CERTAIN REPAIRS TO FLOORING, PLASTERING, LEAKAGE/ SEEPAGE, ROOF SHUTTERS AND OTHER MISC WORKS IN SERVANT QTRS AND GARAGES OF MD OFFR ENCLAVE IN THE AOR OF AGE B/R SP MARG UNDER GE NEW DELHI

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness ( below or above ground level) complete all as specified and directed.

M&L 40 mm thick, cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, finished even and smooth with out using extra cement complete all as specified and directed.

S&F glass dividing strips 3 mm thick and 38 mm wide, inserted in position and confirming to design complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided as in sunken portion complete all as specified and directed.

M&L for 15mm thick cement plastering on brick or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed. Note : WPC shall be measured and paid separately.

M & L for Plain cement concrete (1:5:10) type E-2 using 40mm brick course aggregate as in filling under floor as in sunken portion complete all as specifed and directed.

Supply only water proofing compound (PIDIPROOF-LW PLUS) or equivelent.

M&L for 25mm th PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in flooring, finished fair and even, mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed. Note : WPC shall be measured and paid separately.

S&F in repairs Vitreous China squatting pattern, Orissa pattern size 580 x 440 mm white with integral foot rest ( excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

SF in repairs PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.

S & F in reairs cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint laid in trenches or floors, including taking down old unserviceable CI pipes complete all as specified and directed.

S & F in repairs cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding taking down old unserviceable CI pipes complete all as specified and directed.

S & F in repairs cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint laid in trenches or floors, including taking down old unserviceable CI pipes complete all as specified and directed.

S & F in repairs cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to wall on any height of building including taking down old unserviceable CI pipes complete all as specified

S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.( Fixed in repair)

S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.( Fixed in repair)

S & F CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with oval access door complete all as specified and directed.( Fixed in repair)

S & F CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured) with oval access door complete all as specified and directed.( Fixed in repair)

S & F CI bends 100mm dia (any radius), with duck's foot or heel rest complete all as specified and directed ( Fixed in repair)

S&F CI nahani trap with grating including jointing to waste pipe , dia of outlet 75mm fixed in PCC 1:2:4 type B1 all as specified and directed. (ISI Marked)

Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed.

M&L for Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.

M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples and fixed in repairs complete all as specified and directed.

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and appying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/ 300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified and directed.

M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints as in concealed /open pipe work , medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections of 15 mm bore including new fiitings in new or old position complete all as specified and directed.

Bib tap, 15 mm bore, stamdard of PTMT any colour high pressure screwed for iron pipe and fixed in repair all as specified and directed.

Stop valves or angle valve type, cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed (fixed in repairs).

PVC connections 15 mm size with PTMT nuts of length 600 mm. (fixed in repairs)

M&L for Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed. (fixed in repairs)

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc to receive new plaster complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:6, on other than facaes of brick work or cement concrete surfaces (internal surfaces), finished even and smooth complete all as specified and directed.

M&L for 10 mm thick cement plastering , in patches n.exe 3 sq m each, in CM 1:3 on ceiling / chajjas etc finished even & smooth without using extra cement completed as specified and directed.

Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or cement concrete surfaces (External surfaces), finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall of any description not otherwise described and applying two coats of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each.

Taking down shutters of any description n. exc 1.00 sqm each.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each .

Plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

Stainless steel fastner of size 200 to 250mm for fixing wooden door frame and like in postion all as specified and directed.

MS flat iron as in hold fast, bands,straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates;hook and pintle hinges large hasps andstaples; chains, hand madesliding bolts; clamps; hold fasts; wall ties, hooks for hangingfans; plainangle cleats forsecsuring purlins to wood trusses orrafters; knee piece inserts; twoway and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 all as specified and directed.

PCC 1:2:4 type B-1 (20mm graded agg) as in anchorging hold fast etc bed plate etc all as specified and directed.

2nd class hard wood 30mm thick glazed and skelton window and ventilators shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters as specified and directed.

35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter all as specified and directed.

Aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick ( style) consisting of frame made of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted with MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement all as per specification and drawing.

S&F Stainless steel butt hinges of size 100mm fixed complete all as specified and directed.

S&F aliminium anodised tower bolts of extruded section of 150 mm long complete all as specified and directed.

S&F Aluminium handles,cast type, anodised 150 mm long, complete all as specified and directed.

S&F MS pressed handles oval type stove enamelled black, 150mm size as in repair complete all as specified and directed.

S&F MS pressed handles oval type stove enamelled black, 100mm size as in repair complete all as specified and directed.

S&F mild steel barel tower bolts, stove enamelled black with bright bolts and fixed 200mm long bolts in repair complete all as specified

S&F mild steel barel tower bolts, stove enamelled black with bright bolts and fixed 150mm long bolts in repair complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads or including punching or drilling out old glazing pins/spring clips all as specified and directed

S & F Sheet glass, 3mm thick ordinary quality, in squares n exc 0.50 sq. m each pane glazing with oil putty or glazing clips or wooden beadings, aluminium beadings etc all as specified and directed.

S&F mild steel sliding door bolts, plate type stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of six bolts and nuts, four on bolt plate and two on staple plate of 250 mm long complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

M&L 75 mm thick, cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in flooring, finished even and fair with out using extra cement complete all as specified and directed.

M&L 50 mm thick, cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection, finished even and fair including provin of groove in plinth protection not exc 3.00 Sqm panel and filling of joints/groove with mixture of sand and bitumen in the ratio of 1:2, grade of bitumen 85/25 complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing, and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary portland cement 43grade and 2part of Ghagger sand mixed with adhesive/admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in Cement Mortar 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc all as specified and directed at site. (All services and work incl internal and external surfaces and members of six storey building).

M&L expanded metal,cut to length, bent to shape required of mild steel wire mesh of size 100 x 100 mm x 3.15 mm dia welded mesh tying with mild steel wire not less than 0.90 mm dia binding wire or galvanised wire stales complete to existing reninforcement or steel members. (Mesh weight not exceeding 4.00 kg/sqm) complete all as specified and directed.

M&L uprooting grass/ plants (girth n.exc 15 cm of trunk to any of plants 100mm grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth all as specified and directed.

Raking out joints/pointing to brick tiles, laid flats in floors, roofs, aprons etc work built in cement mortar all as specified and directed.

M&L flush pointing to brick tiles laid flat in roof, aprons etc in CM 1:3 complete all as specified and directed.

Taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of bolts and nuts as required for smooth functioning of shutters and refixing the same incl hood cover complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description no otherwise provided for as in grills, framaed railing etc all as specified and directed.

S& F in repairs mild steel lock plate & handles made of of Flat iron 35 X 5 mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F in repairs mild steel helical wire springs (confirming) to IS-6248-1970) for shutters not exc 12 Sqm of approved make complete all as specified and directed.

S & f in reapairs 3.15mm thick mild steel bracket plate hexagonal or circular in shape incl welding complete all as specified and directed.

S & F in repairs MS Black pipe 40mm dia medium grade for rolling shutters shaft incl drilling holes for fixing springs and welding to MS brackets plate compelete all as directed. Note : MS brackets plates shall be measured and paid for separately.

S & F for replacement of inter locking lath section formed from rolled MS strips 1.20mm thick for shutters above 3.5m width complete all as specified and directed.

S & F in repair of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position all as specified and directed. complete manual type thickness of lath 1.00mm.

M&L applying two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description over 10 cm width or girth including preparation of new surfaces complete all as specified.

M&L preparation of old painted surfaces and applying one coat of synthetic enamel paint on stone surfaces of any description over 10 cm width or girth complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specified and directed.

B S R Enterprises

M/S SONU ENTERPRISES

Som Nath Kakkar