CA NO. GE(W)/HSR-57/2025-26 REPAIR / REPLACEMENT, CLEANING AND CONNECTED ITEMS OF SEWAGE LINES OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR

Complete Dewatering/Desilting/De-sludging of Septic tank by removing all sludge (in liquid,semi liquid or semi-solid state) both organic or inorganic in nature by vacuum process closed tanker tractor driven and disposing off the same to a distance exceeding 1.5km but not exe 5km at places complete all as specified and directed.

Cleaning of manholes n. exc. 3mtr deep by means of removing the silt, sludge, etc & bailing out water complete manually or mechanically and depositing where directed including covering the same with at least 30cm thick layer of soil all as complete all as specified and directed.

Description all as per item No. 2.00 above but depth exc. 3mtr but n. exc. 6mtr complete all as specified and directed.

Attending day to day complaints for cleaning of localised blockage from floor/Nahani trap, soil waste pipe, WC, chocked rain water pipe etc upto and including 1st manhole and removing sludge water/waste upto 50 metre distance and burring the same in pit complete all as specified and directed. Note : - (i) The unit rates quoted in above items shall deemed to be included for removing of solids, liquids and sludge etc of any description from manholes (ii) OTM & MD accn of Offrs and JCOs/OR ,,and all other type of accn incl MES Colony in Zone 'A' area under AGE B/R-II of GE(W) at Hisar Military Station (iii) All indls will report at complaint cell of AGE B&R-II of GE (W) Hisar alongwith a supervisor deputed by contractor to concerned indl will take attendance on daily basis. (iv) Contractor will collect the collect the complaint slip & submit the same in the evening after attending the complaints. (v) In case of any complaint is not attended by contactor withing 24 hours of reporting, then compensation @ Rs. 50.00 (Flat rate) will be deducted and Rs. 20.00 extra in addition to initial penalty of Rs. 50.00 for each further 24 hours delay.

Cleaning of underground sewage line of any type and size up to and including 200 mm dia including all in working and running condition involving removal of blockages of any kind of sewage lines by means of either by mechanical rodding or with manual rodding with vibration /drilling concept ie trolley mounted motorized sewer cleaning machine including desluding descaling & dechoking of line wherever required, flushing the entire stretch with whatever way possible including combined high pressure water jetting com suction (vaccume )type machine suitably fabricated on HCV having facilities of hydraulic application through high pressure thermoplastic, making the stretch clean, functional and removal /deposition of sludge inclusive of solids of any type & sludge water to a distance exceeding 1.5 km but not exc 5 km and covering the entire sludge and solids with local earth complete all as specified and directed.

Description all as per item No 5.00 above but exc 200 mm and upto 600 mm bore sewage line.

Demolition of cement concrete (unreinforced) of any description below ground level complete.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land complete all as specified and directed.

M&L for old size brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M & L for Brick work of old size Bricks, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete and all as specified and directed.

M&L brickwork with sub class 'B' old size brick laid on edges in floor in drain bedded and jointed in cement and sand mortar (1:6) complete all as specified and directed.

M&L Flush pointing to brick walls/floors, surface channels, drains, roofs etc in cement mortar 1: 3 finished even and smooth complete all as specified and directed.

M&L Racking out joints/ Pointing to brick work in wall or bricks on edge in floors, surface channels, drains, roofs etc and pointing to brick walls in cement mortar 1: 3 finished even and smooth complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement) in cement plaster 1:4 complete all as specified and directed.

Taking down of existing plaster of any description complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement) in cement plaster 1:4 complete in Sunken part of backside of Bldg complete all as specified and directed.

M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of white wash complete all as specified and directed

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete all as specified and directed.

M&L plain cement concrete type B1 1:2:4 (20 mm graded aggregate) in Bed to drain and mass concrete complete all as specified and directed.

M & L for cleaning drain including removing of all sludge, mud, foreign material, sand, ashes, fibre, silt, grease, night soil etc to maintain fllow of water and removing the taken out sludge /material out side of MD land by any means/source complete all as specified and directed.

M&L for precast casting reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes / GT (square / rectangular / circular ,cover slab over drainage line of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:4 including necessary use and waste of formwork and demolition of existing RCC cover slabs if any complete all as specified and directed.

Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F 150 mm dia(6") PVC pipe of working pressure of 4 kg/cm2 single socketed in any length and joining pipes with adhesive solution in laid in trenches or in floors including demolition and breaking up existing pipes of any type complete all as specified and directed.

S&F 200 mm dia(8") PVC pipe of working pressure of 4 kg/cm2 single socketed in any length and joining pipes with adhesive solution in laid in trenches or in floors including demolition and breaking up existing pipes of any type complete all as specified and directed.

S&F 300 mm dia(10") PVC pipe of working pressure of 4 kg/cm2 single socketed in any length and joining pipes with adhesive solution in laid in trenches or in floors including demolition and breaking up existing pipes of any typecomplete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 300mm dia pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains, 100mm bore and less, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specicfied and directed.

Cutting into existing manholes for connecting new drains, 150mm and above all bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specicfied and directed.

Site Clearance including of prepairing the surfaces by cleaning of vegetation ,debris, broken bricks, demolished concrete waste, soils of any type by any means and removing the same out of MD land and levelling the surface and complete all as specicfied and directed.

M&L for hard core of broken bricks of gauge nexc 63mm deposited and spread and levelled in layers nexc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for Cement concrete type D 2, 1:4:8 (using 40 mm graded graded stone aggregate) as in sub base of flooring/ hard standing in Backside of Bldg of Kehtrapal Vihar & Old MES Colony and Zone B incl of prepairing the surfaces by cleaning of vegetation, debris, broken bricks, demolished concrete waste,soils of any type by any means and removing the same out of MD land and levelling the surface complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons. Laid bedded and pointed in any mortar etc complete all as specified and directed.

Supply and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L Chequered cement concrete tiles 25 cm X25 cm X 25 mm thick over 15 mm thick bedding of CM 1:6 in floors ,set,jointed and pointed in neat cement slurry with gray cement and pigment complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15cm thick below or above ground level complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 as in flooring and complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 as in flooring and complete all as specified and directed.

M&L Pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate ) kerb Stone ,setting in CM 1:4 and complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) tiles oof size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match and complete all incl dismantling of tiles including cement morter bedding complete all as specified and directed.

S&F 110 mm bore PVC RWP pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps incl taking down old unserviceable pipe of any type complete all as specified and directed.

S&F 110mm dia PVC bend any radius including benching of bends provided at ground surface in PCC 1:3:6 complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps incl taking down old unserviceable pipe of any type complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F, PVC Nahani trap 75mm bore with grating including jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Description all as per item No 54.00 above but for except traps complete all as specified and directed.

Treatment of sunken floor slab compraises of the following specifications and complete all as specified and directed.:- (i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting & WPC will be measured and paid separately). (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and direced. (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured and paid separately) (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-1 all round after painting with anticorrosive paint. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debries obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, ccomplete all as specicfied and directed.

S&F in repair Vitreous China wash down water closet pan (pedestalpattern), white (excludingfixing bolts, flushing cistern and flush pipe) but including pedastal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..complete and Seat and cover for pedestal pan complete all as specicfied and directed.

S&F in repair fancy type chromium plated Angle valves, two way, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specicfied and directed.

S&F in repair, PVC flushing cistern 10 Litres capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete including complete all as specicfied and directed.

Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as specicfied and directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specicfied and directed.

Taking up or down for 25 or 32mm bore steel water tubing galvanised with connection complete all as specicfied and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 20mm outer dia CPVC SDR 11 fittings in wall/ceiling complete all as specicfied and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 25 mm outer dia CPVC SDR 11 fittings in wall/ceiling complete all as specicfied and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 32 mm outer dia CPVC SDR 11 fittings in wall/ceiling complete all as specicfied and directed.

S&F Brass Elbow for special fitting of 20 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 25 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 25 mm outer bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 20mm outer bore CPVC pipe complete all as specified and directed.

Please Enable Macros to View BoQ information