1) Providing and fitting of FASD starter along with their allied works at LIS Katal Batal 2) Providing and fitting /replacement of sluice valve, reflux valve and delivery pipe along with their allied works at LIS Katal Batal 3) Providing and f

Amount

Providing and fitting of FASD starter along with their allied works at LIS Katal Batal Providing, installation, testing and commissioning of dry type star delta starter of 120 HP(approx) suitable to run the 07cusecx30mtr head pump (L & T / Havells make) at LIS Katal Batal for pumping unit-I. The starter should consist of sheet metal enclosure inclusive of single phase preventer, 3 no. contactors of appropriate rating, relay, timer, one no. voltmeter, one no. ammeter, on /off switch, phase indicators etc. Giving all the electric connections from motor to starter/panel by way of P/F of 50mm2 multi strand copper cable of 60mtrs approximately after passing through GI pipe of required size or by making of angle arrangement in air along with thimble of appropriate rating/size and complete insulation. Also P/F of 70mm2 multi strand copper cable of 30mtrs length approximately passing through PVC conduit along with MCCB of 250amp of 50K rupturing capacity and thimble of appropriate rating for giving connection from main to starter/panel and testing on full load. Note: The bidders are advised to visit the site and quote the rates accordingly

Providing and fitting /replacement of sluice valve, reflux valve and delivery pipe along with their allied works at LIS Katal Batal Dismantling of old existing 8” dia delivery pipe of unit I by way of cutting / dismantling the old unserviceable/ damaged sluice valve and reflux valve of same dia after cutting the old rusted nuts and bolts. Connecting the delivery line from pump to rising main by way of fabrication work and by P/F of 10” dia pipe of approx 12’ length and sluice valve, reflux valve( PN 1.6) ( kirloskar, KSB, L&T make) of same dia 01 no each along with new nuts, bolts, gasket joints, flanges, bends and reducer etc. The job may involve amendment in the delivery line/manifold as per requirement by way of cutting, fabricating and welding at site. Complete job includes cost of material, hire charges of welding/gas cutting set, other tools and tackles required for execution of job, carriage transportation labour charges and testing complete at LIS Katal Batal. Note: The bidders are advised to visit the site and quote the rates accordingly

Providing and fitting of main reflux valve and its allied works at LIS Khawaskhan. The job involve digging of the earth around the existing rising main near the Y junction approximately 4’ deep 5’wide and 5’ in length then cutting the one piece rising main equal to the size of reflux valve and other piece of 2’ approximately to be used as a tail piece for easy work using gas cutter . P/F of one no flange to the existing rising and one no flange to the tail piece of 2’ then P/F of reflux valve of 10” dia make kirloskar, L & T ,KSB ) PN 1.6 along with new nuts, bolts and rubber sheet joint of required size andthen welding the tail piece to other side of existing rising main by providing a wider layer of welding around the rising main using super bond electrodes. Also P/F of bypass standby system for priming by way of welding 1.5”dia pipe at two point across the reflux valve and joining them by p/f two no bend , one no union and one no gate/ball valve of same dia. Filling the dugout earth around the rising main. Complete job includes cost of material, labour charges, hire charges of welding set, gas cutter/ any other tools and tackles required to execute the works, carriage/deployment charge of machinery/material to be used at LIS Khawaskhan. Note: Bidders are advised to visit the site before quoting rates.

Designing, fabrication, providing and installation of new CGI sheet shed for drought lift irrigation station at Seelam and Rakhchung. Providing , fitting , fabrication and construction of CGI sheet shed of 10 ft- length x 10 ft- width x 10 ft- height (approximately) for drought lift irrigation station by dismantling the suction and delivery pipelines of drought pumps, lifting of existing drought pump from place of installation using tools and tackles. Filling and Excavation of earth on 10 ft x 10 ft area upto suitable level for levelling of surface 10ft x 10ft by compacting the earth manually, laying of layer of 40mm aggregate stones and compacting. Laying of 1:3:6 grade (1 cement: 3 sand: 6 stone aggregates) on the 10ft x 10ft area upto required height. Curing of concrete structure for 5 days. The frame of the shed should be fabricated and welded out of 50 x 50 x 5 mm MS angle iron. The sides of frame must be grouted in concrete ratio 1:2:4 approximately 1.5 feet. Two number centre supports of 50 x 50 x5 mm MS angle iron have to be welded between each side of frame. Providing and fitting of 0.5 mm powder coated CGI sheets of reputed make (Tata/ Essar / Bushan/jindal ) on the fabricated structure with nut, bolts and washers. The shed must be provided with door on one side of suitable width and height, for easy removal of pumping machinery for repairs and maintenance. The shed must be provided with window of 3 ft width x 3 ft height should be fabricated on one side. The shed must have provision for inlet of suction pipe and outlet of delivery pipes. The roof of shed must be inclined from one side to prevent water logging. Electrification of shed by providing and fitting of one no 30 watt LED, 2 no. LED bulbs light inside the shed, by providing and fitting 1 sq. mm copper cable for connections and providing of 2 no. points , all cables must be properly enclosed in PVC conduits duly clamped on shed wall and should not have any loose connections. Providing and fitting of on/off switches for lights and one number socket. Installation of drought pump inside the pump room using crane/ chain pulley. Connecting suction and delivery pipelines. The job also includes cutting of branch of tree and nearby bushes for creates proper space for CGI Shed, cost of material, consumable, handling, , labour charges for both skilled /semi-skilled labour and hiring charges for Crane form work, tools and tackles required during the execution of the job at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

G S ENGINEERING WORKS

NATIONAL ELECTRO-MECH COMPANY

M/S V.N ENGG WORKS

SMART TECH AND CO