Nit No. 04 Item No. 06

PETROL OPERATED CHAIN SAW Engine :SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY Displacement: 45.4CC POWER OUTPUT:2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPM Carburetor: Diaphragm type & compensator technology. Fuel tank capacity: Should be minimum 450 ml. Dry weight( without cutting attachment ): Should not be more than 5.0 KG Clutch: Clutch shoe LININING metal ONLY. Guide Bar Design: Should be Rollomatic type. Guide Bar Length: Guide bar length must have 50 cm/20" inch. Guide bar and Chain: Should have same manufacture only. Chain Type: Every drive link require groove & small oil receiver hole for beter Lubrication. 0.325 inch Pitch & 1.6 mm thickness only. chain Lubrication System: Fully automatic ,speed controlled rotary oil pump Chain oil tank capacity: Should be minimum 200 ml. oii Pum Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable. Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off. |Guaranteed Sound power level: Should not be more than115 Db(A) Maximum chain velocity to ISO 11681: Should be minimum 28 m/s

PETROL OPERATED BRUSH CUTTER Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compernsator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right lhandle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 |Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certification

TELESCOPIC PETROL OPERATED POLE PRUNER Engine : Single Cylinder, 2 Stroke, Air cooled Only Displacement: Should be between 25-30 CC POWEROUTPUT: Should be minimum 1.2 HP Weiaht (Dry without cutting attachment & fuel ): Should not be more than 7.5 Kg Fuel tank capacity (ml): Should be minimum 400ml Chain oil capcity (ml): Must have minimum 200 ml. lClutch: Clutch shoe linining should be metal only. Guide bar length : Minimum 30cm Guide bar And Chain : Should have same manufacture only Chain Type : Every drive link need groove & small oil holes for better Lubrication. Saw chain pítch should be 1/4" OR 3/8Picco only and drive link thickness must havel 1.1 mm or 1,3 mm. Max.output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket. Equipment total Length with guide bar and chain ( cm ): Should be mimimum l220 cm - compressed & total length of equipment - minimum 350 cm - Extended. Sound Pressure Level (Db/A): Should not be more than 95 Db(A) vibration Measurement m/s2 at control handle - Extended Poistion : Should notl |be more than 5.5 m/s2 Certification: Must have TUV certification with test standard EN ISO 11680.

Petrol Lawn Mower: Specification: Type of Machine Walk behind Lawn Mowers Power Source Petrol Engine Engine displacenment 165 CC Start Type Recoil / Pull Start Speed control Variable Speed |Drive Type All Wheel Drive Blade style Rotary Type Blade Engagement Electromagnetic Cut Width (mm) 525 to 549 Minimum Cut Height 20 millimeter Maximum Cut Height 80 millimeter Blades Hardened steel Number of Blades 1 Number of positions for cut - height adjustment 6 |Number of levers for Cut -height adjustment: Single lever Number of Wheels 4 Front Wheel Size 203 millimeter Rear Wheel Size 250 millimeter Wheel Tyres Pneumatic |If yes, Grass Catcher / Collector / Bag Volume 70 liter "Engine Power Rating (Watt)" 4000 to 4999 Engine Fuel Tank Capacity - 1.4 Ltr.

Supply of Telescopic Pole Pruner: Specificaion: Pole length incuding blade: 5 m Blade Material: Hardened & Tempered high carbon steel.The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15"-16" Pole type: Light weight telescopic tubular aluminium alloy extendable pole No of positions for pole Height Adjustment: 10 positions Locking Mechanism : Ergonomicvaly designed two way locking mechanism Total Working length: Max 219"(6623 mm), Mln 103" (3103mm) Branch cutting capacity: 200mm max

Supply of PVC pipe of 1’ Size of good quality

Please Enable Macros to View BoQ information