SPECIAL REPAIRS TO GUN SHED (BLDG NO P -25 P-26, P-27) IN ZONE 10 AT MIL STN TALBEHAT

Amount

M&L for providing plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in filling or mass concrete finished even and smooth without using extra cement complete all as specified and directed.

M&L for 6mm thick asbestos cement.,corrugated or semi corrugated sheets in roof ,wall etc fixed with L-type or J=type or cranked hook bolts complete all as specified and directed.

M&L for 6mm thick asbestos cement two piece adjustable plain wing ridge fixed with L-type or J-type or cranked hook bolt complete all as specified and directed.

M&L for providing plain cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as kerb or benching to wall complete all as specified and directed.

S&F Expanded metal in available size (X PM) and fixed to iron frame complete all as specified and as directed weight n exc 4 kg per sqm complete all as specified and directed.

M&L for brick work with fly ash bricks in modular size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for plastering 15mm thick in CM 1:6 on fair face of wall, finished weven and smooth without using extra cement complete all as specified and directed.

M&L for plastering 15mm thick in CM 1:4 on fair faces of wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of oil emulsion distemper over a coat of primer with 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing old treatment ,washing, rubbing down and stopping of distempered and painted surfaces and preparing the surface old or new and applying two coats of oil emulsion distemper over a coat wall care Birla putty to obtain smooth surface complete all as specified and directed.

M&L for preparing old plastered or unplastered wall surfaces and applying two coat of exterior emulsion paint complete all as specified and directed.

M&L for forming construction joints 30mm deep x1mnn wide filled with sealing compound grade "A" complete all as specified and directed.

M&L for preparing old steel surfaces of any description over 10cm in width or girth not otherwise described and applying one coat of synthetic enameled paint complete all as specified and directed.

Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillarsetc but excluding ashlar facing, dressed stone work and precast concrete complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated in roof covering including ridge complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for hand rails, half round or other stock section or core for wooden hand rails, straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nozing to steps, including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts or struts including cutting tops to shape as required, purling and rafter complete including applying one shop coat of zinc chromate primer complete all as specified and directed conforming to Fe-290 Grade E-165.

M&L for preparation new steel surfaces and applying two coats of synthetic enameled paint complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection / path finished even & smooth without using extra cement and the like complete all as specified and directed.

S&F 40mm thick plain framed paneled shutter (any Nos o f panel)with panels of timber flat on both sides (feathered edge)or veneered particle board medium density ,wood particle board with commercial face veneers fixed to chowkat of 2nd class hard wood complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates of size 125mmx60mm ,including necessary fixing lugs ,hinges ,lock strike plate etc complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or exturded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long (ISI Marked) complete all as specified and directed.

M&L for 100mm MS butt hinges medium weight, cold rolled mild steel and fixed to door frame complete all as specified and directed.

M&L for aluminium alloy handles 150 mm, fabricated type anodized complete all as specified and directed.

M&L for hard core of gauge n exc 63mm ,deposited ,spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for painting to wooden l surfaces with two coats of synthetic enameled paint over a coat of pink primer on new surfaces complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet steel 0.50mm thick on an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No.28 above but plain pre-painted galvalume aluminium zinc coating GI based sheet as in ridge complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates ,finished even and smooth without using extra cement complete all as specified and directed.

Demolition of PCC as in ground floors & pavings not exc. 15 cm thickness (below or above G.L.) complete all as specified and directed.

HARNAM SINGH ANIL SINGH