Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.6 L
EMD Value
₹3,200
Closing Date
16 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LCA Tejas Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED LCA Tejas Division, Bangalore
Renovation to Office of AGM EQ and FH at LCA Tejas Division.
7115
HAL/LCA-Tejas/PM/C-06/2024
Works
Bangalore Complex-LCA-PG
₹0
₹3,200
16 May 2024
25 Apr 2024
25 Apr 2024
16 May 2024
Name of the individual/ Firm/ Company: *Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration
Address for Correspondence
PAN No.:
Service Tax Registration No.
Goods and service Tax ID No.
Contact Details
Registered Contractor
Related Document to be uploaded to HAL e Portal.
I.T Returns for past 03 Years (Assessment Years)
Related Document to be uploaded to HAL e Portal.
Average Annual Financial Turnover during the last 3 years, ending 31st March 2023 of the previous financial year[should not be less than 30% of Amount put to tender]
TURNOVER IN Rs.
Audited Report duly certified by the Auditor to be enclosed to support the Turnover.
ESI & PF Nos. with proof
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be uploaded to HAL e Portal( Cancelled cheque leaf to uploaded).
Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .
Related Document to be uploaded to HAL e Portal.
Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.
Type of work: [Incase of private works the same shall be supported with TDS certifcate]
Please Enter Details for Work No I.
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No II.
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No III.
Details of person holding the Power of Attorney ( if different from the contact person)
Related Document to be uploaded to HAL e Portal.
Documents Need to Uploaded
Related Document to be uploaded to HAL e Portal.
DECLARATION I
DECLARATION II
Related Document to be uploaded to HAL e Portal.
DESCRIPTION
Painting old plastered interior surfaces with two coats of low VOC less than 50grams / litre, premium plastic emulsion with acrylic base conforming to IS 15489, of approved make, colour, shade, tint & pattern at all levels, over a coat of approved alkali resistant primer including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even with white cement putty or Plaster of Paris, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:2:4) with 20 mm and down graded aggregates for concealing PVC pipes, in copings, cills, string courses, hold fasts for doors and the like at all levels including necessary formwork, weathering, rounding or chamfering and throating, mixing, transporting, consolidation, levelling, curing, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20 mm nominal outer dia Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) as directed by Engineer-in-Charge.
Providing, applying and laying cement mortar (1:4) plastering 15 mm thick on brick/concrete surfaces, finished even and smooth with trowel for internal walls etc., with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge.
Supplying and laying granite 20 mm thick (Table rubbed and polished) in washbasin counters, cooking platforms, storage counters, shelves and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite, cutting for sink/wash basin, chasing & fixing to the wall in CC 1:2:4, round nosing of edges etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning sinks of size 610 mm x 460 mm and min. bowl depth 200 mm conforming to IS 13983, made of stainless steel 304 grade , supported on suitable brackets including bedding in cement mortar to dwarf wall or including fixing cantilever brackets, connecting union to pipe, connecting to floor trap, painting bracket with two coats of synthetic enamel paint over a coat of approved primer etc. with all necessary fittings and accessories like rubber plug with CP brass chain, 50 mm CP brass waste fitting, nuts, washers etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing C.P. brass long body bib cock/Sink tap, 15 mm nominal bore, of approved quality conforming to IS standards and weighing not less than 690 gms all complete as directed by the Engineer-in-Charge.
Supplying, jointing, testing and commissioning, approved make 20mm dia GM body gate valves with screwed ends etc. complete all as directed by the Engineer-in-Charge.
Supplying, jointing, testing and commissioning, approved make 15mm dia Stop cock etc. complete all as directed by the Engineer-in-Charge.
Providing and laying Vitrified tiles in floor with sizes of 600mm x 600mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness or more as per site requirement, including grouting of joints , removal of exisitng PVC flooring, surface preperation, cleaning surfaces, etc., all complete as directed by the Engineer-in-Charge.
Supplying and Painting with synthetic enamel paint of approved brand and manufacture of required colour on old wooden surfaces to give an even shade including preperation of surfaces and filling the crevises, etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning 75mm dia PVC pipes conforming to IS : 13592 Type A and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, on walls, including all necessary clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing on wall face unplasticised - PVC moulded 75mm bend for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing on wall face unplasticised - PVC moulded 75mm door bend for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing uplasticised PVC connection pipe, 15mm dia and 450mm long, with brass unions etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing flexible 32mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning PVC (SWR grade) floor trap with 75 mm dia outlet of approved make, including connection with PVC soil / waste pipe, providing SS cockroach free floor grating with cup, cutting and making good the floors if required, etc., all complete as directed by the Engineer-in-Charge.
Total (Exclusive of GST)
Percentage above or below for total value on Sl.No. 19
Total amount after Percentage Sl.No. 19 + Sl.No. 20
GST @ 18% for total value on Sl.No. 21
Total amount (Inclusive of GST) Sl.No. 21 + Sl.No. 22
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
06_NIT_RENOVATION_OF_AGM_EQ_OFFICE1.pdf
TENDER_DOCUMENT • 0.09 MB
06_TD_RENOVATION_OF_AGM_EQ_OFFICE1.pdf
TENDER_DOCUMENT • 1.78 MB
06_PQ_RENOVATION_OF_AGM_EQ_OFFICE.pdf
TENDER_DOCUMENT • 0.01 MB
06_PB_RENOVATION_OF_AGM_EQ_OFFICE.pdf
TENDER_DOCUMENT • 0.29 MB
06_PQ_RENOVATION_OF_AGM_EQ_OFFICE_BID.xlsm
TENDER_DOCUMENT • 0.01 MB
06_PB_RENOVATION_OF_AGM_EQ_OFFICE_BID.xlsm
TENDER_DOCUMENT • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .