Provision of 6 x attach toilets at JCOs living of 3 Punjab at Anarwala, boundary wall and fencing near FOL group at 447 coy ASC (Sup) Type G, Parking shed for Nos 30 Scooter with over head shed and hardstanding near bldg P-232 of 414 Fd Hosp, 10x car

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type of soil complete all as specified and as directed.

Excavation in any type of soil as in post holes each not exc 0.5 cum & getting out, returning filling in and ramming earth in layers not exc 25cm thick, watering making good surfaces and removal of surplus soil to a distance not exc 50 mtr complete all as specified and directed.

M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in column footing including raft footings, foundation, plinth beam, bases of columns etc. complete all as specified and as directed.

M & L RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in columns, pillars, posts and struts etc. complete all as specified and as directed.

M & L RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in beam, cantilevers, lintel chajjas etc. complete all as specified and as directed.

M&L for RCC Type A-1, 1:1.5:3 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L RCC Type A1 (1:1.5:3) (20 mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified.

M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of fair finished surfaces complete all as specified and as directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions shape rectangular or polygonal for fair finished surfaces of concrete Square, complete all as specified and directed.

S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S & F mild steel TMT bar 6 to 8 mm dia as cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per item No 13 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Brickwork with Fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed .

M&L Brickwork with fly ash bricks in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

M&L for providing damp proof course 40 mm thick in cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces mixed with integral water proofing compound as per manufacturere instructions including necessary formwork complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid seperately.

M&L Formwork for fair finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and openingcomplete all as specified.

M&L Formwork for fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L Formwork square, rectangular or ploygonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4), finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth without using extra cement complete all as specified and as directed .

M&L for preparing of new surfaces of walls and applying two coats of cement base over a coat of suitable primer paint, complete all as specified and as directed by Engr-in-Charge.

M & L applying two coats of cement base paint over a coat of cement primer on old plastered surfaces of wall complete all as specified.

M&L for preparing new plastered surfaces and applying 3 coats of white wash on walls complete all as specified and as directed .

M&L, preparation of new plastered/un plastered surfaces and providing two coats of OBD as in walls over a coat of suitable primer complete all as specified and directed.

M & L for moorum / red bajari filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering and duly consolidating complete all as specified and directed.

M&L for hardcore of broken stone / boulders of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces complete all as specified and as directed.

M&L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base etc complete all as specified and as directed by the Engr-in-Charge.

M&L for cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) 25 mm thick as in floor/ sub floor finish complete all as specified and as directed .

M&L PCC 1:3:6 type C2 using 40 cmm graded stone aggregate as in foundation filling concrete of fencing post complete all as specified.

M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying of floor finish complete all as specified and as directed.

M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match complete all as specified.

M&L for coloured digital ceramic tiles in vertical surface as in walls, dado, etc of size 300 x 450 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed.

S&F powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old window/ventilator and making good of wall surface to match with existing surface complete all as specified and directed : - Frame : 44.5 x 44.5 mm x 1.80 mm thick Middle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading.

S&F powder coated aluminium grill with frame as per approved design/ pattern with stainless steel screws to frame etc complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge. Make : ECHON/Kumar Tech/Sintex.

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity by Engr-in-Charge. Make : ECHON/Kumar Tech/Sintex.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 125 mm long Aluminium anodised handles of fabricated type complete all as specified and as directed by Engr-in-Charge.

S & F Butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engr-in-Charge.

S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy & fixed and compete all as specified and directed.

S & F for mild steel framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

M & L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth incl preparation of surfaces complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

M & L cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including 600 mm long CI P-trap, connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and as directed by Engr-in-Charge.

S & F 10 litres capacity PVC low level valve less syphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed by Engr-in-Charge.

S&F PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete all as specified and directed.

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified.

Supply & fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size complete all as specified.

S&F 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F Vitreous China wash hand basin, white, flat back type of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, grating dome, etc including fixing of tap, waste fitting etc complete. Note: Pillar tap shall be measured as supply only under respective item.

S&F 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and as directed by Engr-in-Charge.

S & F brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified.

S & F 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S & F Chromium Plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.

S & F brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

S&F brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

M & L PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete all as specified.

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall for 75 mm dia bore of pipe complete all as specified.

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall for 110 mm dia bore of pipe complete all as specified.

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 75 mm dia pipe.

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe.

S & F 110 mm dia PVC (SWR) vent cowl complete. Make : Supreme/finolex or as approved.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality-A all as specified and directed

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F in replacement pre-painted galvalume aluminum zinc coating GI based valley gutter of 0.50 mm thick sheet any colour having fixed with self tapping screws complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws including dismantling of old asbestos sheet complete all as specified and as directed

Returning filling in soil including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engr-in-Charge.

Removing excavated material (Soil) n.exe 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base etc complete all as specified and as directed by the Engr-in-Charge.

M&L for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified.

Demolition of PCC of any description and in any position otherwise specifically provided for complete all as specified.

Supply only integral waterproofing compound complete as per manufacturer instructions.

S&F 150mm internal dia salt glazed stoneware drain pipe Gde 'A', laid in trenches and jointed in cement & sand mortar 1:1, complete all as specified and directed.

M&L for concrete in PCC 1:3:6 type C-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:4 complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of Schedule 'A').

M&L for construction of brick, masonry septic tank 25 users capacity, including excavation of in any type of soil complete all as specified and shown on TD drawing & directed.

M&L for construction of soakage well, internal dia 2.40 mtr x 3 mtr effective depth including excavation in any type of soil complete all as specified and shown on TD drawing & directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivrting , etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. ( Each line wire to be measured) complete all as specified and directed.

S&F 75 mm dia UPVC rain water pipe confirming to latest IS13592 (Type "A") single socketed, in any length fixed in RCC wall for weep holes complete all as specified and directed.

S & F 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete Make :Supreme/Finolex/Astral

S & F UPVC (SWR) bend, 110 mm bore' complete all as specified. : Make :Supreme/Finolex/Astral

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 as in frame work for sun shade, roof projection etc. complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm long (05 to 10 mm dia of neck) complete all as specified and directed

M & L sand filling under floors or in foundations including spreading & levelling and well ramming in layer n exc 25 cm thick complete all as specified directed.

M & L for machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment over well rammed sand filling complete all as specified and directed. Note: Sand filling shall be measured and paid separately under respective item of sch.

Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O long complete all as specified and as directed.

S&F 8 mm thick Plates (plain or chequred channels, squares cut or notched (ordinary and counter sunk forming holes, without any attachment complete all as specified and directed

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

S& F 4 mm thick 'E' board in false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 2 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick all a specified, and directed ..

Taking Down & refixing the same (light, fan, switch / socket or power socket) including fiitings and fixtures complete with making good disturbed surfaces of walls, floors, ceiling etc complete all as spfd and directed

Supply and fix electric water heater, storage type steel body with glazed line SS inner tank and efficiant long life heating element upto 2 KW, Capacity 25 litre, Shock -resistance ABS outer body,tank design suitable to with stand 8 bar pressure complete with all accessories such as safety valve, thermostate, NRV, nylon braided PVC flexible connection pipes,15 mmdia,450 mm long with check nut & washers for Hot Cold water, fire retardent 3 core copper cable ,ISI Marked complete fixing with suitable size of fixing arrangement all as specified and directed by Engr -in -charge Make : Recold model no CDR 25V/equivalent in Bajaj /Havells

Supply and fixing for Distribution Box MCB Protected Socket with sheet steel enclosure 20 A MCB DBOXX Combo DP including PLUG TOP all as specified & directed. Make : Havells/LEGRAND/L&T

S&F MCB ,SP,25 Amp,10 KA,B-Siries,230V accomodated in Existing DB with suitable lugs all as specified & directed.

S&F stop cock 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F CP bib tap cast copper alloy with crutch handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light point controlled by one way switch.

One ceiling fan / exhaust fan point , controlled by one way switch through Regulaor

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

S & Fix for Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & Fix for Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete.

Supply and fix for Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified. Make HPL/Havells/Anchor

S & Fix for Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting complete all as specified. Make HPL/Havells/Anchor

S&F wall mounted LED tube light fitting 1x10 nwatts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge. Make : CG cat LBHP-10-CDL/Philips WT140W LED7S CW PSU S1 PC/Havells ENDURA RUGBYNEO N /Mepro cat no BCL 23 Plain

S&F exhaust fan,steel body AC single phase ,230 V of size 300mm sweep ,1400 RPM,1300CMM,70 watt with , blades, and frame and louvers complete all as specified. make :CG model MAXX AIR sku code 70046 or equivalent in Havells/Bajaj

Supply and fixing of Busbar chamber of size 600x315x214 mm or higher size with PVC hinged lid suitable for and mounting arrangement for fixing of MCCB 4 pole, 100/125 Amps 25 KA (Icu=100%Ics) 415 Volt,50 Hz, duly connected with and incl 04 Nos of copper Busbar 300 Amps fixed on epoxy insulators, Gun metal cable gland of 25 Sqmm 01 No and PVC coupler for sub main wires 04 Nos complete Polycarbonate type (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, flame retardant,complete all as directed at site by Engr in charge or his rep complete. Note:- Only MCCB shall be measured and paid for seperately. All other items incl connection from MCCB to busbar with suitable size copper wire incl thimble, bottle lugs etc are included in the quoted rate of item. Make:- Hensel cat No Mi 9410 or ABB/BCH/Universal/Schneider

Supply and fixing for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make Make:- Legrand/Hager/L&T

Supply and fix MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

S&Fix MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS complete all as specified and directed.

S&Fix MCB SPN 240 Volt 10 KA 32 Amp 'C' series conforming to IS complete all as specified & directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion, complete all as specified and directed.

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 16 sqmm x 4 core including lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge.

M&L for sand cushioning in trenches for protection of UG cable with river based sand laid dry in trenches before and after laying of cable, incl well ramming complete all as specified and directed

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

Supply & Laying in replacement of GI Steel tubing light grade 40 mm dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed by Engr-in-charge.