Providing street light pole with LED light fittings in sathy road Starting from prozone mall to ragam bakery in Ward No.10,11 21, North Zone.

Amount

Pole fundation Making PCC for levelling coarse of size 700mm x 700mm x 200mm, PCC for leveling coarse 1:4:8 and making RCC foundation of grade M20 (1cement : 1.5 sand:3 stone/brick aggregate) 600mm x 600mm x 900 shall be below F.G.L (Finished Ground Level) and 450mm x 450mm x 300mm above ground level using steel reinforcement of grade RTS with 50mm clear cover to reinforcement and rings using 8mm dia steel reinforcement at 190 c/c using shuttering along with supply & installation of 2 nos of 40 mm dia HDPE pipe for cable entry and cable exit 4 no "J" type foundation bolts of 650mm length shall be anchored in the foundation. It includes water curing as required and soil excavation & back filling. It also includes supply og all material and labour including erection of foundation at site.

Supply, Erection of 8m Free standing double arm bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS - 875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70mm Thickness of pole - 3mm The pole should be hot dip galvanized confirming to BESN ISO - 1461 with thickness of 65 Micron

Supply and fixing of 120W LED street light fitting with dimmable driver, 5 pin NEMA Socket atleast 300 mm length of 3 core 1 sq.mm copper cable and IP 66 Male conncetor complete as per departmental officers.

Supply and fixing of SP-6A to 32A, 10KA MCB 240V 50Hz AC Supply suitable for lighting circuit.

Supply, delivery and installation of 3 core 1.0 sq.mm copper cable with length of 9 meters with IP 66 Female connector in one end suitable to connect with male connector in the LED fittings as per the direction of departmental officers.

Supply and laying of 4x16 sq.mm PVC armoured LTUG Cable and 40mm HDPE Pipe in a trench to be excavated at a depth of 0.75 meter putting 0.15 meter layer of sand and covering the cable completely with bricks and sand refilling the earth to make good

Supply, fixing and providing cable end termination of 4*16 Sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical conncetion complete.

Earthing as per PWD standard with an earth electrode of 2 meter class "B" GI pipe of dia not less than 32mm complete with necessary masonry work (SD 234)

Supply and run of 1 of no.8 SWG GI wire for wearth conncetion (SD 74)

Supply delivery and installation of three phase - RF+4G gatewey street light controller including installation accessories as per the direction of departmental officers.

Supply and fixing of 3 Phase service connection EB Meter box of size 15"x14"x9" with two compartment made up of 16 SWG powder coated vermin proof metal sheet with clamps suitable for 3 phase EB Service connection. The meter box fixed with 12mm wooden board fixed with one number of 63 Amps porceline fuse unit Inter connection with 7/20 Amps PVC insulated copper wire with one number of neutral link. The meter box should be provided with glass in front side fixing the meter box should be made PWD earthing.The rate includes fixing new meter box,EB energy meter and accessories and termination of wires.

SABHARI ELECTRICALS

SHIVANI TECHNOLOGIES

JAYALAKSHMI BUKDERS