiling fan, exhaust fan, cabin & Air circulator including mechanical lathe work etc complete all as specified and directed.

Supply only Fan capacitor of 2.5 MFD, capacity ISI marked madeup of plastic with copper terminal wire incl MS/PVC clamp of required size complete all as specified and directed.

Supply only Fan capacitor of 3.15 MFD, capacity ISI marked madeup of plastic with copper terminal wire incl MS/PVC clamp of required size complete all as specified and directed.

Supply only Fan Motor run capacitor of 4.0 MFD, capacity ISI marked madeup of plastic with terminal lugs incl MS/PVC clamp of required size complete all as specified and directed.

Supply only Fan blades of colour as per existing fan with suitable screw for 1200mm sweep ceiling fan complete all as specified and as directed.

Supply only Fan blades of colour as per existing fan with suitable screw for 1400mm sweep ceiling fan complete all as specified and as directed.

Supply only plastic canopy (set of 02) with screw suitable for 1200/1400mm sweep complete all as specified and directed.

Supply only exhaust fan motor 0.12 HP, suitable for upto 300mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B42, double bearing, trusted copper winding, high speed complete all as specified and directed. Make : Havells/CG/Almonard

Supply only exhaust fan motor 0.16 HP, suitable for 380mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B42, double bearing, trusted copper winding, high speed complete all as specified and directed. Make : Havells/CG/Almonard

Supply only exhaust fan motor 0.25 HP, suitable for 450mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B48, double bearing, trusted copper winding, high speed complete all as specified and as directed. Make : Havells/CG/Almonard

S&F three core FR PVC insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow /Green is for earthing of size 23/0.0076 three core complete all as specified and as directed.

S&F in replacement of down rod 30cm long including cutting holes etc suitable for ceiling fan including hanging clamp of required size with rubber reel, nuts, bolts including spring washers and locking of splite pin of suitable size for 1200/1400 sweep ceiling fan complete all as specified and directed.

S&F in replacement of down rod 60cm long including cutting holes etc suitable for ceiling fan hanging clamp of required size with rubber reel, nuts, bolts including spring washers and locking of splite pin of suitable size for 1200/1400 sweep ceiling fanhanging clamp of required size with rubber reel nuts, bolts including spring washers and locking of splite pin of suitable size for 1200/1400 sweep ceiling fan complete.

S&F in replacement of down rod 90cm long including cutting holes etc suitable for ceiling fan hanging clamp of required size with rubber reel, nuts, bolts including spring, washers and locking of split pin of suitable size for 1200/1400 sweep ceiling fan complete all as specified and as directed.

S&F in replacement of down rod 1.2mtr long including cutting holes etc suitable for ceiling fan hanging clamp of required size with rubber reel, nuts, bolts including spring, washers and locking of split pin of suitable size for 1200/1400 sweep ceiling fan complete all as specified and as directed.

Supply & fixing in repair 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed. Make : : Havells/L&T/grandlay/gloster

Supply & fixing in repair 2.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed. Make : : Havells/L&T/grandlay/gloster

Supply & fixing in repair 4 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed. Make : : Havells/L&T/grandlay/gloster

Supply & fixing in repair 6 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed. Make : : Havells/L&T/grandlay/gloster

Supply & fixing in repair 10 sqmm (nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified and as directed. Make : : Havells/L&T/grandlay/gloster

S&F in repair PVC casing/caping with accessories of size 20mm complete all as specified and directed. Note:- Nickel cadmium screws shall be used for fixing of casing/ caping.

S&F in repair PVC casing/caping with accessories of size 25mm complete all as specified and directed. Note:- Nickel cadmium screws should be used for fixing of casing /caping.

S&F in repair PVC casing/caping for AC pipe with accessories of suitable size complete all as specified and as directed. Note:- Nickel cadmium screws shall be used for fixing of casing/ caping.

S&F in repair PVC wall cable management covers, paintable flat design cover conceals 11.8 inch wall raceway wall mount TV cable concealer cord cover raceway kit to hode cables, cords or wires with accessories of suitable size complete all as specified and directed. Note:- Nickel cadmium screws shall be used for fixing of casing/ caping complete all as specified and directed.

S&F PVC ventilation fan, with louvers shutter of sweep size 230/250mm, single phase, embedded in the Wall/Window including provision of PVC flexible copper cable from ceiling rose to exhaust fan giving connection complete all as specified along with mosquito jali on Wall/Window complete all as specified and directed. Add Make : CG/Baja/Havells

Supply and fixing Air circulator wall mounted fans 230 volts single phase osciallating of size 400 mm sweep, 60 Watt Hi speed fan, plastic body & blades, pull cords for speed regulation & oscillation, mounting with bolts, nuts and including provision of PVC flexible copper conductor cable of size 23/0.0076 three core from ceiling rose to air circulator fan complete all as specified and as direted. Make of fan Orient or equivalent in Crompton/Bajaj/Khaitan/Havells as approved by GE.

S&F exhaust fan,steel body heavy duty with louvers complete of sweep size 300mm, 900 RPM,Copper winding single phase motor, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified along with mosquito jali on wall complete. Make:- Orient or equivalent in Crompton/Bajaj/Khaitan/Havells as approved by GE.

Material and labour for earthing complete with galvanized steel plate elecrode of size 60cm x 60cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, connected with and including GI strip 32mm x 6mm with & including GI pipe 50mm bore medium grade as protection pipe (upto the body of equipment max 7.50 meter) by means of GI and thimbles, earth plate surrounded packed layers of coal dust and common salt 15cm thick, all around top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh complete all as shown in Electrical plate No. 3 of SSR Part-I (2009), testing on completion including PCC chamber (1:3:6) using 20mm graded stone aggregate and RCC M-25 cover and angle iron frame complete all as specified. Note :- (i) The cost of GI strip/ wire from top of earth plate upto 7.50 meter above GL with GI protection pipe shall be deemed to be included in unit rate. (ii) PCC pit shall be provided at least 0.50 meters away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction elbow etc. shall be deemed to be included in the unit rate. (iii) In case the testing result of earthing work not found satisfactory, the contractor shall have to carry out earthwork at new location and nothing extra shall be admissible on this account. (iv) The earthing work shall be carried out in presence of MES representative detained by Engr-in-Charge.

Supply, installation and testing of maintenance free, ready capsule, pipe-in-case, special chemical type earthing system for distribution network. The technical specification is designed keeping in view following advantages :- (i) In this type of earthing electrode, the electrode, the surrounding enhancing material bonding with electrode and the case are in pre-fabricated, ready to use form so that on-filed mal-practice in form of less digging of earth pit, less earth enhancement filling, improper watering at site, can be overcome. This makes the quality check very convenient. (ii) Due to pre-fabricated, ready to use methodology, no on-field wastage of earth enhancement material is done. (iii) This earthing system shall be the relevant standard specification unless otherwise specified, in line with the requirement of any of the latest applicable standard. The applicable amendments as and when imposed shall be appicable. This maintenance free earthing system shall be based on ready capsule type, pipe-in-case technology concept in which, One Galvaniszed hollow pipe (Electrode) is kept inside the Galvanized Perforated cage. The space between the electrode and cage shall be filled with a specially developed earth enhancement material (EEM) made up of conductive cement, graphite carbon powder, Sodium montmorillonite/ Sodium Bentonite, Hydrous aluminium silicate etc. to reduce earth resistivity. The system shall be almost maintenance free and require no periodic or scheduled maintenance for an expected period of 15 years. There shall be no requirement to add any other chemical or water at any time after initial installtion because of hygroscopic chracteristic of earth enhancement operations in the actual service conditions at site.

S&F mild steel galvanised pipe, light grade, 40mm nominal bore for passing of GI earth continuty conductor strip, fixed to walls, laid under floor/ road crossings, complete with and including clamps socket & elbow complete all as specified and directed.

M&L for test point terminal block made of gun metal or phosphorus bronze size (75x75x25)mm drilled and screwed including 3 nos, 8 mm dia 25 mm long hexagonal head screw complete all as specified and directed.

M&L copper strip (20 x 3.15)mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Supply and installation of 40 W Led Tri Colour decorative pole as per Lustre item No. Li-8433A-40(LIPTF-40). The Luminaire shall be made out of cast aluminium and mild steel tube. The dimensions of the decorative pole are 100 mm dia and 2500mm height. A translucent PMMA diffuser shall fitted in the luminaire. A built in service window is provided to accommodate a 6 amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole. LED shall be mounted on the PCB and fitted in the Luminaire. PCB shall be fitted on the suitable Heat Shrink for proper heat dissipiation. Suitable constant current LED driver with power factor 0.95 or more and efficiency 85% or more shall also be fitted inside the luminaire. The surface of the luminaire shall be machined and polished properly to give it a smooth surface. The luminaire shall be duly pretreated and coated in UV ray resistant polyurethane/Polyester in approved colour shade. A two way connector shall be provided in the luminaire for the main connections. Decorative pole shall be installed at desired location including foundation of the same by making cement concrete foundation of PCC (1:2:4) type B2 (using 40mm graded stone aggragates) with the help of anchor bolts and GI sleeve as required complete all as specified and directed. Make:- Lustre or equivalent.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

H.B. Traders (BID ID -3437295)

S.R. Constructions (BID ID -3434104)

M/s Prakash Enterprises (BID ID -3443669)

M/S Anand Enterprises (BID ID -3444153)