CITHostel_2024

Amount

Dismantling the Reinforced Cement Concrete deploying machineries with carefully stacking material useful for reuse etc., complete complying with standard specification and as directed by the departmental officers.

Dismantling the Plain Cement Concrete with carefully stacking material useful for reuse etc., complete complying with standard specification and as directed by the departmental officers.

Dismantling the brick work in Cement Mortar with carefully stacking material useful for reuse etc., complete complying with standard specification and as directed by the departmental officers.

Dismantling the doors and windows with carefully stacking material useful for reuse etc., complete complying with standard specification and as directed by the departmental officers.

Installation of Vertical Bored cast in situ RCC piles in all types of soils, using Ready Mix Concrete of M30 grade, with sulphate resistant Cement, fine aggregate, 20mm and down graded HBGS jelly coarse aggregate. The rate includes cost of reinforcing steel, binding wire, fabrication, welding charges, placing of reinforcement cage in bore hole in correct position, cost of boring to the required depth with Bentonite solution with temprory casing of required length, conveyance of RMC to site and pouring concrete using Tremie pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavation of mud pits for circulation of Bentonite solution, closing the mud pits to original level and mud removal with initial lead and lift but including dismandeling the concrete above the cut off level etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing should be as per clause 15.2.2. The length of pile for payment shall be measured up to natural ground level. The work should be carried out as per IS 2911. Pile depth should be decided by the departmental office at site.

450 Dia Pile

500 Dia Pile

Installation charges inclusive of transportation to site and spiceal assembling the bored pile equipment employed for the works including setting up pile boring equipments with all accesaries and tools at each of the pile location based on the sequense of operation approved by the departmental engineers, in respect of the location and distance involved in movements of pile boring equipment for all sizes of piles and dismantaling for bored pile equipment etc.complete

Initial Load Test as per IS 2911 Part IV 1985 including cost of single pile (250% of pile capacity), labour, reinforcement charges and all other incidential charges including excavation, shoring, strutting, dewatering etc. as necessary hire charges for jacks, measuring devices, Structural Frame work for platform, Kent ledges etc, as required and providing pile cap.

Routine load test as per IS2911 part IV 1995 (150% of pile capacity including labour charges and all other material charges including hire charges for jacks, measuring devices,structural frame work for platform kent ledges etc,as required etc.complete

Earthwork Open excavation in all soils and sub soils to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, baling out water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 15 cm thick layers well rammed and depositing the surplus earth within compound in places shown by the departmental officers with an initial lead of 10 metre and initial lift of 2 metre and clearing and leveling the site etc., complete complying with standard specification and as directed by the departmental officers.

Earthwork excavation for foundation in all soils and sub soils to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, baling out water wherever necessary, refilling the foundation with excavated earth and depositing the surplus earth within compound in places shown by the departmental officers with an initial lead of 10 metre and initial lift of 2 metre and clearing and leveling the site etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and Filling in foundation and basement with filling M sand in layers of not more than 15cm thick well rammed watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers.

Filling the foundation basement with Excavated earth in layers of not more than 15cm thick well rammed, watered and consolidated as directed by the deptl. officers. Complete complying with standard specifications.

Supplying and Filling in foundation and basement with gravel in layers of not more than 15cm thick well rammed watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers.

Cement concrete 1:5:10 (one cement, five M sand and ten aggregate) using 40mm gauge hard broken blue granite stone jelly for foundation and basement including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) For column footing plinth beam etc.

Supplying and erecting steel centering including necessary supports for plane surfaces, for all RCC works including strutting upto 3.29m in all floors using mild steel shutters of size 90cmx60cm of BG 10 stiffened with mild steel angles of size 25mmx 25mmx3mm laid over silver oak (Country wood) Joists of size 10cmx6.5cm spaced at about 90cm c/c and supported by casurina props of 10cm to 13cm dia. (spaced at 75cm c/c) etc., complete complying with standard specification and as directed by the departmental officers. (The centering will be removed after specified period of concrete without damaging the concrete)

For plane surface such as RCC floor slab, roof slab, beam litels bed blocks, landing slab, waist slabs and beams, etc.,

For plane surface such as rectangular or square RCC columns, sunshdes, top and bottom slab of RCC, etc.,

For plane surface such as Vertical surfaces such as sunshade, boxing vertical drops, facia for sunshade and other vertical walls etc.,

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accardance with IS 456-2000 using 20mm and down graded Hard broken Granite stone jelly for all RCC items of works with minimum cement content of 400 Kg/m3 and maximum water cement ratio of 0.45, including admixture ( plastciser/ super plasticiser ) in recommanded proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability withiut impairing strength and durability with about ( 5.0 cu.m ) 7730 Kg. of 20mm machine crushed stone jelly and with about ( 3.30 cu.m) 5156 Kg. of 10-12mm machine crushed stone jelly with about ( 4.79 cu. m) 7670 Kg. of M sand, but cxcluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with machanical vibrators, finishing,curing etc; and providing fixures like fan clamps in RCC floor/roof slab wher ever necessary without claiming extra, etc., complete complying with standard specifications and as directed by the Departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. ( No separate payment will be made by the Department for the excess usage of materials)

For Foundation and Basement

For Ground Floor up to 4.50 M height

For First Floor up to 4.50 M height

For Second Floor upto 4.50m height

For Third Floor

For Fourth Floor upto 4.50m height

For Fifth Floor upto 4.50m height

For Sixth Floor

For Seventh Floor

Cement Concrete 1:3:6 (One cement, three M sand and six aggregate) using 40mm gauge hard broken granite stone jelly for dummy columns,excluding cost of centering, shuttering, reinforcement grill fabrication charges but including consolidating as per standard specification, finishing, curing etc., complete complying with standard specification and as directed by the departmental officer.(Cement concrete 1:2:4 for slabs to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in cement concrete 1:3:6 Dummy column should be atleast in 1m height) For seventh floor

Supplying, fabricating and placing in position of steel reinforcement using MS (or) RTS rods for all RCC item of works including cost of steel and binding wire in all floors etc., complete complying with standard specification and as directed by the departmental officers.

Brick work in cement mortar 1:6 (one cement and six M sand) using Fly Ash bricks of size 230×110×70mm including curing etc., complete complying with standard specification and as directed by the department officers. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost).

For Foundation and Basement

For super structure Ground floor

For super structure First floor

For super structure Second floor

For Third Floor

For Fourth Floor

For Fifth Floor

For Sixth Floor

For Seventh Floor

Brick work partition wall 11.10 cm thick using Fly Ash bricks of size 230×110×70mm in cement mortar 1:3 (One cement and three M sand including fixing hoop iron reinforcement if found necessary, laying, finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.

For super structure Ground floor

For super structure First floor

For super structure Second floor

For super structure Third floor

For super structure Fourth floor

For super structure Fifth floor

In Sixth Floor

Supplying and applying of two coats of putty of 3mm thick over the walls and ceilings including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out if dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered( water proof abrasive sheet) to give asmooth and even surface. Any unevenness shall be made good by applying ist coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering the same after it is dry and finishing the surface smoothly etc., complete complying with standard specification and as directed by the departmental officers. The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper cost of putty blade, labour charges for grinding the joints and sand pepering, two coats of putty, scrapping the putty area to level the surface smooth etc., complete. The putty should be got approved by the executive engineer before use on work.

Special ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three P-sand) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5 (one cement and five p-sand) 12mm thick in all floors using fine P sand including neat finishing, curing, etc., complete complying with standard specification and as directed by the department officers.

Plastering with cement mortar 1:3 (one cement and three sand) 12mm thick with WPC 2% by weight of cement used in all floors using fine P sand including neat finishing, curing, etc., complete complying with standard specification and as directed by the department officers.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Providing the texture finish to the newly plastered wall with ready made texture putty with patterns at all levels including the cost of coating, labour charges and other incidental charges etc.,complete as directed by the departmental officers

Brick Jelly Lime Concrete of 1:2:5 (One Lime,Two M Sand and Five Brick jelly ) with 20 mm hand broken brick jelly for Sunken portions including dewatering wherever necessary and laid in layers of not more than 15cm thick, well rammed, consolidated and curing etc. complete complying with standard specification.

Weathering course using best quality of broken brick jelly of 20mm gauge in pure slacked lime (no sand to be added) the proportion of brick jelly to lime being 32:12.5 Cft. by volume and laid over the RCC roof slab in a single layer and consolidated to the required design and finished thickness and slope by beating the concrete with wooden beater of approved pattern and keeping the surface constantly wet by sprinkling lime jaggery water etc., complete complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of Machine pressed tiles of size 23×23×2cm of approved quality laid in cement mortar 1:3 (One cement and three M-sand) 12mm thick mixed with water proofing compound (confirming to Indian standard specification) 2% by weight of cement used and pointed with the same mortar including mixing of red oxide and water proofing compound etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best approved of ISI quality of following PVC rain water down fall pipes having a working pressure of 4 kg / sq.cm including cost of necessary PVC shoe, PVC bend, C.I. gratings of required dia. and special clamps, brass screws, nails etc., and fixing of cast iron gratings at juction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cost of removable iron grating. The PVC pipe shall be fixed on wall with special type of clamps. Special type "U" clamp at the centre of the pipe line shall be fixed in addition to those for more than 3.0M pipe length complying with standard specification.

110mm dia pipe

Paving the floor with Tactile paver type of new tack BT yellow colour ceramic tiles of approved quality and colour of size 305 x 305 x 15mm in all floors over a base layer of cement mortar 1:3 (one cement and three M sand) 20mm thick and pointing with white cement using 0.30kg/m2 including adding suitable colour pigments to suit the colour of tiles finishing perfectly and curing etc., including cost of tiles, all materials and incidential charges, transportation charges and labour charges for laying tiles etc., complete complying with standard specification and as directed by the departmental officers . (The tiles should be got approved by the departmental officers before use on works).

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet Black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing wall cladding with granite tile of size 2'0" x 1'0" in wall surface using CM 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with cement concrete Hydraulically pressed Anti skid tiles 20mm thick in all floors set in cement mortar 1:3 (One cement and three M sand), 20mm thick and pointing with the cement including adding suitable colouring pigments of match with colour of tiles and finishing and curing as directed by the departmental officers including cost of tiles, and all other materials, transportation charges and labour charges for laying of tiles as directed by the departmental officers complete complying with standard specification. (The tiles should be got approved by the departmental officers before use on work.)

Paving the floor with Stain free nano polished vitrified tiles (like Marbonite or equivalent) of approved quality and colour of size 600 x 600x 8 mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three M sand) 20mm thick and pointing with white cement using 0.30kg/m2 including adding suitable colour pigments to suit the colour of tiles finishing perfectly and curing etc., including cost of tiles, all materials and incidential charges, transportation charges and labour charges for laying tiles etc., complete complying with standard specification and as directed by the Departmental officers. (The tiles should be got approved by the Departmental officers before use on works).

Paving the floor with colour design ceramic tiles of approved quality and colour of size 305 x 305 x 6mm in all floors over a base layer of cement mortar 1:3 (one cement and three M sand) 20mm thick and pointing with white cement using 0.30kg/m2 including adding suitable colour pigments to suit the colour of tiles finishing perfectly and curing etc., including cost of tiles, all materials and incidential charges, transportation charges and labour charges for laying tiles etc., complete complying with standard specification and as directed by the departmental officers . (The tiles should be got approved by the departmental officers before use on works).

Dadooing the walls with colour design glazed tiles of size 300mmx 200mmx 6mm of approved quality in all floors set in cement mortar 1:2 mix (one cement & two M-sand) 10mm thick and pointing with white cement using 0.4 kg/m2 including adding suitablee colour pigments to suit the colour of tiles including finishing the joints neatly and curing etc.,complete complaying with standard specifications. (The tiles should be got approved by departmental officers before use on the work).

Supplying and fixing of PVC corner beeding of best approved quality and colour standard size and thickness of required height of walls using cement mortar 1:2 (One cement and two sand) and finishing the surface smooth with ceramic tiles etc., complete complying with standard specification and as directed by the departmetal officers.

Supplying and fixing ornamental Brass-in-lay Burma Teak Wood Entrance Door with a size of 9.30 m x 2.85m with six leaves as per the drawing and design as approved by the departmental officers. The clear opening of each door shall be of 2.00m. The outer frames are of finished size 175mm x 125mm.The Each door shall have two leaves of 1/3 paneled and 2/3 glazed. The Outer frame of the shutter of finished size of 150mm x 50mm.All the Panels shall be of finished 50mm thick. The main outer frame, shutter frame and panels shall be engraved with computer design ornamental carving works of approved pattern with skilled carpenter as directed by departmental officers. All the glazing works shall be done with design painting works. Necessary grill protection arrangements shall be made for the glass portion. The door frame and shutters shall given two coats of best and approved quality of high Glossy Polyurethane finish. The rate includes cost of best and approved quality of Burma Teak wood, design painted glass, Brass hinges, Tower bolts, Aldrop, locking arrangments, ornamental handles, brass screws and labour charges, transportation charges, all taxes, etc., complete.

Supplying and fixing of Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1 mm thick) of size 100 mm x 60 mm with a rebate of 30 / 35 mm x 15 mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc., complete complying with standard specification and as directed by the departmetal officers.

Supplying and fixing in postion of 35mm thick solid core flush door shutters with following specification. with TW ply on both sides and with TW lipping of size 35x12mm on all edges with necessary adhesives and C.P. Screws Alu. Butt Hinges (6 nos. 250 x 16 mm Size) Alu. Aldrop1 No. 250 x 16 mm Size, Alu. Tower Bolt 2 No. 250 x12 mm size, alu. Tower Bolt 2 No. 200 x 12 mm size, D type alu. Handle 200mm length 2 No., alu. door stopper with rubber bush 2 No. shall be provided, as directed by the departmental officers etc., complete.

Single Leaves

Double Leaves

Supply and Fixing of M.S. steel doors with Single Leaves following specification. MS angles of size 40x40x 6mm at 3.5 kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60 kg/m for the shutter frames. Stiffners with 32x6mm at 1.50 Kg/m. MS flat is provided as the lock rail of the door and welded infact of both ends to the shutter frame, 18 gauge CR sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50 Kg / RM and MS flat on the rear side of the door sandwitching the CR sheet for rigidity with locking rail and bottom tie arrangements. Additional stiffners with 18x5 mm at 0.7 kg/m MS flats are provided horizontally diagonally on the rear side of the shutter. 2Nos of hinges in case of single leaf and 4Nos of hinges in case double leaf shutter is provided 6 Nos of hold fasts 200 length 40x40x6mm M.S. angle spliced at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. one at top and the other at bottom are provided. One aldrop is provided incase of double leaves door at lock rail section in the door. For single leaf doors, one more aldrop is provided in the inner side at the lock rail section of the door.

One rotating locking arrangements at the inner side of the door and additional provision for locking arrangements for lock is provided with 32x6mm MS flat on the rear side of the door at an appropriate place incase of a double leaves door MS flat 32x6mm at 1.50 kg/m is provided on the edge of one shutter to conceal the gap between the shutters. A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing. All members are given a shop coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials labour charges transportation taxes and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officer

Supplying and fixing 30mm thick Solid Core WPC Door Shutter with WPV frame of size 50 x 45mm with suitable rebate for housing the shutter (conforming to IS 4020 with updated amendment) consisting of frame made out of MS tubes 19 gauge thickness and size of 19 x 19mm for styles and 15 x 15mm for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded PVC ‘C' channel of size 30 x 50mm forming styles, and 75 x 50mm for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail. Paneling of 5mm thick PVC sheet bearing on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the ‘C' channel using PVC sealant adhesive including cost of all furniture fittings such as aluminium aldrop of size 250 x 16mm-1 No., aluminium tower bolt 250 x 12mm-1 No., aluminium 'D' type handle 200mm-1 No., etc., complete, as directed by Departmental Engineer and drawing.

Supplying and fixing of PVC Sliding Door with Roller using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC B993 Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing Cup-board Shutter with frame using termite / waterproof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Supplying and fixing of fine Cuddapah slab of 38 / 40 mm thick for Cup - board arrangements in brick wall including levelling to correct alignment etc complete complying with standard specification and as directed by departmental officers

Supplying and fixing MS grills to doors, windows and ventilators etc. using necessary MS flats (or) square rods for inner members and outer members which should be fixed to window frames as directed and design given by the departmental officers inclusive of cost of providing one coat of best quality red oxide primer etc., complete complying with standard specification and as directed by the departmental officers .

Painting the new iron work with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer. (The quality and colour of paint should be got approved by the departmental officer before use on work).

Painting the new wood work two coats with best approved first quality and colour of synthetic enamel paint over a priming coat of approved quality in all floors including cost of paint, labour and other materials like brushes, putty and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers. (The make quality and colour of paint should be got approved by the departmental officer before use on work).

Providing mixing laying polymer based water proofing treatment for the sunkan toilet by applying cement based fiexable WPC conforming to IS 2645 to a thickness of 1mm of the prepared surface of the roof slab / floor slab as per specification mendioned above providing cm 1:3 water proofing cover plaster to a thickness 12mm. The malaime coating with admixture of approved make rate quoted is inclusive of preparation of surface which including cleaning of surface polymer morter, curing, labour, tools equipments etc., rate inclusive of cement and sand required for the treatment the coat and labour charges for fixing 25mm dia pressure pipe 15 kg / m2 to length of 45 cm for drip pipe etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Drilling of Borewells in any where in Tamil Nadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the departmental officer including construction of mud pit. Upto 60m depth

Reaming 140/150mm dia pilot bore to 350mm dia bore as directed by the departmental officers, etc complete complying with standard specification and as directed by the departmental officers. Drilling borewell 140/150mm dia. Upto 60m depth

Supplying of PVC casing pipe As per IS 12818/1992 CM (casing medium depth) inclusive of all taxes, duties and transportation charges etc complete complying with standard specification and as directed by the departmental officers.

150mm CM (Medium depth)

150mm RS (Slotted pipe)

Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete and supply and packing the annular space with pebbles of size and quality as approved by Executive Engineer.

Supply of suitable PVC End cap of best approved quality having pressure of 6 kg/sq.cm. etc. complete as directed by the departmental officers. The pipe should be got approved by the Executive Engineer before use on works. PVC end cap 110mm

Bore cap using M.S Flat of size 1cm x 3mm and M.S sheet on top with bolting arrangements for securing the cap in position etc complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of approved quality best variety of Heavy duty PVC column pipe for Submersible Pumpset etc complete complying with standard specification and as directed by the departmental officers. 2" UPVC Heavy duty pipe.

Supplying and fixing of 3 x 6 sq.mm PVC insulated and sheated 3 core flat type copper cable confirming to IS 694/1990 etc., complete complying with standard specifications and as directed by the departmental officers. .

Supplying and tying of Nylon rope of 18mm dia thread make with best quality for holding submersible pump etc., complete as directed by the Executive Engineer. The Rope should be got approved by the Executive Engineer before use on works.

Supplying, fixing and Erecting in position of Kirlosker coupled 3 phase 2 H.P Submersible Pump with 3 phase Panel Board - D.O.L Starter including Labour Charges and Transport charges etc., complete complying with standard specifications and as directed by the departmental officers. .

Supplying and fixing of following diameter of Stainless steel pipe Nipple set for HDPE pipes of good approved quality and with both end portion is threaded for usage of joining purpose etc., complete complying with standard specification and as directed by the departmental officers.

Supply & laying of 2x 6 Sq.mm PVC armoured LTUG cable etc., complete complying with standard specification and as directed by the departmental officers.

Providing and fixing stainless steel handrail made out of 50.80mm dia stainless steel tube of 1.60mm thick at required locations to a height of 1000mm from finished floor level welded to 38.10mm dia stainless steel tube post of 1.60mm thick as verticals at 1m centre to centre with 3 Nos of 25.40mm dia horizontal stainless tubes of 1.60mm thick in between finished floor level to top in required spacing as directed (as per details shown in drawing). The rate shall include for the grouting into concrete with necessary supporting arrangements of handrail verticals and in floor, welding the baseup of the post into slab reinforcement, polishing, buffing and protecting the hand rail surface etc., complete complying with standard specification and as directed by the departmental officers.

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs,UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. For External Water supply arrangements. (Above Ground Level)

50mm dia UPVC pipe

40mm dia UPVC pipe

32mm dia UPVC pipe

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs,UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. For Internal Water supply arrangements. (Above Ground Level)

25mm dia UPVC pipe

20mm dia UPVC pipe

Supplying and fixing in position UPVC specials such as plain bend and shoe of various sizes of best approved quality conforming to ISS.and providing leak proof joints including fixing to wall and giving connection to the UPVC. Pipes including,dismantling the brick masonry/RCC.floor or roof slab and redoing the disturbed portion to original condition etc.complete as directed by the Deptl.Officers complete complying with standard specification

20mm dia UPVC Union

25mm dia UPVC Union

32mm dia UPVC Union

40mm dia UPVC Union

50mm dia UPVC Union

20mm dia UPVC Elbow

25mm dia UPVC Elbow

32mm dia UPVC Elbow

40mm dia UPVC Elbow

50mm dia UPVC Elbow

20mm dia UPVC Tee

25mm dia UPVC Tee

32mm dia UPVC Tee

32mm x 25mm reducer TEE

25mm x 20mm reducer TEE

20mm x 15mm reducer

Supplying and fixing in position best quality and approved variety of new Gun Metal Gate Valve / Wheel Valve heavy type excluding the fixing charges but including necessary cutting & threading of GI pipes for jointing the GI specials and providing two coats of painting with good quality and approved variety of anti-corrosive paint over a coat of red oxid primer coat in the case of pipe line above ground level and one coat of tarring in the case of pipe line below ground level etc complete complying with standard specification and as directed by the departmental officers.

50mm dia Gate Valve

40mmdia Gate Valve

32mm dia Gate Valve

25mm dia Gate Valve

20mm dia Gate Valve

Supplying and fixing in position 15mm dia Chromium Plated screw down Taps (heavy type) of best quality and approved make conforming to ISS and providing leak proof joints with thread and shellac etc., including fixing and connecting to the pipes etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the departmental officer before use on work)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand of size 600x450mm x5.5mm thick with necessary plastic back, PVC frame with bottom stand of approved colour with brass screws, rawal plugs etc. complete complying with standard specification and as directed by the departmental officers. (The materials should be got approved by the departmental officers before use on works)

Supplying and fixing in position Indian water closet oriya type of size 580x440mm white glazed earthernware of approved quality with 'P" trap or 'S' trap conforming to IS 2556-Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to PVC. pipes by dismantling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specification and as directed by the departmental officers.(The Oriya type Water Closet and all accessories should be got approved by the departmental officers before use on work)

Supplying and fixing in position White Glazed European water closet of best quality and approved make with 100mm P or S trap with double flapped rigid PVC.seat cover with chromium plate brass hinges, including supplying and fixing PVC. Low level flushing tank 10 litre capacity of approved quality on wall with teak wood plugs, brass screws and 2 numbers 15mm dia gun metal wheel valve, 15mm dia nylon connection and giving necessary water supply connection as directed by the departmental officers. The rate includes cost of 100mm dia PVC.Pipe 60cm long including cost of 3 Kg.of white cement 6Kg.of cement, spunyarn, shellac, thread ball, teak wood plugs, brass screws 75mmx10mm etc., complete complying with standard specification and as directed by the departmental officers. (The European Water Closet and flushing tank should be got approved by the Departmental Officers before use on work.)

Supplying and fixing in position best quality of approved make white glazed earthernware wash hand basin (without pedestal) of size 550x400mm with a pair of cast iron brackets , including cost of 15mm diametre brass chromium plated pillar tap, 32mm diametre C.P.waste, 32mm diametre PVC waste pipe with rubber plug and chain, 15mm diametre gun metal wheel valve, 15mm dia brass nipple, 15mm dia nylon connection etc. including fixing the wash hand basin in the wall in position with pair of C.I.brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anti-corrosive paint including testing for leakage etc., complete complying with standard specification and as directed by the departmental officers.(The wash hand basin and specials should be got approved by the departmental officers before use on work)

Supplying and fixing Stainless steel health faucet of best quality with control valve etc., complete complying with standard specification and as directed by the departmental officers (The materials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position of Indian make white glazed earthen ware lipped mouth flat back Urinal of best approved quality with 32mm dia bell mouthed PVC connection,15mm dia G.M wheel valve,fixing the Urinal to the wall in position with necessary T.W. plugs,clamps,screws shellac etc.,including dismantling masonry if necessary and redoing the same to original condition,fixing the 15mm GI pipe connection and wheel valve, painting the pipe with two coats and checked without any leakage etc., complete complying with standard specification and as directed by the departmental officers.(The urinal should be got approved by the departmental officers before use on work)

Supplying and fixing in position PVC Nahini trap of size 110x75mm with best pvc gratings of approved brand and quality with fixed over a bed of brick jelly lime concrete 1:2:5(one part of lime,two parts of sand and five parts of 40mm size brick jelly)and finished with cement Mortar 1:3(one cement and three sand)including dismantling masonry works wherever found necessary and making good the damaged portions to the original condition giving connections to the pipe etc., complete complying with standard specification and as directed by the departmental officers. (The PVC Nahini trap with grating should be got approved by the departmental officer before use on works).

Supply and fixing in position best quality PVC Soil/ waste pipes 6 kg / sqcm of various size (Below Ground Level) laid properly to alignment including cutting and fixing the required PVC specials but excluding the cost of such specials etc., complete.. (The PVC pipes shall be got approved by the Executive Engineer before use on works).having ISI mark and providing leak proof joints, complying with standard specification etc complete complying with standard specification and as directed by the departmental officers.

160 mm Dia PVC Pipe

110 mm Dia PVC Pipe

75 mm Dia PVC Pipe

Supplying and fixing in position of the following PVC specials best approved quality conforming to ISS and providing leak proof joints with PVC adhesive etc., i and giving connections to the PVC pipe etc., complete complying with standard specification.(The PVC specials should be got approved by the departmental officer before use on works).

75 mm dia Tee with door

75mm bend

110mm dia Y with double door

110mm PVC Tee

75 mm dia Y

75 mm dia cowl

110 mm dia pvc cowl

Supplying and laying of 63 mm thick high strength type of interlocking rubber moulded hydraulic pressed paver block of approved colour made up of designed concrete mix 1:1:2 using 10 to 12mm size HBG stone jelly in required shapes and sizes having minimum compressive strength of 40 N/mm2 to be laid in flurrying bone pattern with approved non sticking surface at top. The rate is inclusive of levelling the site, compacting with power compactor and sweeping the sand grouting and also inclusive of transportation charges, loading, unloading and labour charges for laying the paver block, etc. complete and as directed by the departmental officers

Construction of Inspection chamber of following size with the following description. The earth work excavation to a size of 1.20 x 1.20 x 1.05m, sand filling for 10cm thick, cement concrete 1:5:10 for 15cm thick using 40mm gauge HBGS jelly, walls in brick work in cement mortar 1:3 (One cement three sand) using country bricks of size 9" x 4 3/8" x 2 3/4" plastering with cement mortar 1:3 (One cement three sand) 12mm thick and the bottom is finished with cement concrete 1:3:6 (One cement three sand and six aggregate) using 20mm brick jelly etc., complete complying with standard specification and as directed by the departmental officers.

Manhole chamber for a clear size of 600x600mm

Manhole chamber for a clear size of 750x750mm

Manhole chamber for a clear size of 900x900mm

Manhole chamber for a clear size of 1200x12000mm

Supplying, fixing and Erecting in position of coupled 3 phase 5 H.P Submersible Pump with 3 phase Panel Board - D.O.L Starter including Labour Charges and Transport charges etc., complete complying with standard specification.

Labour charges for erection of Motor Pump set in bore well/ open well including fixing and jointing submersible cable with proper clamps up to starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventer, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days.

Providing Anti – termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 part I to IV in stage to suit the progress of work consist as per the detailed specification as below (Measurements taken for the plinth area for the purpose of payment) including braking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport & storing etc., complete and as directed by the departmental officers.(The chemical should be got approved by Executive Engineer before use on work). Stage -1 : Spraying Anti –termite chemical solution for the foundation before laying concrete, in bottom and sides of foundation. Stage-2 : Spraying Anti –termite chemical solution to the grade beam level, spraying has to done for to grade beam brick masonry contact with the back fill earth. Stage-3 : Spraying Anti –termite chemical solution on the sand for the flooring before laying the flooring concrete. This treatment has to be carried out and sand filling by making holes with crow bar to a depth of 60cms and at 60cms intervals on both direction and at junction of wall and flooring throughout. Stage -4 : Spraying Anti –termite chemical solution alround building outside by making holes with crow bar before laying plinth protection and the holes to be close after the treatment. etc., complete complying with standard specification and as directed by the departmental officer.

Supply ,installation ,Testing and Commissioning of Terrace Booster Pump Starter panel with DOL starters for the booster pump and complete with auto/manual switch, , indication lamps, enclosure being vermin & dust proof (IP65), push buttons, etc complete complying with standard specification and as directed by the departmental officers.

Supply, Laying, Testing and Commissioning of the following size PVC insulated 1.1KV grade FRLS Aluminium / Copper conductor armoured Cable etc complete complying with standard specification and as directed by the departmental officers.

4 Core 10 Sq.mm XLPE Copper Armoured FRLS Cable

2 Core 1.5 Sq.mm PVC Copper Armoured FRLS Cable

Supply and laying of 8 gauge bare copper wires for panel earthing, pump earths and other equipment body earthing as required etc complete complying with standard specification and as directed by the departmental officers.

Supply & erection of pressure switch operating range 0-15 kg/cm2 (1 No.), snipers, ball valves, pipes and fittings etc complete complying with standard specification and as directed by the departmental officers.

Supply and erection of Glycerene filled Dial Type Pressure gauges complete with ball valve, valve mounting, fittings and copper tubing extension where required etc complete complying with standard specification and as directed by the departmental officers.

Supply & installation of 25 NB Automatic Air Release Valve along with ball valve etc complete complying with standard specification and as directed by the departmental officers.

Supplying, installing, testing and commissioning of MS Pipes, ERW confirming to IS 1239 Pt - I Heavy grade (Class-C) with painting, suitable type of supports, anchor fasteners, bolts nuts , clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Fittings upto 50mm size shall be socket welded fittings and above 50mm pipe size to be Butt weldable MS ERW Fittings .Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete.Painting shall be 1 coat of red oxide primer and 2 coat of synthetic enamel paint etc complete complying with standard specification and as directed by the departmental officers.

100mm nominal Dia

25mm Nominal Dia

Supplying, Installing, testing and commissioning Gate Valve Non- rising type with required flanges, nuts, bolts etc. complete complying with standard specification and as directed by the departmental officers. 100mm nominal dia

Supply ,installation,testing and commissioning of 100mm dia Cast Iron body Non-return valve including necessary flanges, nut, bolts & washers, painting, etc. complete as required etc complete complying with standard specification and as directed by the departmental officers. .

Supply and installation of 100mm dia C.I Body Y strainer with necessary flanges, nut, bolts & washers, painting, etc. complete as required etc complete complying with standard specification and as directed by the departmental officers.

Supplying and installation of 25mm Gate valves with fittings of screwed end end type with necessary accessories complete as required etc complete complying with standard specification and as directed by the departmental officers..

Supply, Installation, testing & Commissioning of First aid Hose reel drum of 180° swinging type with 25mm dia Rubber braided hose of 36m length with Ball Valve and 6.5mm diameter Shut off nozzle, complete. The hose reel shall conforming to IS 884 etc complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing approved make of 20mm dia air release valve complete with unions or flanges etc complete complying with standard specification and as directed by the departmental officers.

Supply ,installation,Testing and Commissioning of 2way fire brigade inlet with inbuilt NRV and complete with required accessoriesetc complete complying with standard specification and as directed by the departmental officers.

Supply and Fixing of MS Structural supports for pipes in on walls /columns with 1 coat of red oxide primer and two coat of black paint etc complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) powder type fire extinguisher of 6 kg capacity as per IS:15683with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc. including conveyance, all incidential charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc. complete as per standard specification and as directed by the Departmental Officers. Make: Excellent/Safety First/equivalent.

Supply and fixing of carbon-di-oxide gas type 2 kg. capacity Fire extinguisher as per new IS:15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc. including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc. complete as per standard specification and as directed by the Departmental Officers. Make: Excellent/Safety First/equivalent.

Providing and fixxing Fire buckets -4Nos round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket .Rate inclusive of MS fabricated Fire Bucket Stand etc. complete as per standard specification and as directed by the Departmental Officers.

Supply, Installation, Testing and Commissioning of Conventional Manual call point with Back Box etc. complete as per standard specification and as directed by the Departmental Officers.

Supply, Installation, Testing and Commissioning of Conventional Hooter with Back Box etc. complete as per standard specification and as directed by the Departmental Officers..

Supply, Installation, Testing and Commissioning of Conventional 8 Zone Fire Alarm Panel with battery back up, power supply.The fire alarm panel battery to be provided with the power back up of 24 hrs for normal operation and 90 minutes for alarm operation etc. complete as per standard specification and as directed by the Departmental Officers..

Supply, Installation, Testing and Commissioning of 2 core x 1.5 sq.mm FRLS cable with Including necessary end terminations with copper lugs, junction box, crimping identification tags at each end etc. complete as per standard specification and as directed by the Departmental Officers.

Supply, Installation, Testing and Commissioning of 25mm PVC Conduits on wall/ceiling/floor etc.complete with accessories like junction boxes,collars,bends etc. complete as per standard specification and as directed by the Departmental Officers.

Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher. Size 6" x 8" etc. complete as per standard specification and as directed by the Departmental Officers.

Providing and fixing in position the signage of " Fire Hydrant & Hose Reel " to be pasted on door of the every fire shaft at all floors. Size 6" x 8" etc. complete as per standard specification and as directed by the Departmental Officers.

Providing and fixing in position the sign board of " ASSEMBLY POINT " complete with 1 mm thick rigid plastic board size of 400 mm x 300 mm to be fixed on ground by using a steel rod / pipe at designated places etc. complete as per standard specification and as directed by the Departmental Officers.

Providing and fixing in position the sign boad of " EXIT " with arrow to be placed at walking pathways by hanging on ceiling to direct occupants to outside the building in an emergency. The exit sign board will be auto glow photoluminiscent type which will glow at dark etc. complete as per standard specification and as directed by the Departmental Officers..

Providing and Fixing A3 Size Fire Evacuation Map with required acrylic sheet and Studs etc. complete as per standard specification and as directed by the Departmental Officers.

Steam generating boiler LPG operated M.S. outer body of 8mm thick M.S. 8mm inner body, steam circulation pipe, Water circulation pipe, boiler mounting like water level indicator, pressure gauge, safety valve, automatic float valve, emergency water inlet, smoke chimney arc weled smooth finishing with heat resistant painting with T-78 Double burner with 150 kg pressure per hour etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. Rice Cooker 25kgs capacity single Jacketed direct steam injection S.S. Body of 16 gauge salem sheet 304 grade, S.S. vessel rotating shaft of 60mm dia of 304 grade, S.S. Vessel seating plate 6mm thick S.S. Vessel mounting frame of 50mm sq. Tube 14 gauge thick of 304 grade S.S. lid of 16 gauge S.S. Handle of 25mm Rod with heat resistant knobs argon arc welded with mat polish etc., and as directed by the departmental officers.

S.S. Milk Cooker of 150trs capacity Double jacketed indirect steam injection S.S. body of 14 gauge salem sheet 304 grade of double jacket, S.S. vessel rotating shaft of 60mm dia of 304 grade, vessel mounting frame of 50mm sq. tube 16 gauge thick of 304 grade S.S. Lid of 16 gauge S.S. Handle of 25mm Rod with Heat resistant knobs argon welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. Iddly Cooker of 240 Iddlies Capacity S.S. Outer body of 18 gauge salem sheet 304 grade, S.S. Front Frame and Door of gauge, S.S. inner chamber of 18 gauge Each chamber of 80 Iddies capacity, S.S. Idly tray of 20 gauge of 20 Iddies Capacity S.S. Drip tray 22 gauge salem sheet 304 grade with spare tray. S.S. inner connecting pipe with push type cock Handle with knobs S.S. Stand of 32’3mm ‘L’ angle, S.S. standing pipe and support pipe of 304 grade argon arc welded with matt polish with 2 Nos Spare plate etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. single burner Gas Range Size 27”x27”x24” M.S. Inner angle frame of 32x6mm thick S.S. Top of 16 gauge salem sheet S.S. Side cover Sheet of 18 gauge S.S. Leg of 40 OD with Nylon leveling bush cast iron pan support, T-65 Burner, Copper pig tail, Needle control valve etc. Argon arc welded with Mat polish etc., and as directed by the departmental officers.

S.S.Double burner Gas Range Size 60'x30'24' M.S. Inner angle frame of 32x6mm thick S.S. Top of 16 gauge salem sheet S.S. Side cover Sheet of 18 gauge S.S. Leg of 40 OD with Nylon leveling bush cast iron pan support, T-65 Burner, Copper pig tail, Needle control valve etc. Argon arc welded with Mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. Wet Grinder Box Type 12 Ltrs capacity Heavy Duty S.S. Drum of 20 gauge sheet S.S. body of 20 gauge S.S. Arm Set, S.S. Arm set pillar of 304 grade base frame of M.S. 50*6mm L-angle hard granite stone hardened gear box Compton motor or equivalent make argon arc welded with mirror polish with coconut scrapper etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. Wet Grinder Box Type 8 Ltrs capacity Heavy Duty S.S. Drum of 20 gauge sheet S.S. body of 20 gauge S.S. Arm Set, S.S. Arm set pillar of 304 grade base frame of M.S. 50*6mm L-angle hard granite stone hardened gear box Compton motor or equivalent make argon arc welded with mirror polish with coconut scrapper etc. complete as per standard specification and as directed by the Departmental Officers.

S.S Working table with under shelves size 45”x24”x34” S.S. Top of 16 gauge and under shelves of 18 gauge salem sheet 304 grade S.S. standing pipe of 40mm pipe of 16 gauge 304 grade with Nylon bush argon arc welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

Providing Dosa plate of size 72”x 36” X 34” as per the following specification. The Dosa plate top is made of 20mm MS plate cut neatly on all sides & grounded to smoothness. The legs are made of 40x40x6m with stiffeners of size 35x35x5m MS Angles. The base plate for legs are made of 6mm plate. MS flats of size 32x6, 32x3 & 40x6mm are used for connection clamps & stiffeners 25x25x6mm MS angle is provided on all four sides for draining of oil & water. The burner is covered on all sides with 3mm sheet to a height of 0.20m to guard the flame in the burner. All members are given a coat of anticorrosive paint over which two coats of syntatic enamel paint is given. The cost includes cost of all materials, labour charges, transport, erection at site, etc. complete as per standard specification and as directed by the Departmental Officers.

S.S.Vessel with lid Size Dia 20” Height 14: S S Body of 16 gauge S.S bottom of 14 gauge bottom S.S lid of 16 gauge food graded of 304 grade hedge folded with 12mm rod, S.S. handle of 16 mm rod 304 argon arc welded with mirror polish etc. complete as per standard specification and as directed by the Departmental Officers..

S.S.Vessel with lid Size Dia 27” Height 12: S S Body of 16 gauge S.S bottom of 14 gauge bottom S.S lid of 16 gauge food graded of 304 grade hedge folded with 12mm rod, S.S. handle of 16 mm rod 304 argon arc welded with mirror polish etc. complete as per standard specification and as directed by the Departmental Officers..

S.S.Vessel with lid Size Dia 30” Height 12: S S Body of 16 gauge S.S bottom of 14 gauge bottom S.S lid of 16 gauge food graded of 304 grade hedge folded with 12mm rod, S.S. handle of 16 mm rod 304 argon arc welded with mirror polish etc. complete as per standard specification and as directed by the Departmental Officers..

S.S.Storage rack size 72” X 24” X 60 there in one of 16 gauge salem sheet 304 grade with vertical pipe 0f 40mm 16 gauge with adequate stiffness argon arc welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

S.S.Storage rack size 60” X 24” X 60 there in one of 16 gauge salem sheet 304 grade with vertical pipe 0f 40mm 16 gauge with adequate stiffness argon arc welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

M.S. Steam pipe line with cladding main line of 1” 2.5mm thick schedule pipe sub line of ¾” of 2.5mm thick TATA make or equivalent pipe, flange, ‘L’ bow, Bolt and nut etc. S.S. Ball valve Agon arc welded smooth – finishing with asbestos rope insulation to avoid heat loss etc. complete as per standard specification and as directed by the Departmental Officers.

LPG pipe line 4”x2” manifold of TATA or equivalent make with forged fitting S.S. shenco ball value, cooper pipe, Hose with adaptor and regulator VANAZ or equivalent make wall clamping cost of material including labour charges etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. waste food box trolley size 24”x24”32” S.S. top of 18 gauge 304 grade S.S. four sides cover and bottom of 20 gauge salem sheet 304 grade top 12” dia hole wih plastic bucket and 4 nos wheel argon arc welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. three sink unit 72"x27"x34", S.S. top of 16 gauge salem sheet 304 grade rear side splash of 200mm height, S.S. sink size 21"x18"x12" S.S. sink corner will be radius end, S.S. inner 40*3mm 'L' - angle frame, S.S. standing pipe Of 40mm, S.S. cross support pipe of 25mm of 16 gauge 304 grade with 1 1/2" BSP Drain pipe and drain ball valve nylon levelling bush with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

S.S Food service trolley size 60"x30"x12" of 2mm thick salem sheet 304 grade S.S. handle with 4 Nos, wheel 2 Nos, swivel, 2 Nos.Fixed argon arc welded with mat finish etc. complete as per standard specification and as directed by the Departmental Officers.

S.S Exhaust hood size 72" x 36"x18 gauge salem sheet 304 grade dust oil collection pipe etc., and as direced by the departmental officers. M.S Exhaust blower centrifugal type of impeller on direct motor of 5HP, Three phase, 1440 RPM of 3mm sheet arc welded with smooth finishing with painting etc., and as directed byu the departmental officers.G.IU. Duct for Exhaust system of 22 gauge sheet with flanges bolt and nut etc., with fising charges 20 feet support "L" Angle frame hood handing bolt and nut erection etc. complete as per standard specification and as directed by the Departmental Officers..

S.S. Exhaust hood oil filter with 16 gauge of outer section etc., and as directed by the departmental officers etc. complete as per standard specification and as directed by the Departmental Officers..

S.S. Drain canal grating Removable type grating size width 350mm, length 600mm S.S. flat in vertical position outer frame and internal with gap of 6" of 25*6mm thick of 304 grade, S.S. 6mm rod of 304 grade mounted on 32*6mm thick L-Angle 304 grade argon arc welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

Eight persons dinning table size 92”x32”x30” S.S. Top of 20 gauge sheet 304 grade with inner 12mm plywood M.S., frame of 4”x2” rectangle tube of 14 gauge, M.S. Standing frame of 16 gauge, rotating arm of 2”*1” rectangle tube of gauge, S.S. Sent top of 20 gauge 13” Dia arc welded smooth finishing black color powder coated with nylon leveling bush argon arc welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

S.S. Bain Marie size 84”x26”x34”12” S.S. top of 16 gauge 304 grade SS side sheet and front sheet of 18 gauge 304 grade, S.S. inner tank of 18 gauge with water immersion heating, element 3KW with thermostat control, rotary witch L&T or equivalent make with indicator lamp, S.S> gastro norm container vessel of 150mm deep full size pan 3Nos, half size pan six S.S. Bottom shelf of 18 gauge with adequate stiffness 304 grade Argon arc welded with Mat polish etc., and as directed by the departmental officers. inner 12mm plywood M.S., frame of 4”x2” rectangle tube of 14 gauge, M.S. Standing frame of 16 gauge, rotating arm of 2”*1” rectangle tube of gauge, S.S. Sent top of 20 gauge 13” Dia arc welded smooth finishing black color powder coated with nylon leveling bush argon arc welded with mat polish etc. complete as per standard specification and as directed by the Departmental Officers.

Supplying & Fixing of G.N. Pans size 1/1 etc., complete and a directed by the dept etc. complete as per standard specification and as directed by the Departmental Officers etc. complete as per standard specification and as directed by the Departmental Officers.

Tea can of 15 litres capacity of approved make and qulaity made of Stainless Steel complying with IS specification etc. complete as per standard specification and as directed by the Departmental Officers.

Floor doughing machine 10 Kgs capacity with stainless steel drum SS arm complete with guard etc. complete as per standard specification and as directed by the Departmental Officers.

Industrial Mixie of following capacity of approved make and quality complying with IS specifications etc. complete as per standard specification and as directed by the Departmental Officers.

Supplying and fixing stainless steel trough 304 grade in inner size 2.50mx0.45x0.45m depth with a border width of 50mm alround including folding the edges with a provision of stainless steel splash board of 600 mm height including cost of 4 Nos. of 15mm diameter brass chromium plated tap, 32mm diameter C.P. waste union, 32mm dametre P.V.C. waste pipe with C.P. waste coupling, waste pipe, etc including fixing the trough in the wall in position with a pair of C.I. brackets and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc., complete complying with standard specifications, (the stainless steel trough and specials should be got approved by the Executive Engineer before use on works) complete as per directed by the departmental officers.

Steel Cot- 3'x 6'6'' made with 18 gauge 1'' round CR tube for head rest and leg rest frame. The bed area is made up of 1.21 mm thick (18 gauge) CRCA Sheet which is profile folded at all the edges. 5 Nos of extra length wise stiffener made up of 1.21mm thick (18 gauge) CRCA Sheet is added beneath the bed area for extra Strength and stability. Aesthetic side panels made up of 19 mm thick prelaminated wood particle board (ISI & ISO Certified ) for mattress holding is fixed on to the side of the beds. All metal surfaces are finished with 60 microns powder coating. The rate is inclusive of cost of material, manufacturing charges, transportation, loading, unloading and installation at site etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing for steel frames powder coated perforated study chair made with 18 gauge 20mm round CR Tube for leg frame and oval CR tube for seat, back & arm frame with injection moulded steel seat & back are fixed to the frame.All metal surfaces are finished with 60 Microns powder coating. The frame is fixed with superior quality PVC Bush. The rate is inclusive of cost of material, manufacturing charges, transportation, loading, unloading and installation at site etc., complete complying with standard specification and as directed by the departmental officers.

Supply of steel " S " type Chair 18" x 18" made with continuous arms on teak wood frame sheet / back with 1" outer dia tubular pipe of 14 gauge thick with inner fitting (heavy chair ) and Teak wood frame seat /Back and arms with high Quality Nylon wire netted and finished with melamine polish. The ' S ' frame is made of 14 Guage 1" round CR pipe and then powder coated and fixed with PVC bush to the bottom etc., The cost includes cost of materials cost of primer, enamel paint and labour charges for fabrication, cutting, bending, grinding, painting, power consumption for fabrication, loading, unloading and conveyance and Supplied at work sit etc., complete complying with standard specification and as directed by the departmental officers.

Supply of Steel table of size 2'9"x1'9" made out 1 1/4" OD ERW Tube 20 G frames covered in the top with 20 mm thick navopen with mica finishing . The Drawer length 400mmx350mm with 150mm height made out of 187G CR Sheet. The box 400mm (lenght ) x 350mm width and 480mm height made out of 1"OD ERW tube 20G. All Supported with Four vertical tubes and horizontal tube and rubber fet. All members are pretreated and powder coated The rate inclusive of all materials, labour charges for cutting, welding etc., loading, unloading and conveyance and Supplied at work site etc., complete complying with standard specification and as directed by the departmental officers.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) etc., complete complying with standard specification and as directed by the departmental officers.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.) etc., complete complying with standard specification and as directed by the departmental officers.

Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet covered TW switch box and 5A FT switch (two way) and making good of the concealed portion with suitable colour for concealed staircase light point etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4'20 W LED Single box type fitting complete with TW round blocks on wall with PVC unsheathed Copper leads from the terminals to the fittings with 20 W LED tubes with inbuilt electronic driver complete. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4' 20W LED Single box Type fitting complete (Higher end) complete with conduit pipe suspension from ceiling with PVC unsheathed Copper leads from the terminals to the fittings with 20 W LED tube with inbuilt electronic driver complete. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4' 20W LED Twin Box Type fitting complete complete with conduit pipe suspension from ceiling with PVC unsheathed Copper leads from the terminals to the fittings with 2nos. 20 W LED tubes with inbuilt electronic driver complete. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 2' x 2' 24W LED 6500K Square type surface mounting type fitting complete with electronic drivers on ceiling with PVC unloaded leads from terminal to the fitting with LED etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of WT bulk head fitting with guard suitable for 15W LED bulb with 15W LED bulbetc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 7W/9W LED bulb for BH point etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 1200 mm (48") AC ceiling fan complete with 300W stepped electronic regulator with 500 mm down rod on the existing clamp etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of holes in the walletc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep light duty AC Exhaust fan etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete without provision of holes in the wall.etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 48W LED street light fitting IP65 complete with suitable dia GI pipe (class 'B') complete on the existing post / wall with PVC unsheathed Cu. Leads with MS clamps and aluminium painting with LED lamp. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable TW box in flush with wall and concealed with 3mm thick hylem sheetetc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 16A DP MCB 10 KA in suitable sheet steel enclosure in flush with wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 40A DP MCB 10 KA in suitable sheet steel enclosure in flush with wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 32A FP MCB 10 KA in suitable sheet steel enclosure in flush with wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 63A FP MCB 10 KA in suitable sheet steel enclosure in flush with wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with IP 42 protection metal door type with 1No 63 Amps FP MCB 10KA as incoming and 2 Nos 16Amps DPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Higher end) ( Lift DB) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with IP 42 protection metal door type with 1No 32 Amps DP MCB 10KA as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4 way TPN 7 segment MCB DB with metal / acrylic double door cover with IP 42 protection (like Lgrand MDS /Hager make with 1 No 63A FP MCB and 1No 63A FP ELCB 30mA as incoming 3no,s 63A DP MCB isolators for sub incomers and 12No,s 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. the MCBDB and MCB should be with the ISI mark (Higher end)etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 6 way TPN 7 segment MCB DB with metal / acrylic double door cover with IP 42 protection (like Lgrand MDS /Hager make with 1 No 63A FP MCB and 1No 63A FP ELCB 30mA as incoming 3no,s 63A DP MCB isolators for sub incomers and 18 No,s 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. the MCB DB and MCB should be with the ISI mark (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of Three Phase 4 way Vertical type MCB DB with IP 42 protection Double door type DB (legrand) with 1No 63A 4P MCB as incoming and 2 Nos 32A TP MCB and 6 Nos 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. (The MCB DB and MCB's should be Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of Three Phase 6 way Vertical type MCB DB with IP 42 protection Double door type DB (legrand) with 1No 63A 4P MCB as incoming and 3 Nos 32A TP MCB and 9 Nos 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. (The MCB DB and MCB's should be Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of Three Phase 4 way Vertical type MCB DB with IP 42 protection Double door type DB (legrand) with 1No 100A 4P MCB as incoming and 2 Nos 63A TP MCB and 6 Nos 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. (The MCB DB and MCB's should be Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 400 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth Connection only etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 200 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth Connection only etc., complete complying with standard specification and as directed by the departmental officers.

Supply, Erection, Testing and Commissioning of 400A capacity Dust and Vermin Proof Cubical Panel Board made up of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting MCCBs arranged in two Horizontal or Vertical rows with one switch over the other with a central bus bar chamber and two nos. of Horizontal or vertical cable chambers at the two ends one on each side next to the switch chamber and confirming to IE rules. INCOMER: 1. 400A FP Switch Disconnector Fuse Units (Legrand DPX series/LT) = 1 no OUTGOING: 2. 250A TP Switch Disconnector Fuse Units (Legrand DPX series/LT) = 3no 3. 125A TP Switch Disconnector Fuse Units (Legrand DPX series/LT) = 2no 4. 63A TP Switch Disconnector Fuse Units (Legrand DPX series/LT) = 4no (All the MCCBs and MCBs are of make Legrand/L&T with front handle make only) (All the MCCBs and MCBs are of make Legrand/L&T with front handle make only) All switches are with suitable extended handles and spreaded terminals as required. The bus bar chamber will consist of 4nos of suitable size of copper flat for phase and neutral buses on epoxy moulded bus insulators at proper and sufficient spacing between the buses as per IE rules. This bus bar chamber should be segregated from the adjacent chambers by providing hylem sheet of suitable thickness as partisans suitable size of copper flats should be provided all round the panel for earth bus.

Rising main (Power): Design, Supply, Installation, Testing and Commissioning of 250A, 3L+N+PE Air Insulated type Copper, Straight feeder (Rising Main), insulation Class F (155°C), IP 54/55 Dust and Vermin proof made up of 1.6mm CRCA sheet powder coating, Copper earthing plug in points at every floor necessary angle iron supporting of Rising Mains as per CEIG rules & regulations. (Like Legrand/ Equivalent) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing End Feed Unit and 4P 250A MCCB and flange End unit as per CEIG rules and regulations. (Like Legrand/ Equivalent) (Power) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 125A, 4P MCCB Tap off Box with necessary connection. (Like Legrand/ Equivalent)etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 100A, 4P MCCB Tap off Box with necessary connection. (Like Legrand/ Equivalent) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of Flange Unit for Rising Main as per CEIG rules & regulations. (Like Legrand/ Equivalent) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of Rigid Support for Rising Main as per CEIG rules & regulations. (Like Legrand/ Equivalent) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of Spring Hanger, Edge wise hanger for 250A Rising main as per CEIG rules and regulations.(Like Legrand/ Equivalent) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 250A 4 Pole On Load Change over Switch Disconnector in Sheet Steel Enclosure with suitable angle iron frame work with MS cable entry boxes with earth connection only. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 1.5sqmm (22/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 2.5sqmm (36/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 4 sqmm (56/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 4 sq.mm. copper wire making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 6 sq.mm. copper wire making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sqmm. copper wire and making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 4 of 10 sq.mm. (140 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sqmm. copper wire and making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 4 of 16 sq.mm. (101 / 0.45) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sqmm. copper wire and making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodetc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clampsetc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 4 x 16 sq.mm PVC armoured LTUG cable with earth connectionetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodetc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 31/2 x 35 sq.mm PVC LTUG armoured LTUG armoured cable on post or on wall with MS Clampsetc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 31/2 x 35 sq.mm PVC armoured LTUG armoured cable with earth connectionetc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3 1/2 x 35 sq.mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection completeetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodetc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 3 ½ x 185 sq.mm PVC LTUG armoured cable on wall with M.S. special clampsetc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 3½ x 185 Sq.mm PVC armoured LTUG armoured cable with earth connectionetc., complete complying with standard specification and as directed by the departmental officers

Supply and providing cable end termination of 3½ x 185 Sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable socket by crimping etc., with electrical connection completeetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying of 3 1/2 x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 31/2 x 240 sq.mm PVC LTUG armoured LTUG armoured cable on post or on wall with MS Clampsetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying 2 Runs of 3 1/2 x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping 2 Runs of 31/2 x 240 sq.mm PVC LTUG armoured LTUG armoured cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connectionetc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3-1/2 x 240 sq.mm. PVC LTUGaluminiumarmoured cablewith necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officers.

Supply and erection of weather proof pedestal type pillar box of suitable angle iron frame work of size 2 x2 1/2x5 feet using MS sheet with Copper bus bar arrangement inside and housing 400 A TPN switch disconnector,with fuse carriers The whole arrangements fixed in the single MS-Template on backside of the pedestal, the pillar box make up of 16SWG MS sheet steel with front double door (hinged type)pad locking arrangements complete set with neat finishing and both side slanting roof top arrangements of size 5' height x 2 1/2'’width x1 1/2 with 2 coats of red oxide and 2 coat of aluminium paint finish with 2 Nos earthling provisions and the pillar box erected of the ground clearance of 0.75Mtr height with suitable angle iron work and masonry pedestal etc., complete complying with standard specification and as directed by the departmental officers.

Supply, Erection, Testing, Commissioning and Handing over of 1No 15 Persons capacity (Disability person) Gearless Lift (SS304 grade) without machine room as per the following technical specifications Technical Specifications: 1) Locations:- G+6 building 2) No. of Lift: One No. 3) Type of Lift : Disability person Lift 4) Capacity of lift: 15 persons 5) Speed : 1.0 mtr/sec 6) Type of Drive: Microprocessor V3F. 7) No. of floor Ground + 6 floor 8) Total Travel: 18 mtrs (approx) 9) Leveling Accuracy: High level accuracy with smooth & jerk free stopping 10) Construction of car: Stainless steel hairline finish with direct lighting with new beautiful single tube false ceiling with tubular handrail on three sides, 300mm sweep fan 11) Position of Machine :Directly above the Lift level 12) No. of Landing Entrance – One in front 6 Nos 13) No of Car Entrance: One in front only. 14) Car Entrance Door:- SS Frame with Glass Door Centre opening auto door. 15) Landing Entrance Door:- V3F Drive side opening sliding 18SWG stainless steel (Hairline finish) door with provision for emergency key opening at all landing.

16)Carsize : 1100 x 2150 mm 17)Car Clear Opening: 900mmx2000mm 18)Lift Well size : 1900mm wide x 2500mm deep 19) Lift pit depth:-1600mm 20) Power supply: 400/440 V Three phase 50Cy/Sec A.C.supply and 230V 50 Hz single phase AC supply for light. 21)Control: Micro computer based Duplex full collective control with/without attendant. 22)Car fittings: Compact fluorescent lighting with 2Nos 300mm Central sweep fans. 23) Lift Well: RCC Construction with brick masonry. 25) Indication: Up/ Down Digital direction and position indicator for all landing and in car. 26)Emergency alarm bell:-Battery operated alarm bell to be provided with automatic charging device. 27)Emergency light : Battery operated light to be provided with automatic charging device. 28)Fire man’s switch ;To be provided at Ground Floor 29)Minor builders work: To be provided by Lift Contractor. 30)Scaffolding : To be provide by lift contractor 31) Stainless steel sill angles and facia plates. 32) Steel for lift Machinery :To be provided by lift contractor 33)Servicing and Maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year.

34)Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. 35)Provision of Intercom with Phone: To be provided by lift contractor. 36)Lift license : Preparation of drawing payment of charges to CEIG and Insurance policies and obtaining CEIG safety certificate as per lift act should be done by lift contractor 37)Floor annunciator with music 38) Special Features. (a). Infra red door sensor with full height screen. (b). Full width half height rear panel Mirror. (c). Tubular stainless steel handrail on three sides in car. (d). Voltage stabilizer for circuit control. (e). Stainless steel signal fixtures. (f). Vandal proof S.S button with S.S Cover. Lift buttons with Braille codes and handicap sign. (g) Stainless steel door frames for landing doors (h) VF door operator. (i) Call register Signal (j) Stainless steel fascia plate for car operating panel and landing fixtures.

(k) ON-OFF switch for fan & light (l). Over load warning indicator. (m) Pit Ladder 39) Over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight. Rubber padding under winding unit. Motor of adequate capacity, electromagnetic brake with compression springs, car safety gears, buffers, electro mechanical door locks. Emergency key. Side supporting angles motor over load protection devices, final limit switch main suspensions ropes, counter weights, lifting joint joist mounting the machineries. 40) Guarantee: Guarantee for the materials and workman ship of equipments complete should be offered by the Lift firm for a period of not less than one year. 41)Site testing in accordance with IS 14665 should be carried out at the time of handing over. 42) Providing Architraves by supply and fixing for all landing door entrances. Rate of one lift as per above specifications like (Make:Johnson / Kone/OTIS) etc., complete complying with standard specification and as directed by the departmental officers.

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Erection of Lightning Arrestor/ conductor made up 25" dia copper ball with 5 Nos. Spike each 5 length with 1 No. Copper pipe of 1" dia with 2mm thick for a length of 4 feet with bare to be fixed on suitable supporter and supply and fixing of 5 mtr of 2' dia GI pipe and supporting struture for the spikes lightning arrestor with necessary heavy duty clamping arrangements on top wall of supporter for doom with masonary pedestal to withstand wind pressureetc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall floor / ground for earth connectionetc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 25mm x 6mm GI Flat Down Condutor with suitable (2") dia PVC pipe on wall nearground level with suitable clamp set etc., complete complying with standard specification and as directed by the departmental officers.

CCTV Arrangements: Supply, erection, Testing and commissioning of 4 megapixel high-performance Ultra HD Bullet Camera Make Hikvision 4MP / Equivalent) Mini. Illumination: Colour 0.003Lux @ (F1.4, AGC ON), B/W: 0 Lux with IR, Shutter time 1/3 to 1/100000 sec. Warranty 1 years Power input: DC12V/PoE, 1.2W max etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of PVC square junction box for CCTV Camera mounting 4" x 4" Model of and durable material Should be Installed quickly and easily to the ceiling or wall using the included screwsetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of CCTV Housing Outdoor weatherproof Heavy duty Aluminium enclosure with back opening made of heavy duty stainless steel with adjustable cable tray and top swings for Bullet Camera. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of Unmanaged Gigabyte PoE 8+2, 8 port 1000 mbps, 1 Port 1000 mbps uplink, 250m transmission 6kv surge protection 110wetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of Unmanaged Giga PoE 24+1, 24 port 100 mbps, 1 port 1000 mbps uplink and 1 port fiber 100mbps Uplink, 250m transmission 6kv surge protection, 63w etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of 32 Channel NVR Upto 8 Megapixels resolution recording Support 1-ch HDMI, 1-ch VGA, HDMI at upto 4K (3840 x 2160) resolution 32-ch network cameras can be connected with 160M/256M, 4 SATA Interface, Support H.265/H.264/MPEG4 video formats etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of 8TB 3.5 Inch Surveillance Hard Disk with SATA 8GB/s and 64 Cache (MB). Supports 24-7 surveillance -optimized workloads tuned to record about 90% and remaining 10% for play back video footage etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of 12U Rack of 2nos of 10" tray, 595 x 550 x 450 mm, (H x W x D), +C6Top + Bottometc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 50” LED Colour 4K Smart UHD Television Set with IPS display with 2 HDMI Port, 1 VGA Port, 2 USB Port. Make Samsung AU770 Crystal 4K UHD Smart TV/equivalent suitable to view CCTV Cameras etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of 20 Metre HDMI Cableetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of wireless mouseetc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of CAT – 6 et Copper Unarmoured LAN Cable Grade in suitable PVC rigid pipe concealed in wall and ceiling making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and connecting Cat 6 RJ 45 Cable Connector for CCTV Camera should be user friendly and easy to Connect etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 1 kVA Online UPS system (with One hour back up ) with rack arrangement and following specifications and protection against reverse circuit polarity, 440V main input protection, Dynamic short protection with fold back current limiting, low overload, short circuit and pure sine wave output resulting in silent operation of motors and fans. Input voltage : 170V -27V AC Frequency : 50 Hz Input battery voltage : 144 V DC (Make Exide/Numeric/Kirloskar/Numeric/Equivalent) Charger : constant current SMPS charger with full charge cutoff Charging current : Settable upto 8 Amps Inverter: MOSFET Based Full Bridge inverter Output: 230V +/- 3% 50 Hz Output Apparent power: 3000VA Control: Microprocessor based Display : LED display with mains ON, Charger ON, Inverter ON, Battery LOW, Overload Trip etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 3 kVA Online UPS system (with One hour back up ) with rack arrangement and following specifications and protection against reverse circuit polarity, 440V main input protection, Dynamic short protection with fold back current limiting, low overload, short circuit and pure sine wave output resulting in silent operation of motors and fans. Input voltage : 170V -27V AC Frequency : 50 Hz Input battery voltage : 144 V DC (Make Exide/Numeric/Kirloskar/Numeric/Equivalent) Charger : constant current SMPS charger with full charge cutoff Charging current : Settable upto 8 Amps Inverter: MOSFET Based Full Bridge inverter Output: 230V +/- 3% 50 Hz Output Apparent power: 3000VA Control: Microprocessor based Display : LED display with mains ON, Charger ON, Inverter ON, Battery LOW, Overload Trip etc., complete complying with standard specification and as directed by the departmental officers.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 1 of NO: 8 SWG cu wire for earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Preparation of Electrical schematic diagram, site plans, physical layout 10 copies for all buildings in the campus and payment of CEIG documentation charges submission of completion report, rectification report, obtaining drawing approval, safety certification etc., complete including lamination copy fixed at HT substation. (Alteration/ Addition in HT substation, New Hostel Building) etc., complete complying with standard specification and as directed by the departmental officers.

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth etc., complete complying with standard specification and as directed by the departmental officers.

SRK ASSOCIATESS (BID ID -1207775)