Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹43.9 L+₹1.2 L (2.84%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹44.2 L+₹1.5 L (3.56%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹44.3 L+₹1.7 L (3.95%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹44.8 L+₹2.2 L (5.10%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest bid |
| Sl No | Description | Qty | Unit | M/s Sajad Hussain Wani L1 | patriotic builders L9 | M/S BEE AAY CONSTRUCTIONS L10 | M/S IQ ENTERPRISES L8 | Concept Engineering & Constructions L5 | M/S MANZOORAHMAD LONE L3 | M/S MIR BUILDERS L6 | m/s mohd saleem and co L7 | M/S MUNEER AHMAD WANI CONSTRUCTIONS L2 | AAKASH CONTRACTORS L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. | 260 | Sqm | 35 ₹9,100 | 50 ₹13,000 | 50 ₹13,000 | 120 ₹31,200 | 80 ₹20,800 | 20 ₹5,200 | 10 ₹2,600 Lowest | 10 ₹2,600 Lowest | 30 ₹7,800 | 80 ₹20,800 |
| 2.00 | Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out any type of soil complete all as specified and directed. | 103.2 | Cum | 225 ₹23,220 | 200 ₹20,640 | 200 ₹20,640 | 260 ₹26,832 | 250 ₹25,800 | 182 ₹18,782.4 | 120 ₹12,384 Lowest | 200 ₹20,640 | 180 ₹18,576 | 260 ₹26,832 |
| 3.00 | Removing excavated material exc. 250mtr but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. | 35 | Cum | 190 ₹6,650 | 100 ₹3,500 | 100 ₹3,500 | 120 ₹4,200 | 200 ₹7,000 | 25 ₹875 Lowest | 25 ₹875 Lowest | 50 ₹1,750 | 50 ₹1,750 | 90 ₹3,150 |
| 4.00 | Returning filling in including spreading levelling watering & well Ramming in layers n. exc 25 cm thick complete all as specified and directed. | 45.53 | Cum | 150 ₹6,829.5 | 100 ₹4,553 | 100 ₹4,553 | 60 ₹2,731.8 | 150 ₹6,829.5 | 30 ₹1,365.9 | 25 ₹1,138.25 Lowest | 50 ₹2,276.5 | 50 ₹2,276.5 | 90 ₹4,097.7 |
| 5.00 | M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filing complete all as specified and directed. | 11.5 | Cum | 4,900 ₹56,350 | 4,500 ₹51,750 | 4,700 ₹54,050 | 5,400 ₹62,100 | 5,000 ₹57,500 | 5,100 ₹58,650 | 3,730 ₹42,895 Lowest | 4,000 ₹46,000 | 4,000 ₹46,000 | 4,000 ₹46,000 |
| 6.00 | M&L for brick work with Sub Class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in well /septic tank /soakage well complete all as specified and directed. | 49 | Cum | 7,999 ₹3,91,951 | 9,200 ₹4,50,800 | 9,500 ₹4,65,500 | 7,400 ₹3,62,600 Lowest | 9,000 ₹4,41,000 | 8,100 ₹3,96,900 | 9,000 ₹4,41,000 | 12,000 ₹5,88,000 | 8,500 ₹4,16,500 | 9,200 ₹4,50,800 |
| 7.00 | M&L for 75 mm thick cement concrete as in Sub Base type C2, 1:3:6 (40mm gde stone aggregate) as in sub base complete all as specified and directed. | 40 | Sqm | 325 ₹13,000 | 400 ₹16,000 | 400 ₹16,000 | 440 ₹17,600 | 350 ₹14,000 | 270 ₹10,800 Lowest | 980 ₹39,200 | 300 ₹12,000 | 300 ₹12,000 | 400 ₹16,000 |
| 8.00 | M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. | 40 | Sqm | 790 ₹31,600 Lowest | 1,600 ₹64,000 | 1,650 ₹66,000 | 1,180 ₹47,200 | 1,250 ₹50,000 | 1,400 ₹56,000 | 1,800 ₹72,000 | 1,000 ₹40,000 | 1,300 ₹52,000 | 1,200 ₹48,000 |
| 9.00 | M&L for 50mm thick wall panel made of 0.5mm thick hot dipped galvanised steel sheet on both side with 50mm thick layer of grid cfc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base panel 30x65x1.25mm thick density of foam shall be 40 kg/cum (+/- 2 kg/cum) the panel shall be precoated coated as approved by GE complete all as specified and directed. | 210 | Sqm | 2,700 ₹5,67,000 | 3,800 ₹7,98,000 | 3,700 ₹7,77,000 | 3,000 ₹6,30,000 | 3,000 ₹6,30,000 | 3,000 ₹6,30,000 | 3,250 ₹6,82,500 | 3,300 ₹6,93,000 | 2,800 ₹5,88,000 | 2,600 ₹5,46,000 Lowest |
| 10.00 | M & L 40 mm thick for ceiling puff insulated panel made of .5 mm thick hot dipped galvanised sheet both side with 40 mm thick rigid polyurethane with tongue and groove joint for interlocking to fixed with inverted CRCA Tee section of size 50x50mm and 5 mm thick and L section of size 50 x50mm and 5 mm thick to roof trusses complete all as specified and directed. | 165 | Sqm | 2,750 ₹4,53,750 | 3,700 ₹6,10,500 | 3,700 ₹6,10,500 | 2,900 ₹4,78,500 | 3,000 ₹4,95,000 | 2,900 ₹4,78,500 | 3,150 ₹5,19,750 | 3,100 ₹5,11,500 | 2,600 ₹4,29,000 Lowest | 2,600 ₹4,29,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹96,100
Closing Date
10 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS
GE 874 EWS C/O 56 APO
PROVN OF TOWER POST AT BHAGATPURA AND LIVING SHELTER AT LANGATE UNDER THE AOR OF GE 874 EWS
2025_MES_711737_1
GE 874/EWS-34/2025-26
Open Tender
Civil Works
Works
180 days
Kupwara
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE 874 EWS
₹96,100
8 Aug 2025
31 May 2025
12 Jul 2025
31 May 2025
10 Jul 2025
26 Jun 2025
Amount
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out any type of soil complete all as specified and directed.
Removing excavated material exc. 250mtr but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.
Returning filling in including spreading levelling watering & well Ramming in layers n. exc 25 cm thick complete all as specified and directed.
M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filing complete all as specified and directed.
M&L for brick work with Sub Class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in well /septic tank /soakage well complete all as specified and directed.
M&L for 75 mm thick cement concrete as in Sub Base type C2, 1:3:6 (40mm gde stone aggregate) as in sub base complete all as specified and directed.
M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for 50mm thick wall panel made of 0.5mm thick hot dipped galvanised steel sheet on both side with 50mm thick layer of grid cfc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base panel 30x65x1.25mm thick density of foam shall be 40 kg/cum (+/- 2 kg/cum) the panel shall be precoated coated as approved by GE complete all as specified and directed.
M & L 40 mm thick for ceiling puff insulated panel made of .5 mm thick hot dipped galvanised sheet both side with 40 mm thick rigid polyurethane with tongue and groove joint for interlocking to fixed with inverted CRCA Tee section of size 50x50mm and 5 mm thick and L section of size 50 x50mm and 5 mm thick to roof trusses complete all as specified and directed.
M&L for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.
M&L for rolled mild steel plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections and Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
M&L for preparation of newly surfaces of steel over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for rendering 15mm thick plaster on external surface of wall in CM 1:4 finished even and smooth without using extra cement.
M&L for applying two coat of cement base paint over a coat of primer including preparation of newly plaster surface complete all as specified and directed.
M&L for rendering 10mm thick plaster on internal surface of wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for 12mm thick plywood, grade BWR type BB, fixed with screws to timber frame work
S&F plain IInd class soft wood fillets of exc. 3 & n exc. 6 Sqcm, square, rectangular or triangular in section, clean swan, secured nails.
M&L for applying two coats of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2 in 100 mm thick as in sub base of floor all as specified and directed.
Material and labour for PCC (1:2:4) type B-1 40mm thick levelling in floor complete all as specified and directed.
Supply and fix Vitrified Ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 thick screed mortar in CM 1:6 complete all as specified and directed.
M&L75 mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and directed.
S&F anodised aluminium powder coating door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, rubber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F anodised aluminium powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminhun snap beading, screws etc. complete all as specified
S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.
S&F door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
S&F but hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100mm complete all as specified and directed.
M&L Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed.
M&L Aluminium handles, cast type, anodised 150mm complete all as specified and directed.
S&F Floor door stoper Aluminium 140 mm long complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality conforming to FE-410-s or FE 410-0 complete all as specified and directed.
All as per item No 37 above but 6 to 8 mm dia bars as in stirrups/ spacers
M&L for RCC 1:2:4 (12.5) mm foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for form work to side of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.
M&L for surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.
M&L for form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
M&L for formwork to staircases with sloping or stepped soffits including risers and stringers (Excluding landing) complete all as specified and as directed.
M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.
M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.
M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for providing reinforcement cement concrete M-25 (Design Mix) as in waste slab of staircase, Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified and directed.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. Note :- (WPC shall be paid separately)
M&L rendering 5 mm thick as in ceiling with CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash/colour wash on walls complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash/colour wash on ceiling complete all as specified and as directed.
M&L for mild steel work as in railing, stairs (framed) including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and as directed
S&F for mild steel framed work for such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290.Gde-E-165 complete all as specified and as directed.
M&L of 6mm thick E board (classic) of size 605x605mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including GI adjustable suspender of required length including taking down dismantling existing old ceiling of any description complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D2 (40mm graded aggregate) for floor sub base complete all as specified and directed.
M&L providing 25mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) , as in sub base in floor/paving etc finished even and smooth without using extra cement complete all as specified and directed.
M&L machine cut Kota stone flooring 20-25mm thick over 20mm thick cement screed (1: 6) base pointed and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L 50 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.
S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
S&F 1.00 mm thick Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.
S&F mild steel hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; etc and similar small articles conforming to Fe-290 Gde-E-165 pintel hinges (100mm long Pin,300 long flat iron of size 60x12mm complete all as specified and directed.
Removing excavated material (soil) n. exc 50m and deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/PVC conduit 20 to 25 mm dia (ISI marked) including sunk cast iron / pressed steel terminal boxes, junction boxes, other boxes sheet of suitable sizes for mounting of switches, socketes, fan regulators, light fittings etc. covered with 3 mm thick plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
All as per item No 65 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.
All as per item No 65 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.
All as per item No 65 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board.
S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.
S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed.
S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.
S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.
S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.
Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.
M & L for lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.
Supply and fix LED Bulb 9 Watt complete all as specified and directed.
S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.
S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.
S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and directed.
S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.
M&L for Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire complete all as specified and directed.
Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigerator including all accessories 20 litre capacity, 230 volts, 50 hz, refrigerant type R134A, complete all as specified and as directed.
S & F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five Star rated with brushless direct current motor, complete all as specified and directed.
S&F switch piano flush button single pole, one way 15 amps complete all as specified and directed.
S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.
S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v, 50HZ, RPM 1200, Copper winding of sweep 300mm, with complete all as specified and directed.
Taking up/down old unserviceable cable ,Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes 16 sqmm 2.0 core complete all as specified and directed.
Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed Note:-Punned thickness only shall be measured and paid.
Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed.
Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable protection of size 40 mm bore complete all as specified and directed.:-. (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule ):-
Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of size 10 sqmm 2.0 core complete all as specified and directed.
Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable protection of size 50 mm bore ;- Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.
Supply and fix CS mounted manual revolving search light LED type, white colour aluminium body operating voltage 230V, control gear type lamp wattage 250W, type of Lamp HPSV/MH maximum effective range 200 to 400 mtr complete all as specified and directed.
M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3352762)
M/S MANZOORAHMAD LONE (BID ID -3345287)
AAKASH CONTRACTORS (BID ID -3351727)
Concept Engineering & Constructions (BID ID -3353217)
M/S MIR BUILDERS (BID ID -3338719)
m/s mohd saleem and co (BID ID -3353470)
M/S IQ ENTERPRISES (BID ID -3353846)
patriotic builders (BID ID -3353886)
M/S BEE AAY CONSTRUCTIONS (BID ID -3353992)
Bidder Name
patriotic builders
M/S MIR BUILDERS
M/S MANZOORAHMAD LONE
M/s Sajad Hussain Wani
M/S IQ ENTERPRISES
M/S BEE AAY CONSTRUCTIONS
Concept Engineering & Constructions
AAKASH CONTRACTORS
M/S MUNEER AHMAD WANI CONSTRUCTIONS
m/s mohd saleem and co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .