Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹27.7 L+₹30,665 (1.12%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹28.2 L+₹86,480 (3.16%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest Bidder | |
| 4 | L4₹28.8 L+₹1.4 L (5.23%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest Bidder | |
| 5 | L5₹28.8 L+₹1.4 L (5.29%)Rejected-AOC PLOT NO 39 SHRI SHIVE NAGAR 05 MOTI BANDHA MACHEDA HARMADA JAIPUR 302013 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L5 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
16 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
WELCOME MAINT AND OTHER CERTAIN WORKS TO OFFRS MD ACCN IN ZONE - 1 (A) AREA UNDER AGE B/R - IV OF GE(S) JAIPUR AT JAIPUR MIL STN
2022_MES_544107_3
GE (S)/J-25P /2022-23 8733/E8
Open Tender
Civil Works
Item Rate
270 days
Jaipur
Class D and a(i) category
9 documents required · 9 mandatory
₹500
GE (S) Jaipur
₹70,000
Yes
22 Nov 2022
29 Oct 2022
18 Nov 2022
29 Oct 2022
16 Nov 2022
4 Nov 2022
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L 15 mm thick plaster in CM 1:6 on wall surfaces or concrete surfaces finished even and fair without using extra cement.
M&L 10 mm thick plaster in CM 1:3 on ceiling surfaces or concrete surfaces finished even and fair without using extra cement.
M&L for preparation of new plastered surfaces of walls & applying two coats of cement base paint over a coat of primer.
M&L for preparation of new plastered surfaces of walls & applying two coats of oil emulsion distemper over a coat of primer.
M&L for preparation of new plastered surfaces of Ceilings & applying two coats of oil emulsion distemper over a coat of primer.
M&L for preparation of new plastered surfaces of Ceilings & applying three coats of white wash.
M&L for Brick work with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 compplete all as specified.
M&L for complete removal of existing treatment on old plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer.
M&L for complete removal of existing treatment on old plastered surfaces of ceiling and applying two coats of oil bound distemper over one coat primer.
M&L for complete removal of existing treatment on old plastered of surfaces of walls and applying two coats of anti-fungal exterior acrylic emulsion paint over a coat of primer.
M & L for applying two coats of wall putty, 1 mm thick (overall) on wall and ceiling incl preparation of surfaces complete all as specified.
M&L for preparing old surfaces, plastered or unplastered on wall and applying one coats of oil bound distemper.
M&L for preparing old surfaces, plastered or unplastered on wall and applying one coats cement base paint.
M&L for preparing old surfaces, plastered or unplastered on ceiling and applying one coats of oil bound distemper.
M&L preparing old surfaces of wood or wood based material of any description exc 10cm width or girth and applying one coats of synthetic enamel paint.
M&L preparing old surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint.
M&L for preparation of old steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint.
M&L preparation of old plastered or unplastered surfaces on wall by brooming down including cornices,piller etc and aplying two of white wash on walls complete all as specified
M&L preparation of old plastered/un-plastered surfaces of ceiling by brooming down including cornices, piller etc and aplying two coat of white wash on ceiling complete all as specified.
Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy (Make-Jaquar Jaquar Cat. No. FUS – 29053 or Kohler Cat No.K-11791IN-4A-CP) and Equivalent cat part in other makes as per Appendix 'B'.
Supply and fixed in repairs CP WHB mixture cast coper alloy with central hole for WHB and long shank fancy type 15 mm bore complete all as directed.(Make-Jaquar Cat. No. FUS - 29005NB or Kohler cat No.K-18161IN-ND-CP) and Equivalent cat part in other makes as per Appendix 'B'.
Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed.(Make-Jaquar Cat. FUS – 29281 or Kohler Cat No. K-16298IN-9-CP) and Equivalent cat part in other makes as per Appendix 'B'.
Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long body (Make-Jaquar FUS - 29037, Kohler Cat No. K-11749IN-9-CP) and Equivalent cat part in other makes as per Appendix 'B'.
Supply and fixed in repairs CP brass kitchen sink mixer with pipe swinging spout wall mounted model with connecting legs & wall flanges complete all as specified complete. Make-Jaquar Cat. FUS-29165 or Kohler Cat No. K-373151N-4-CP and Equivalent cat part in other makes as per Appendix ‘B’.
Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock (Make-Jaquar FUS-29041or Kohler Cat No. K-37320IN-4-CP) and Equivalent cat part in other makes as per Appendix 'B'.
S&F in repairs CP overhead shower dia 105 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings Make - Jaquar OHS-1709 or Kohler Cat No. K-724191N-CP and Equivalent cat part in other makes as per Appendix 'B'.
S&F in repair CP Toilet paper holder complete all as specified and directed. Make : Jaquar Code (ACN-1153S or Kohler Cat No. K-56331N-CP) and Equivalent cat part in other makes as per Appendix 'B'.
S&F in repair CP single towel rail 600 mm complete all as specified and directed. Make : Jaquar (AKP-35711PS or Kohler Cat No.K-250651N-CP) and Equivalent cat part in other makes as per Appendix 'B'.
S&F in repair CP Soap dish complete all as specified and directed. Make :Jaquar Code (AQN-7731 or Kohler Cat No. K-56341N-CP) and Equivalent cat part in other makes as per Appendix 'B'.
S & F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. Make : Jaquar CAT Part No. ALD-577 or Kohler Cat No. K-129271N-CP and Equivalent cat part in other makes as per Appendix 'B'.
S & F in repair CP hand shower 105 mm dia round shape multi flow with air effect (ABS Body & Face Plate Chromium Plated) with rubit cleaning system and incl Easy flex tube in chromium finish 1.5 meter long with both end nuts complete all as specified and directed. Make : Jaquar CAT Part No. HSH-1721 or Kohler Cat No. K-72421IN-CP and Equivalent cat part in other makes as per Appendix 'B'.
S & F in repair Corner glass shelf (with bracket). Make : Jaquar, CAT Part No ACN-1173 and Equivalent cat part in other makes as per Appendix 'B'.
S & F in repair CP towel ring round complete all as specified. Make : Jaquar, CAT Part No AQN-7721 or Kohler Cat No. K-5631IN-CPand Equivalent cat part in other makes as per Appendix 'B'.
S&F in repair PVC connection 15mm dia 45cm long with 2 Nos brass check nuts with washer complete all as specified
S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified
S&F in repair 32mm dia PVC waste pipe flexible type for WHB 60cm long with union all as specified
S&F in repair waste fittings brass chromium plated 32mm dia for wash hand basin all as specified
S&F in repair 40mm dia PVC waste pipe for kitchen sink 60cm long with union all as specified
Taking down GI tubing 15mm dia, with connections.
Taking down GI tubing 20mm dia, with connections.
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete.
All as per item No. 42 above but 20 mm bore pipe complete.
M&L in repair PVC Flushing cistern 10 ltr capacity white, with inlet, ball valve, float and handle, high or low level including bracket & 32 mm dia flush pipe etc all as specfied and directed.
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat and seat cover closed open recessed/white with mild steel chromium plated or aluminised hinging device including connection to drowm pipe and flushing pipe all as specified.
S&F in repairs wash hand basin vitreous china white (flat back) of size 550x400mm CI bracket 15mm dia polythene connection 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified, including taking down the existing wash hand basin.
S&F in repairs white rimless bowl for coupled WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set,S trap, incl all neccessories items complete all as specified. Make : Jaquar, CAT Part No ONS-WHT-10201or Cera Cat Part No. S1013106 and Equivalent cat part in other makes as per Appendix 'B'.
S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mmincluding all fittings complete all as specified. Make : Jaquar Cat No. CON -FSS-WHT-29601 and Equivalent cat part in other makes as per Appendix 'B'.
S&F in repairs white vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe PCC bed) including connection to down pipe and flushing pipe all as specified.
S&F in repair CP brass bottle trap 32mm dia including joining to waste fitting and waste pipe complete all as directed
S&F in repairs CP grating 125mm dia round without waste hole fixed on floor/nahani trap fixed with cement complete.
S&F in repairs CP grating 125mm dia round with waste hole fixed on floor/nahani trap fixed with cement complete.
Dismantling of floor /skirting ( terrazzo/ PCC / Ceramic Tiles) including cement mortar bedding (but not backing ) and removing the rubbish from the site.
M&L for double charge vitrified ceramic coloured tiles (of approved light shade) of size 600x 600mm, 9 to 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15mm thick 1:6 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified
All as per item No. 54 but on vertical surfaces such as skirting, dados and riser etc including a layer of screed bed 10mm thick 1:4 all as specified.
M&L glazed ceramic tiles in vertical surface 300x600x7 to 8 mm thick set and jointed including 10mm thick layer of screed bed in cm 1:4 on verticle surfaces and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as on verticle surfaces as skirting and dado etc,complete all as specified and directed.
M&L Non skid ceramic coloured tiles 300x300x7 to 8mm thick area of each tile exceeing 0.09 sqm but n.exc 0.11sqm in floors etc set and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match the shad of tile complete all as specified and directed.
M&L for non-skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for PVC moulded chequered cement concrete tiles 20cm x 20cm x 25mm thick with gray cement and pigment, set, jointed and pointed in neat cement slurry including a layer of screed bed 20 mm thick 1:6 and pointed in coloured cement to match the of tiles complete all as specfied
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar.
M&L for granite stone slab machine cut 18 to 20mm thick as in counter slabs of WHB (of any type) work (table rubbed and polished) in cooking plate forms, counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
S&F in repair 20mm dia stainless steel conduit pipe with bright finish pipe of required length for curtain rods and decorative knobs at each end as specified and directed by Engr -in- Charge
S&F in repair S S bracket holder for curtain rods 20mm dia fixed with screws to pelmet boxes all as specified and directed by Engr -in-Charge.
S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large (trade pattern) plates etc made out of stainless steel 24 gauge grade 304, fixed with rawl plug and CP steel screws all as directed of approved quality.
Taking down chowkats or frames (W/out taking of shutters) not exceeding 1.5 Sqm each.
Taking down chowkats or frames with shutter (W/out taking off shutters) exc 1.5 Sqm but n.exc 4 sqm each.
Taking down shutters of any description n exc 1sq. m each
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. meach
S & F framed work as in doors or gates of angle or other section as chowkhat or shutters, tie bar, hold fast, guard bars, cooler stand, brackets etc and fixing complete Fe 290 (Gde-E-165)
S&F 35 mm thick IInd class Hardwood plain factory made, framed, paneled shutters (any number of panels), with panels of 12mm veneered particle board medium density, wood particle board with commercial face veneers complete all as specified in SSR Part -I, Secrion 8, clause 8.24(a).
S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
S&F 35 mm thick IInd class hard wood factory made glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I section 8 clause 8023 (a) complete.
Taking down & refixing same opening after edging of Shutters of any description exc 1 sq. m but n.exc 2 sqm each complete all as specified.
S&F for 2nd Class hard wood wrought plain fillets square, rectangular or triangular in section n exc 3 sq cm fixed with nails complete.
M& L preparation of new or prevously untreated steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.
M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer.
S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforce with M.S square tube, high strength suppling & fixing in opening as per specification
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specification.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete.
S&F MS butt hinges medium weight cold rolled 100mm long complete.
S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F 150mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S & F floor door stopper of aluminium body and tongue with hard drawn steel spring overall length of cover plate150mm complete.
S&F aluminium sliding door bolt 250mm with sand or die-cast aluminium hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples complete all as specified.
Supply only Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
Hacking out old broken glass any thickness size, quality or description from wooden/ steel frames fixed with beads/ metal pinning and S&F 3mm thick sheet glass plain ordinary quality in square not exc 0.50 Sqm in each pane fixed with wooden beads or putty ( in metal frames etc) complete all as specified
S&F in repair Door closer Aluminium (Diecast) body hydraulically regulateld, designation No. 1 univerasl type, suitablee for door shutters up to 700 mm in width and of weight not more than 35kg and fixed
Cutting holes for inserting hold fast and making good to the disturbed portion with cement mortor 1:3 or PCC 1:3:6 exc half brick wall n. exc one brick wall.
S&F in repair Mirror cabinet PVC/fiber of size 550 x 520 x 100 mm with sliding mirror 4mm thick of size 240 x 290 x 2 Nos with built in rack of size 230 x 150 x 90 mm with PVC plug etc with CP towel rail of length 270 mm and 100 mm dia complete.
S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling & waste pipe, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410mm x 330mm x 160mm complete all as specified.
S&F in repair steel window handles, box type hinges and peg stay etc including welding if required all as specified
Dismantling boarding plywood etc of any description and in any position fixed with nails etc all as directed.
M&L in repairs 18 mm thick (one side decorative lamination and other side balancing white lamination ) solid PVC board with cement solvent adhesive for shutter,kitchen cabinet/ cup board /partition wall/ wall cabinet complete all as specified and directed.
S&F auto soft close clip on hinge bright finish (Auto close hinges MS) complete all as specified.
S&F 125 mm dia oval shape brass handle fancy type bright finish complete all as specified.
S&F in repair stainless steel (SS 304) Kitchen cabinet basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F in repair stainless steel (SS 304) plate Kitchen cabinet basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F in repair stainless steel (SS 304) cup & saucer Kitchen cabinet basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F in repair stainless steel (SS 304) cutlery & spoon Kitchen cabinet basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F basket/trolly telescopic channel 50 cm long extruded MS galvanised over roller suitable upto 35 to 50 kg weight capacity complete all as specified.
S & F in repair aluminium floor door stopper 140 mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete
M&L for welding in repair of Box type steel windows existing damage / broken hinges, handle, frame and any other parts of n. exc. 2.5 cm in length and n. exc. 6 mm in thickness to achieve smooth function complete. (Note : 1. Skilled labour (welder) and welding items like hinges, handle, peg set etc also includes in the rate 2. wire mesh will measure and paid separatly)
Repairing of existing aluminium door single leaf exc 1.00 Sqm but nexc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc eac nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neosprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item.
Ditto all as above item No 105.00 but door/window/ventilator shutter but n exc 1.00 sqm ditto
Supply Only neosprene rubber beading suitable for aluminium door / window panels superior quality complete.
S&F in repair for 100 mm size mild steel body 4 lever mortice lock vertical type of size
S & F 75mm size hasp and staple, safety type, aluminium anodised and fixed with screws complete.
S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete all as specified
S & F factory made steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded incl inserting the hold fast in stone masonry and make good the disturbed masonary
S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars all as specified
S & F 3 mm thick froasted glass and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete.
S & F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane.
Supply and fixed in repairs plastic water closet seat black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete as approved.
M & L for grinding & polishing on existing terrazo flooring with grinding materials complete all as specified and directed.
Demolition of existing water tanks exc 250 but not exc 500 ltrs capacity and disconnecting complete all as directed.
Demolition of existing water tanks exc 500 but not exc1000 ltrs capacity and disconnecting complete all as directed.
S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) 3 layer construction hoisted and fixed in position 500 ltrs capacity including connecting and refixing the existing GI pipe and fittings complete all as directed.
S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) 3 layer construction hoisted and fixed in position 1000 ltrs capacity including connecting and refixing the existing GI pipe and fittings complete all as directed.
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for exc 500 n. exc 1000 ltrs capacity of tanks as directed by eningeer -in-charge.
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for exc 250 n. exc 500 ltrs capacity of tanks as directed by eningeer -in-charge.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .