Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹40.6 L+₹1.7 L (4.46%)Rejected-Finance KAHIKUCHI MARKET P O AZARA ASSAM 781017 | AZARA | KAMRUP | ASSAM | 781017 | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹44.5 L+₹5.6 L (14.5%)Rejected-Finance HOUSE NO 29 A SIJUBARI NIZARA PATH PO PS HATTIGAON GUWAHATI 38 | KAMRUP METRO | ASSAM | 781038 | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹47.4 L+₹8.5 L (22.0%)Rejected-Finance RANGIYA STATION ROAD WARD NO 2 PO RANGIYA DIST KAMRUP ASSAM PIN 781365 | BAKSA | ASSAM | 781365 | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹50.2 L+₹11.3 L (29.2%)Rejected-Finance AT ROAD SANTIPUR GUWAHATI 781009 ASSAM | GUWAHATI | KAMRUP METRO | ASSAM | 781009 | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹57.9 L
EMD Value
₹1.1 L
Closing Date
6 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Tezpur
HQ CWE TEZPUR PO DEKARGAON DIST SONITPUR PIN 784501 (ASSAM)
SPL REPAIR TO BLDG NO ET-109, 112, 113 AND 198 AT CHANGSARI UNDER GE RANGIA
2022_MES_547654_1
CWE/TEZ(R)/T-27 of 22-23
Open Tender
Civil Works
Item Rate
270 days
GE Rangia
as per tender docus
8 documents required · 8 mandatory
₹1,000
GE Rangia
₹1.1 L
Yes
25 Oct 2022
25 Aug 2022
13 Oct 2022
25 Aug 2022
6 Oct 2022
15 Sept 2022
Amount
Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position
M&L 2nd class hard wood in scantling wrought timber un framed and fixed complete all as specified and directed
Demolition of reed lathing, single or double, including battens and plaster or chicken wire mesh.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.
M&L Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4
G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste
M&L for rendering 15 mm thick on one side of lathing or other than fair faces of brick work in cement mortar 1:4 , surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on other side of lathing or fair faces of brick work in cement mortar 1:6 , surface finished even and smooth without using extra cement complete all as specified and directed.
M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description not other wise described of over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.
M&L for mild steel TMT bars of 10 mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Ditto all as per item No 15 above, but 8mm dia bars in stirrups
M&L precast cement concrete 1:2:4, type B1 (Using 20 mm graded crushed stone aggregate) in Lintels, columns, posts, boundary pillars etc set in cement mortar 1:4
Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings etc.
S&F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks as specified
S&F Pre-painted galvatume aluminium zince coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks as specified
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.
M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath/ hard standing/pavings/plinth protections, finished even and smooth using extra cement
Forming construction joints 30mm deep x 10mm wide filled with sealing compound complete all as specified and directed.
Taking down shutters of any description not exceeding 1 Sq. M each
Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., without sash bars , edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with (stiles and rails 80mm,muntins 60mm & glazing bars 45mm wide) as specified in SSR Pt I Section 8, clause 8.24 (b)
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelaminated colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame at site as per specification & drawing. but wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on and additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly
S & F 75 mm long Butt hinges extruded aluminium alloy with galvanized mild steel hinge pin type, anodised and fixed, type C 21 complete all as specified and directed.
S&F 75 mm aluminium handles, cast type, anodised complete all as specified and directed.
S&F 100 mm Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed.
S&F 100 mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S & F 100 mm long medium weight cold rolled mild steel Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Dismantling of wall and ceiling boards (Fibre, pulp, insulation etc) any thickness, including cover fillets.
S&F exposed GI powder coated snap grid frame of false ceiling 600 x600 mm size of wall angle 25 x 25 x 0.30 mm size cross tee 22 x 35 x 0.60 mm with 4mm dia GI suspender fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm including supply and fixing of 4 mm thick E - board in false ceiling including fixing arrangement from roof and applying three coats of white wash on exposed surfaces all as specified and directed. (Note - Rate included for lowering/shortening of electric fittings such as fan, light fittings etc.)
S & F 3 mm thick Sheet glass, ordinary quality in squares not exceeding 0.5 Sq. M in each pane fixed with cut & mitred beads
S & F stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples fixed to aluminum window with aluminium beads and screws.
S & F in repair stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubbish off the site.
M&L for Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed by Engr-in-Charge.
M&L for complete removal of existing treatment on walls and preparing old painted surfaces and applying two coat of Oil bound distemper over a coat of primer complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed.
M&L preparing old painted un-decorated surfaces of walls including washing, rubbing down and stopping and applying two coats of white wash complete all as specified and directed.
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatmen Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron
Taking down carefully aluminum/copper point wiring (light fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators and separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battons, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc all complete all as specified and as directed by Engineer-in-charge.
Taking down carefully U/S main switches and DB’s incl wooden bds and removing from site incl making good disturbed surfaces of walls all complete.
Dismantling of house service brackets of any size and type and making good the distrubed wall surfaces complete all as specified and as directed by Engr-in charge.
M & L point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, including sunken in cast iron/MS terminal box duly painted with aluminum paint inside and anticorrosive paint out side with 2.8 mm thick backlite hylem sheet cover, ISI for mounting switch & sockets for the following:- Note : (i) Contractor has to make the surface good after flushing the sunken box as existing without any extra cost (ii) length or wiring 10 mtrs from switch board to be considered as one point wiring.
(a) One light/fan/ call bell point controlled by one switch.
(b) One 3 pin socket outlet 5 Amps on independent board.
(c) One 3 Pin socket outlet, 15 Amps, independent board with cable 4 Sqmm and earth cable of 4 Sqmm
S & F switch piano flush type single pole 5 Amps 230 volts complete.
M&L for Switch socket combination 2in 1, 3 pin, 6 and 16 Amp flush type universal.
M&L for Switch socket combination 2in 1, 5 A flush type.
S & F stepped type electronic fanregulator flush type on the existingphenolic laminated sheet etc. as reqd
S & F ceiling rose three terminals PVC/Polycarbonate, isolated body complete.
Supply and fixing LED lights fitting1x 20W, 220V,AC decorative box type with driver holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete.
S & F PVC rectangular block for mounting, DB,s etc. with 3mm thick plastic laminated sheet cover of size 350x300x50 mm deep complete all as specified and as directed by Engr-in charge.
S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-charge.
S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-charge.
Supply and fixing amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of following poles and current carrying capacity complete with connection in the MCBDB testing and commissioning.
(i) SP 6 To 32 AMP
(ii) SPN 40 to 63 AMP
Supply and fixing 240V, 10 KA 'C' curve miniaturecircuit breaker (MCB) of single pole and currentcarrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning.
Taking down and Refixing of old ceiling/exhaust fan to its original location and testing complete all as specified and as directed by Engr-in charge.
S & F LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
S&F House service bracket(Hook type)complete with 3.0m long G.I pipe 40mm dia medium grade,two nos.90 degree bends,M.S hook and stay or guy complete all as specified and as directed by Engr-in charge.
S&F 1100 volts grade heavy duty cable PVC insulated and sheathed aluminum conductor in service connections suspended by insulating hangers not more than 1 Mtr apart including 4 mm suspension wire one twin core cable flat or circular of 16 Sqmm size with multistranded conductor for flood light incl taking down the existing complete all as specified and as directed by Engr-in charge.
Earthing with Galvanised Iron Earth Plate Electrode 600X600X6mm size buried directly in Ground vertically at a depth not less than 2.25 METRE below Ground Level with the Top Edge of Earth Plate at a depth not less than 1.50 METRE below Ground Level connected to Galvinased strip Strip 4.0mm GI Wire as Earth Lead by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal or Coke Dust mixed with common Salt in alternate layers not exc. 150mm thick, Galvanised Iron Strip protected with and including Galvanised Iron Pipe 25mm Bore (dia) Light Grade, upto test points above the Floor Level of the Building situated including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Agg-regate) and RCC Cover of size 540X540X50 mm in RCC 1:2:4 (20mm Graded Stone Aggregate) einforced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways all as complete all as specified and as directed by Engr-in charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .