CA NO CWE/CHD-17/2020-21 MAINT AND MISC CIVIL REPAIR WORKS AND PERIODICAL SERVICES TO MD ACCN AT N AREA AND HALLOMAJRA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Non skid joint free Ceramic (coloured) tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exc 0.11sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cements and sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete in any pattern and shade/colour complete all as specified and directed.

M&L for Non skid joint free Ceramic (coloured) tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exc 0.18sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement and sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles in any pattern and shade/colour complete all as specified and directed.

M&L Glazed ceramic digital (coloured) tiles in vertical surface 300x 200x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . The tiles shall be laid in pattern with two or more colured tile with and including rendering 10 mm thick on brickwork or concrete surfaces finished even and fair in CM 1:4 in any pattern and shade/colour complete all as specified and directed.

M&L Double Charged Virified Ceramic tiles 8 mm to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and inlcuding screed bed of 15 mm thick CM 1:6 complete all as specified and directed complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 16-18 mm thick Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 07 here-in-before but in riser of steps, skirting, dado and pillar laid over and incl 10mm thick rendering in CM 1:4.

M&L for 16 to 18 mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made PVC door shutter 30 mm thick (style) 10 mm thick panel consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet beading and joined together with solvent cement , suplpling & fixing in frame at site as per specifaction and drawing.

Taking down chowkhats or frames exc. 1.5 sqm but n exc. 4 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter exc.1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down shutter n exc.1 sqm each complete all as specified and directed.

M&L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. including one shop coat of red oxide primer with and including PCC 1:2:4 type B1 as in backfilling of chowkats complete all as specified and directed.

M&L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer with and incl PCC 1:2:4 type B1 as in backfilling of chowkats complete all as specified and as directed.

S&F 35 mm thick 2nd class hardwood Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifeid and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. conforming to Fe 410-W (Gde-E-250) drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates /Grill for windows including joiniting cleat for fixing complete all as specified and directed.

S&F aluminium powder coated glazed shutter (for doors) with style and top rail of section 80x44 mm,16 guage thick and bottom rails of section 112x44 mm of 16 guage thick , middle rail 150x44 mm of 16 guage thick fixed on floor spring, both side openig without sash bars but including 5 mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodised alumnium snap beading, screws, alumnium anodised handle-02 Nos, aluminium anodised tower bolt 200 mm long-02Nos and locking arragment(mortice lock)- 01 No in each shutter complete all as specified and directed. Note- Floor spring shall be measured and paid seperately.

S&F aluminium anodized glazed windows Sliding shutters with sections of top rail and bottom rail 44x44mm, hanging and meeting style 44x44mm aluminium sheet thickness 16 gauge including 125 mm aluminium handles-01/shutter & Aluminium tower bolts 150 mm-01/shutter including fixing ordinary sheet glass panes 5 mm thick with black film, complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F steel ventilator (Box type) with top hung shutter including hinges, steel peg tower bolt complete all as specifed and directed.

S&F 18/19 mm MDF board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets,cupboards etc complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specifid and directed.

S&F 150 mm Extruded aluminium alloy handles powder coated, fabricated type complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F M.S.helical spring including roller & roller plate complete all as specified and directed.

S&F mild steel grill, guard bars conforming to Fe-290 Gde E-165, welded and fixed in wooden/Ms frame etc complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required exc. Half brick but not exc. 1 brick complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.

All as per item No 36 here-in-before but except primer.

M&L for two coats of synthetic enamel paint over one coat of pink primer on new Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onescomplete all as specified and directed by Engr-In-Charge.

S&F 3mm thick Figured glass pin head type, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm fixed to wdn frame in each pane, complete all as specified and as directed.

S&F 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair door closer hydrulicaly, aluminium regulated designation No.1 universal type suitable for door shutter up to 700mm in width and of weight not more than 35 Kg complete all as specified and directed.

S&F in repairs drapery rods (fancy type) 25mm in dia with end MS powder coated brackets & funnels fixed with rawl plug and screws, complete all as specified and as directed.

S&F in Hasp and staple 125 mm alluminum anodised complete all as specified and direccted.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished finished complete all as specified and directed.

Demolition of brickwork brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facing etc complete all as specified.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified.

Taking down cement plaster on brick walls or stone walls of any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Rendering 10mm thick on brick work or concrete surfaces including roof projections and chajjas of buliding ( upto 10 mtr height) in cement mortar (1:3) on ceiling finished even and smooth without using extra cement all as specified and directed.

Rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished fair and even( upto 12 mtr height) complete all as specified and directed.

Rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L three coats of white wash on wall on newly plastered surfaces including prepraration of surfaces complete all as specified.

M&L two coats of oil emulsion distemper on newly plastered surfaces of walls including Challk whitening on plastered surfaces,preaparatory to distempering with and incl. preparing the surface perfectly smooth by using 3 mm (average thickness) wall care putty complete surfaces complete all as specified .

M&L two coats of cement base paint on walls on newly plastered surfaces including prepartion of surfaces with and including alkali resistant priming coat complete all as specified and directed.

Applying two coats of Exterior grade acrylic emulsion over a coat of primer on newly plastered surface of walls complete all as specified and as directed. Make:- Apex ultima or equivalent make specified in Appx 'B'.

M&L three coats of white wash on ceiling on newly plastered surfaces including prepraration of surfaces complete all as specified and directed.

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and applying one coat of white wash on wall surface complete all as specified & as directed.

All as per item No 60 here-in-before but on ceiling.

M&L Complete removal of existing treatment of ceiling and applying three coats of white wash, including cleaning the floor / joinery, surfaces, glass panes complete all as specified.

Preparation of old decorated plastered surfaces of walls by rubbing down,washing,& stopping of distempered surfaces and applying one coat of oil bound distemper (Ist quality) complete all as specified and directed.

All as per item No 63 here-in-before but on ceiling.

Complete removal of existing treatment including Preparation of surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and applying two coats of cement base paint on wall surface (colour & pattern as approved by GE) complete all as specified & as directed.

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and applying one coat of dry distemper on wall surface complete all as specified and directed.

Complete removal of existing treatment, Applying wall care putty 1mm thick on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified and directed.

Applying two coats of oil bound distemper over a coat of primer on newly plastered/or surfaces prepared by using wallcare putty of walls complete all as specified and directed.

Applying two coats of interior grade acrylic emulsion over a coat of primer on newly plastered/or surfaces prepared by using wallcare putty of walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls/soffits of chajjas and roof projections by washing the surfce thoroughly , filling the cracks, craves with crack-filling-compound (Make : DR FIXIT CRACK SHRINK FREE or Equivalent) and applying two coats of acrylic emulsion exterior grade (100%) etc all as specified. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers.(c)Funges formation be cleaned throughly with wire brush or by any means.

Preparation of old treated wooden surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for Preparation of old steel surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed .

Writing letters or figures (Block, Roman,italic or indian) n exc 30 cm high with synthetic enamel paint complete all as specified and directed.

Repairing the edges of concrete chajjas, facias, columns, balcony area & the like by providing PCC (1:2:4) type B-0 including all necessary form work and/ or provision of rendering 15mm thick (average thickness) in cement mortar (1:3) with chicken wire mesh, after applying a coat of cement slurry @ 3kg/sqm of surface finished even and fair, surface area not exceeding 600 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete all as specified and as directed.

Demolition of Reinforced Concrete of any description( reinforcement cut as required to facilitate demolition)and in any position complete all as specfied and directed.

M&L RCC B-1 1:2:4 using 20 mm graded stone aggregate) for Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves ,lintel beam and the like including necessary formwork complete all as specified and directed.

M&L RCC type B-1, 1:2:4 using 20 mm graded stone aggregate) for Chajjas and the like including necessary formwork complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Providing precast cement concrete louvres and jallies, 40mm thick (measured solid), Type B-0 1:2:4 (12.5 mm aggregate) including all mould- ings set in CM 1:4 with including dismantling of old RCC jali fixed in any position and heigth complete all as specified and directed.

Dismantling of walls and ceiling boards or insulation board any thickness, including cover fillets complete all as specified and directed.

M&L for providing and fixing Gyp board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx9mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all as specified and directed.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specified and directed.

S&F Steel tubular section of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 2 mm thick Fibre glass reinforced translucent corrugated sheeting fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F 1mm thick tensile prefab fabric roof sheeting of grade 700 GSM fixed to MS pipe of any description including necessaey fasterners and fixing arrangment complete all as speciffied and directed.

Demolition of Concrete of any description and in any position complete all as specified and directed.

S&F Factory made prepolished precast cement concrete M-30, vibro compacted chequered tile 25mm thick in required size, shape & colour (approved by the GE) set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed.

M&L for Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L 40 mm thick cement concrete 1: 2:4 , type B-1 as in flooring complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.

Demolition of lime concrete of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc complete all as specified and as directed.

M&L cement concrete 1:7:12 type F2 using 40mm graded brick aggregate in sunken floor all as specified and directed.

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying one cost of cold bitumenous primer @ 0.40 litre per sqm over vertical sides and bottom of sunken floors complete all as specified and as directed. Note :- WPC shall be measured and paid seperately.

M&L for APP based polymeric membrane minimum weighing 3.60kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid/appied on primed surface by forced torch application complete all as specified and directed.

Supply only liquid water proofing compound complete

M&L for providing cement concrete PCC 1:2:4 (Type B-0) using 12.5 mm graded aggregate as in fillets at corners specialy provided in sunken portion of WC, bath & kitchen etc complete all as specified and directed.

M&L 25 mm thick cement concrete 1: 2:4 , type B-1 as in flooring complete.

S&F PVC (SWR) pipe 50mm dia of bore as in spouts etc complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, complete all as specified and directed.

S&F tubes 15 mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs complete all as specified and directed.

All as per item No 106 here-in-befor but 20 mm bore complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on brick wall complete all as specified and directed.

Dismantling water tanks of capacity exc. 250 but n. exc. 500 litres complete all as specified and directed.

Dismantling water tanks of capacity exc. 500 but n. exc. 1000 litres complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water (in sink/ wash basin) screwed down for iron pipe and fixed for 15 mm bore pipe complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed.

S&F PVC connections (in repair) 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair CP Stop valves Concealed, cast copper alloy chromium plated (fancy type) screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s fixed to 20 mm bore complete all as specified and directed.

S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore pipe complete all as specified and directed.

S&F in repair health faucets complete all as specified and directed.

S&F single piece vitreous china WC of size 750x360x650 with flushing cistern and connection pipe, P or S trap complete all as specified and directed.

M&L for Vitreous china oval shape wash hand basin white size 560x470mm to be fitted in granite shelf /Rcc slab including 32 mm dia CP waste coupling and 60cm waste pipe complete all as specified and directed.

Disconnecting existing tanks exc 250 ltr and n exc 500 ltrs in capacity for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and reconnecting and re-fixing in position complete all as specified and as directed.

All as per item No.123 but exc 500 ltrs and n. exc. 1000 ltrs in capacity.

S&F in repair chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore pipe complete all as specified and directed.

S&F 15 mm bore Pillar taps fixed in repair cast copper alloy, fancy type with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair CP Stop valves/angle valves, cast copper alloy chromium plated fancy type screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore complete all as specified and directed.

S&F as in repair Sink with drainage board made of stainless steel of wall thickness 1mm thick for kitchen or laboratory with plug, washers and wastes, including bedding in cement sand mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Cutting into existing manholes for removing existing branch drain making good to walling and rendering cutting out branch channel and making good benching for 100mm/75 mm bore pipe.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including fixing bracket, CP waste coupling and waste pipe complete all as specifeid and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with 'P; & 'S' trap and including flush pipe complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) white with and including CI P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.

S&F in repairs Vitreous china half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe discharge pipe of PVC 40mm dia and 40mm Waste coupling of PTMT(half or full threaded) complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm with shower arm 15mm size, 195mm long with bend of 45 degree with flange including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs PVC waste pipe 32/40 mm bore complete all as specified and directed.

S&F in repairs soap dish CP fixed with and incl chromium plated brass screws and wooden /plastic plugs complete all as specified and directed.

S&F in repairs tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

Dismantling of cast iron/ reinforced concrete/PVC drain pipes, 100/75mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

M&L Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm bore fixed in repair complete all as specified and directed.

S&F Cast iron (sand cast) 100mm bore soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F Cast iron (sand cast) 75mm bore soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F Cast iron (sand cast) 100mm bore soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall complete all as specified and directed.

S&F Cast iron (sand cast) 75mm bore soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 50 mm bore fixed in repair complete all as specified and directed.

S&F Cast iron (in repair) Bends (any radius), diminishing pieces or tapers (larger bore measured) 75 mm bore with ovel access door complete all as specified and directed.

S&F Cast iron Bends (any radius) with duck's foot or heel rest 100 mm bore (in repair) complete all as specified and directed.

S&F Cast iron repair Bends (any radius) with duck's foot or heel rest 75mm bore (in repair) complete all as specified and directed.

S&F Cast iron 100 mm bore junction single T equal or unequal with access door fixed in repair complete all as specified and directed.

S&F Cast iron 75 mm bore junction single T equal or unequal with acess door fixed in repair complete all as specified and directed.

S&F 50 mm Cast iron cowls complete all as specified and directed.

M&L for applying two coats of DUCO paint of superoir glossy & antifungal properties,on new steel surface of any description and girth including one coat of primer and prepartion of surfaces complete all as specified and directed.

S&F 10 mm thick toughend door glass plain/frosted as per requirment in fixed partition/doors embossed the design/logo as per requirment or sample complete with all SS (304 Gd) accessories/hardware such as patch fiiling for fixing of fixed partion/door,SS bottom lock for door OPL series of Make-OZONE/DORMA, stainless steel hinges including 450 mm SS handle for glass door-01 pair per shutter. Make-OZONE/DORMA

S&F single cylinder floor spring for glass door make-OZONE cat Part No.FS-11400 or equivalent in Dorma.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F in repair MDF board 9 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets, cupboards & in partition complete all as specified and as directed.

Providing, cement concrete PCC 1:2:4 type B-1 using 20mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs stainless steel grating 100mm dia all as specified and directed.

S&F in repairs salt glazed stoneware gully traps, 150x150mm square or round mouthed, type P complete all as specified.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with/without door access any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with/without door access any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110/110 mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F 5 mm thick sheet glass tinted type,ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair Looking mirror 5 mm thick fixed with CP brass screws over 12 mm thick plywood backing including all necessary rowel plugs & including S&F teak wood moulding/beading of design approved of size 40x40 mm all over external edges of mirror all as specified and directed.

M&L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion.

M/s Super Trading Corporation