Civil Interior Electrification Data Communication Telephone and Air Conditioner Alteration works at Calibration Test Facility at BTF Building in NIOT campus

Dismantling frame ,doors, windows and clerestory windows shutter including chowkhats, architrave, holdfasts etc all complete and stacking within 500 metres lead.Of area beyond 3 sq. metres. Location :BTF Building/Ground floor.

Dismantling of partitions,fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 500 meters lead as directed by Engineer-in-charge.Note : Expect Aluminium & GI Section all other demolished debris material should taken outside the campus (rate inclusive of debris material taken out from the campus).Location :BTF Building/Ground floor.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand).Note : M Sand may be used.Location :BTF Building/Ground floor.

12mm cement plaster on the of single or half brick wall of mix : 1:4 (1 cement:4 fine sand).Note : M Sand may be used.Location :BTF Building/Ground floor.

Exposed Aggregate Finish Plaster: Exposed aggregate finish plaster shall consist of 12mm thick plain cement plaster under layer (1 cement : 4coarse sand by volume) finished rough and 20mm thick top layer. White and coloured marble chips shall be of 6mm to 12mm size out of Makrana/Ambaji grade 1 or Dongri Chittor Brown/Rajnagar/abu gree grade-1 quality. The whole plastering laid in panels as per drawing with 12mm x 20mm grooves in between formed by holding removable wooden battons of 12mm x 25mm size over the under layer. Marble chip Samples/ Mockup to be approved by project Engineer Before Procurement of raw material. Cost inclusive of conveyance of all materials like cement, sand, bricks, water, etc., to site, cost of seignorage charges on all materials and all incidental and operational, labour charges, like mixing of cement mortar scaffolding charges, finishing lift charges curing charges, hacking the surface and chesilling the undulated surfaces wherever necessary etc all complete as per direction of Engineer in charge. Location :BTF Building/Ground floor.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).Location :BTF Building/Ground floor.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.Location :BTF Building/Ground floor.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.Location :BTF Building/Ground floor.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.Location :BTF Building/Ground floor.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.Location :BTF Building/Ground floor.