Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹5.4 L+₹34,000 (6.67%)Rejected-AOC | L2 | Rejected-AOC Reject | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | GKS ENGINEERS L1 | Mohit Kumar Contractor L2 |
|---|---|---|---|---|---|
| 1.00 | Removal of old SS Sleeve from existing line shaft, supply and fitting of new Shaft Sleeve of 150 Cs VT pump. | 1 | No. | 43,200 ₹43,200 Lowest | 48,200 ₹48,200 |
| 2.00 | Removal of old SS Sleeve from existing small shaft, supply and fitting of new Shaft Sleeve of 150 Cs VT pump. | 1 | No. | 43,200 ₹43,200 Lowest | 48,200 ₹48,200 |
| 3.00 | Removal of old GM gland bush from stuffing box & supply & fitting of new GM gland bush in the existing stuffing box of 150Cs pump. | 1 | No. | 50,500 ₹50,500 Lowest | 55,000 ₹55,000 |
| 4.00 | Insertion of new rubber bush in diffuser (02 No.) of 150 Cspump as per existing size of bush in Flowmore make pump. | 2 | No. | 24,000 ₹48,000 Lowest | 24,800 ₹49,600 |
| 5.00 | Insertion of new rubber bush in bell-mouth of 150 Cspump as per existing size of bush in Flowmore make pump | 1 | No. | 24,000 ₹24,000 Lowest | 24,800 ₹24,800 |
| 6.00 | Insertion of new rubber bush in Spider of 150 Cspump as per existing size of bush in Flowmore make pump | 1 | No. | 24,000 ₹24,000 Lowest | 24,800 ₹24,800 |
| 7.00 | Repairing of impeller shaft, line shaft, coupler by re-metalling on damaged portion including turning & balancing work of 150cs pump | 1 | Job | 29,900 ₹29,900 Lowest | 35,600 ₹35,600 |
| 8.00 | Dynamic balancing of 150cs Impeller | 1 | Job | 27,000 ₹27,000 Lowest | 27,600 ₹27,600 |
| 9.00 | Providing and Fixing by making required size/length at site in pair of MS cross Girder (ISMB) of size 500mmX200mm for foundation of 150Cs VT axial flow pump including supply, fixing & welding on bottom side of ISMB throughout length with MS flat of 200mmX25mm thick, one end of ISMB shall be grouted into wall by making arrangement of PCC block of suitable size as per weight of pump set 150cs capacity and other end shall be welded with fixing of L- bracket and nut/bolts/washers etc into existing ISMB member. Including material and labour for applying primer coat with ready mixed paint ( Epoxy paint) for metallic surface in all shades on new steel or iron work. Taking down by cutting/ welding the existing rusted/damaged old foundation girder for fixing new girder at site. Make: TATA/JINDAL/SAIL/VIZAG | 1 | Job | 2,05,000 ₹2,05,000 Lowest | 2,15,000 ₹2,15,000 |
| 10.00 | Credit of old Iron scrap (Actual weight of old scrap will be measured by the committee)
Old scrap/parts shall be property of firm. | 700 | Kg. | 20 ₹14,000 Lowest | 20 ₹14,000 Lowest |
Tender Value
₹4.3 L
EMD Value
₹8,540
Closing Date
29 Sept 2025, 3:00 pmClosed
XEN M/GARH W.S MECH. DIVISION, NARNAUL
Executive Engineer M/Garh W/S Mech. Division, Narnaul, Pin. 123001
Re-E-Tender Repair of 01 No. 150 Cs. VT Axial Flow Pumps (P-9 Sr. No. 16112760) at Pump Houses MC-5 of MGarh Canal in MGarh W.S. Mech. Division, Narnaul
2025_HRY_473445_1
5327-40/9-A Dated 18/09/2025
Open Tender
Pumps/Motors
Works
60 days
XEN M/GARH W.S MECH. DIVISION, NARNAUL
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
₹8,540
Yes
25 Nov 2025
19 Sept 2025
30 Sept 2025
19 Sept 2025
29 Sept 2025
19 Sept 2025
Amount
Removal of old SS Sleeve from existing line shaft, supply and fitting of new Shaft Sleeve of 150 Cs VT pump.
Removal of old SS Sleeve from existing small shaft, supply and fitting of new Shaft Sleeve of 150 Cs VT pump.
Removal of old GM gland bush from stuffing box & supply & fitting of new GM gland bush in the existing stuffing box of 150Cs pump.
Insertion of new rubber bush in diffuser (02 No.) of 150 Cspump as per existing size of bush in Flowmore make pump.
Insertion of new rubber bush in bell-mouth of 150 Cspump as per existing size of bush in Flowmore make pump
Insertion of new rubber bush in Spider of 150 Cspump as per existing size of bush in Flowmore make pump
Repairing of impeller shaft, line shaft, coupler by re-metalling on damaged portion including turning & balancing work of 150cs pump
Dynamic balancing of 150cs Impeller
Providing and Fixing by making required size/length at site in pair of MS cross Girder (ISMB) of size 500mmX200mm for foundation of 150Cs VT axial flow pump including supply, fixing & welding on bottom side of ISMB throughout length with MS flat of 200mmX25mm thick, one end of ISMB shall be grouted into wall by making arrangement of PCC block of suitable size as per weight of pump set 150cs capacity and other end shall be welded with fixing of L- bracket and nut/bolts/washers etc into existing ISMB member. Including material and labour for applying primer coat with ready mixed paint ( Epoxy paint) for metallic surface in all shades on new steel or iron work. Taking down by cutting/ welding the existing rusted/damaged old foundation girder for fixing new girder at site. Make: TATA/JINDAL/SAIL/VIZAG
Credit of old Iron scrap (Actual weight of old scrap will be measured by the committee) Old scrap/parts shall be property of firm.
Credit of old GM scrap (Actual weight of old scrap will be measured by the committee) Old scrap/parts shall be property of firm.
Mohit Kumar Contractor (BID ID -1341758)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .