REPAIRS TO TOILET KITCHEN TILING PLUMBING WORK AND SANITARY FITTINGS IN MD AND OTM ACCN IN ZONE A AREA AT NDA KHADAKWASLA

Amount

Dismantalling floor hearth and wall tiling incl cement mortar bedding but not backing complete all as specified

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (above or below ground level).

Dismantling stone slab of any description or thickness in floors, approns etc

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:6) bedding all as specified and directed by Engineer-in-Charge

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:6) bedding all as specified and directed by Engineer-in-Charge

M&L for ceramic tiles as in vertical surfaces of size 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing plaster in CM (1:4) complete as specified and directed by Engineer-in-Charge

M&L for vitrified coloured ceramic tiles in flooring 10mm thick (square/rectangular) polished laying in design pattern (Pattern approved by GE) area of each tiles not exceeding 0.36 Sqm in floor etc laid bedded over 20mm thick CM (1:6) bedding & pointed in white/coloured cement to match coloured tiles etc complete with bedding all as specified.

M&L for vitrified coloured ceramic tiles 10mm thick and 10 cm height as in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match tiles incl 10 mm thick backing plaster in CM (1:4) complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregates) as in sub base 50 mm thick

Taking down chowakat with shutters of any description n exe 1.5 sqm each

Taking down chowakat with shutters of any description exc 1.5 sqm but not exc 4.0 Sqm each

Taking down shutters exc 1 sqm n exc 2 sqm each

Taking down shutters exc 2.0 sqm each

M&L for second class hardwood plain solid straight chowkhats and frames, wrought, framed rebated of the solid rounded or chamferred put together with the pinned and joints.

M & L for second class hardwoord, 35mm thick, plain, framed, panel shutters (any number of panels) of timber flat on both sides all as specified and as directed.

S&F second class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Sec 8 Cl 8.24 (a), 35mm thick complete akll as specified

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed

M&L for Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick (style)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face,supplying and fixing in frame at site as per specification and drawing and as directed by Engg-In-Charge.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth

S&F aluminium powder coated three track sliding window with 5.5 mm thick tinted glass shutters and stainless steel mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed (a) Bottom frame - 20620, (b) Top frame and vertical - 20621 (c) Handle (side) - 20606, (d) Shutter inter lock - 20724, (e) Shutter top & bottom - 20844 & (f) glazing clip -19352

Dismantling wrought iron or mild steel work of any description not other wise provided for

S&F frame work such as grills, gratings,hold fast etc, with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars barred iron doors ladders framed balusers walk ways railing etc and similar work conforming to Fe.290Gde-E-165

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from wooden/metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones

S&Fin repairs sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane.

S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of wire average width of apperture 1.40 mm and fixed in steel window with aluminium clip / wooden beading /stainless steel nut bolt all as specified and directed

S&F butt hinges, medium weight, cold rolled mild steel , size of hinges 100mm and fixed to wooden surface

S&F for 150mm long aluminium anodisedl barrel tower bolt , extruded and fixed complete

S&F extruded aluminium alloy handle fabricated type annodised size of handle 100mm

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections fixed complete all as specified and directed.

Dismantling of wooden cabinet and cupboard fixed in any position

M&L 12mm thick plywood, grade BWR fixed with screws to timber frame work

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

M &L Ball catches with 8 mm dia steel ball, and brass body and strikoing plate including letting in and fixed

S&F for 100 mm long stainless steel fancy type handle for cupboard,cabinet ,etc.

M & L for first class hardwood fillet Plain fillets, square, rectangular or tringular in section clean sawn, secured with nails or brads Ares not exc 4 sqcm cross sectional area.

M & L for french polishing on wooden surfaces of any description, including cleaning and preparing the surfaces including a coat of wooden filler on new works with two or more coats

Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, Both face is covered with decorative face veneer with lipping/frame to match including all side lipping wooden fillet wrougnt and fixed to wooden/ steel chowkets all as specified and directed by Engr-In-Charge.( note: decorative lamination veener sheet mesured and paid sepratly

M&L for 0.9mm thick decorative laminate type I, of surface finish, colour and pattern as approved , fixed with approved adhesive as per manufacturer,s instructions.

S&F SS steel barrel tower bolt of extruded section and fixed complete length of bolt 200 mm

S&F 250 mm long SS sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltsof extruded sections all as specified and directed

S&F SS Butt hinges, medium weight, cold rolled, mild steel length of hinges 100 mm

S&F SS handle cast type, finishing, size of handle 150 mm

M&L for 35 mm to 40mm thick unpolished cudappah stone slab as in cooking platform below granite stone and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

M&L for 20-25mm thick unpolished cudappah stone slab as in vertical support for cooking platform and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

M & L for 16-18mm thick granite (of any type) work (table rubbed and polished) as in cooking platform , wash basin platform, frame and like in CM (1:4) including pointing in white cement (1:2) using dust with admixture of pigment to match with shade of granite over cement slurry 20 mm thick in CM (1:6) complete all as specified and directed

M&L for 16-18 mm thick granite (of any type) work (table rubbed and polished) as in vertical surface (fasia ect.) and like complete all as directed by Engineer-In-Charge.

Labour only for chamferring and rounding the straight cut edges of stone slab such as in steps , cooking platform and other similar situations complete all as specified

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar on the dwarf wall or incl fixing cantilever brackets and incl all necessay fitting , connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330 mm x 160 mm

S&f in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F for in repairs Stainless steel plate utensil rack of size 900 X 600 X 1mm thick, 30cm width and fixed to wall surface with necessary bolts complete all as specified

S & F in repairs vitreous china ware wash basin white, flat back size 550 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let PVC connections 600 mm complete all as directed.

S&F in repairs 15 mm bore pillar taps complete all as specified

S&F in repairs Vitreous china wash down water closet (Pedestal pattern) with P or S trap , white in colour including fixing bolts, connection to drain and to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete

S&F in repairs for providing bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia

S&F in repairs hand shower (health faucet) with 8 mm dia, 1 mtr long flexible tube and wall hook complete all as spd.

M&L in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup complete all as specified.

S&F in repair CP towel rack hanger 600mm long fixed on wall complete all as specified

M & L for in repairs for providing stop cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup concealed or angular complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe)

S&F in repairs PVC low level flushing cistern with dual flushing system including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete

M&L for providing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plates brackets, guard and railing 60cm long all as directed by Engr-in-Charge

S&F in repairs, Corner glass shelf of 8 to 10 mm thick glass alongwith railing and fixed with D or F brackets complete all as directed.

S & F in repairs tubular towel rail 20mm dia 'D' type 60cm long of brass chromium plated complete all as specified

S & F in repairs chromium plated overhead shower rose 125 mm dia with or without swivel joints fixed to 15 mm bore of pipe.

S&F in repairs Wall mixer 3-in-1 System with provision for both teliphone shower and overhead shower complete with wall flange with 115 mm long bend pipe

S&F Low density polyethene pipe of preassure rating 6kgf/cm2 fixed complete to wall,ceiling or in floor ,including all necessary assesories as elbow, bend, socket etc as in waste pipes ,40 mm dia bore for wash basin, sink etc.

S/F bathroom cabinet of size 450 mm X 300mm with door and shelves and mirror in front side of door and fixed to PVC wall complete with washer

Taking up or down 15 mm bore steel/any other tubing and connections, including cleaning for refixing or removal to store all as specified and directed

Refixing old steel tubing 15 mm bore pipes and connections in new or old positions (walls, ceiling, floors etc)

S&F 15 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed by Engr-in-Charge

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Refixing old steel tubing 20 mm bore pipes and connections in new or old positions (walls, ceiling, floors etc)

S&F 20 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed by Engr-in-Charge

M&L for 75 mm dia PVC floor trap with grating including jointing with solvent cement concrete type B-1 (1:2:4) fixing in repairs complete all as specified and directed by Engineer-in-Charge

M&L for 100 mm dia cast iron Nahani trap, with grating including jointing cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted with all accessories and fixed in position complete all as specified and directed

Dismantling water tanks of capacity exc 500 & n. exc 1000 ltrs and removing to store complete all as specified and directed

Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facing dressed stone work and pre cast concrete articles.

M&L for precast cement concrete block masonry with solid block, type C-1,(1:3:6) mix ( using 20mm graded stone aggregate ,exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified.

M&L for rendering 15mm thick cement plaster in CM (1:6) surface finished even and smooth without using extra cement complete.

M&L for preparation newly plastered surfase of wall and applying two coats of Oil bound Distemper including 3mm thick wall care putty complete all as specified

M&L for preparation of newly plastered surface of external wall and apply two coat of cement base paint complete all as specified and directed

M&L for complete removel of existing treatment on old plastered surface of wall and applying two coats of OBD complete all as specified

M&L for preparation of new or old wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as directed.

S Y Itkar Construction and Company

ELIEYAS TRADERS