SPECIAL REPAIR TO BLDG NO. ET-205 (OR GUEST ROOM) AT CME, PUNE

Amount

Dismantling of single layer Mangalore Pattern roof tile laid dry complete all as specified and directed

All as per item No.1 above, but bedded in lime or cement mortar complete all, as specified and directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spacing exc 15 cm complete all as specified and directed.

S&F Framed work such as roof trussed (framed), trussed purlins, crane gantries , rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed.,

S&F rolled sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.

M & L preparation new or previously untreated steel Surface of any description, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over of red oxide zinc chrome primer complete all as specified and directed

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side laps, fixed with 'L' hook or 'J' hook bolts in roofs walls etc with grade of zinc coating 275 including dismantling and complete all as specified and directed.

S&F 0.63mm thick plain galvanised mild steel sheeting in ridges, hips, valley, gutters, drips and straight flashings(length and girth as fixed) with grade of zinc coating 275 including dismantling and complete all as specified and directed.

M&L for roof tiles, Mangalore Pattern, interlocking at side joints laid dry complete all as specified and directed.

M&L for ridge tiles, Mangalore Pattern of roof tiles, set and jointed in CM 1:6 complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete all as specified and directed.

Dismantling boarding, any description in any position with nails complete all as specified and directed.

M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M&L for preparing the surfaces of wood and wood based materials new or old of any description and girth noth otherwise described and treated with two coats of cresote oil complete all as specified and directed

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing to store and rubbish to premises complete all as specified and directed.

M&L non skid ceramic coloured tile 7 to 8mm thick(square/rectangular) area of each tiles exceeing 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Ditto as per item No. 16 above, but in skirting over 10mm thick CM 1:4 backing layer complete all as specified and directed.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeing 0.06 sqm but not exceeding 0.11 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

S&F Glazed ceramic coloured tiles in vertical surface of size 350x250x7mm thick including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 20 mm thick granite work over and including 15 mm thick cement mortar (1:4) (table rubbed and polished) in steps,jamps,pillars,window cills,cooking platforms and like in cement mortar (1:4)including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L complete removal of existing treatment and applying two coat oil bound distemper on wall over a wall care putty complete all as specified and as directed. (Note:- wall care putty paid on item no. 20)

M&L 3mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparation of old wooden surface over 10cm girth or width and applying one coat of synthetic enamel paint all as specified and directed.

M&L preparation of old surface of steel of any description , over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc. all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches and complete all as specified and directed by Engineer-in Charge.

S & F 110 mm dia PVC (SWR) bends any radius, provided with access door complete all as specified and directed by Engineer-in Charge.

S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed by Engineer-in Charge.

S & F 75 mm dia PVC (SWR) bends any radius provided with access door complete all as specified and directed by Engineer-in Charge.

S&F in repair vitreous china wash basin , white , flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling complete all as specified and directed.

S & F in repair pillar tap with 450mm long braided hose chrome finish (Make - Jaquar )

S&F in repairs brass chromium Angular stop cock with wall flange of 15mm dia capstan head (make - Jaquar) all as specified and directed.

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 550X440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including trap set in and including concrete, making good to floor complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.

S & F in repair Bib cock 2 in one complete as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S& F in repair Soap dish holder complete as specified and directed by Engr-in-Charge. (Make- Jaquar)

S & F in repair Single Towel Rail 600mm long complete as specified and directed by Engr-in-Charge. (Make- Jaquar)

S&F in repair 15mm fancy type Sink Cock, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m. Make: Nirali/Diamond/Blue King/Kingston/

S & F three track sliding window with two or more shutter with 4 mm thick plain glass or Toughen glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make including taking down existing old window with frame of any description complete all as specified and directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old ventilator with frame of any description complete all as sspecified and directed. (a) SP 20048 (b) Glazing clips 19352

S&F in repairs PVC flexible waste down pipe 32mm dia with full thread coupling and washers complete all as specified and directed by Engineer-in Charge.

Dismantling of wall and ceiling boards (fibre pulp, insulation etc ) or insulation board/slabs/blanket, any thickness including cover fillets all as specified and directed.

M & L for SG Gypoc T-Grid false ceiling system with 12mm thick Panel laminated with PVC film on face side and metalised polyster film on the back with all four edges sealed with PVC film ceiling tiles including all necessary ancillaries and fixing arrengement as per manufacture instructions in the grid size 600x600 mm with consisting of Main Tee on wall of size 38mm x 24 x 0.3mm, Cross Tee of size 25mm 24mm x 0.3mm, wall angle of size 20mm x 14mm x 0.4mm using purpose made members interlocking to each other and with level clips and making holes etc all as specified and directed. Make - Gyproc (Gyprex), Armstrong & Equvalent.

Excavation in trenches n.exc 1.50m wide and 1.50m depth for foundation, man hole and sewage line etc and getting out in any type of soil complete as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 (using 40mm gde stone agg) as in foundation and mass concrete complete as specified and directed by Engr-in-Charge.

M&L for RCC drain pipes 150mm , class NP-3 laid in trenches and jointed complete with collar all as specified complete as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 (40mm gde stone agg) as in concrete bed to RCC drain pipes including packing under and haunching against side of pipes with concrete after they are laid and jointed, dia of pipe 150mm complete as specified and directed by Engr-in-Charge.

M&L precast solid block masonry of block in cement concrete1:3:6 type C-1 using 20mm graded stone aggregate wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on concrete surface or other than fair face of brick work incl finishing even and smooth without using extra cement complete as specified and directed by Engr-in-Charge.

M&L plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregates, as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, including provn of form work if required as directed.

Returning , filling in, includidng spreading , levelling , watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete as specified and directed by Engr-in-Charge.

Removing excavated material (soil) not.exceeding 50m and deposited where directed at a level not.exceeding 1.5 m above the starting point complete as specified and directed by Engr-in-Charge.

M & L MS TMT Bars 8mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Reinforcement Cement concrete type B0 (1:2:4) using 12.50 mm grade stone aggregate as in cover slab for drain & manholes etc. as directed incl use and waste of necessary form work complete all as specified and directed.

M&L cement concrete 1:2:4 type B-2,(using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc.

M&L for point wiring for ligh/fan with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.00 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch all as specified and directed & Making good to disturbed surface of wall etc

One light point controlled by one switch 5 Amp

One Fan/ Exhaust fan point controlled by one switch

Socket outlet, three pin, 5 Amp, independent

Socket outlet, three pin 5 Amps on the same board

All as per Item No. 61 above, but with stranded copper conductor 2.5 Sq. mm (nominal area), including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

Ceiling rose, surface Bakelite suitable for 3 pin 230 volt 50 Hz AC supply complete all as specified and directed

Switch piano; flush type, single pole, one way, and 5 Amp, 230 volt complete all as specified and directed

Switch piano; flush type, single pole, one way, and 15 Amp, 230 volt complete all as specified and directed.

Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified and directed.

Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and directed

Supply and fix step fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply

Supply and fixing bell push flush type , 5 amps , 240 volts all as specified and directed.

Supply and fixing Bell AC, 230 volts single pole all as specified and directed.

Supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaires, high efficiency diffuser for soft glare free light of capacity 20 watt suitabe of operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. Make : Cat Part No ENDURALINEARNEOBS20W LED865SPCWH of Havells or equivalent model in Wipro/CG/Bajaj.

13. Supply and fix Security light LED fittings capacity 25 Watts, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded in PCC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 and necessary fixing arrengements i.e pipe mounting GI bracket bent in shape not exceeding 1.5 mtr in length made out of 40 mm dia GI pipe complete all as specified and directed by Engineer-in-charge. (Make- Havells item description ENDURAPEARLSL25WLED757SASYTOPCMP or same type in all respect of Wipro/Bajaj)

Supply and fix exhaust fan AC single phase 230/ 240 volts of size 250 mm sweep, 1400 rpm, with louvers and all fixing arrangements such as plywood 18mm thick of suitable size all as specified and directed.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt all as specified and directed.

Supply and fix sheet metal enclosures TPN DB 4 way 415 volts double door all as specified and directed.

17. Supply & fix MCB 4 Pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed

S&F Sub main wiring with approved colour coding as per IS with Two single core PVC insulated cable with stranded copper conductor of size 04 Sq. mm nominal area and drawing into PVC conduit including PVC insulated 04 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE : Two runs of 04 sqmm cable, one run of 04 sqmm earth cable and one run of PVC conduit will be measured as one unit

Supply & fix DB 6 way SPN with 200 amps rated bus bar, double door including wooden box suitable size. Make - Indoasian /Schneider/Siemens

Supply and fixing of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 10 KA C series. Make - Indoasian /Schneider/Siemens

Supply and fixing of MCB Single pole and neutral rating capacity 40 to 63 Amp, 240 V breaking capacity 9KA C series. Make - Indoasian /Schneider/Siemens

M & L for Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth of not less than 1.50 metre below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc.

M & L for bituminous road cutting to a width of 45 cm and depth 50 cm for laying LT UG cables and making good with cement concrete 1:3:6 type C 1 (using 20 mm graded stone aggregate)

Supply , laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured , electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl using suitable clamp of cross sectional area 3.5 core 25 Sqmm in and including taking out old one all as specified and directed.

Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 77 mm and inner dia 63 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable incl couplers & bends complete all as specified and directed.

Supplying and laying GI tubing light grade of size 40mm dia bore for encasing cables for mechanical protection , laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed by Engr-in-charge.

GGS Infra

Aishwarya Constructions

Sunrise Traders

Mukund Engineers and Contractors