MAINT AND REPAIR TO EXTERNAL WATER SUPPLY AND CONNECTED WORKS AT EBS BABUGARH UNDER AGE EM I OF GE NORTH MEERUT CANTT

Amount

M&L for taking up or down 200 mm bore Cast Iron water mains (including all fittings), with spigot and socket ends and lead joints cleaning the pipes free from sedimentation / scaling etc. and re-laying the same in trenches, on the ground or on supports or fixed to walls incl testing complete all as specified and directed

All as per Srl item No 01 here-in-before but 150mm bore

All as per Srl item No 01 here-in-before but 100mm bore

All as per Srl item No 01 here-in-before but 80mm bore

M&L for taking up or down 20 mm bore GI water tubing and connections including clearing the pipes free from sedimentation / scaling etc. and re-laying the same in trenches, on the ground or on supports or fixed to walls with all required new fittings and fixtures (in case of old fittings are not suitable) complete incl testing complete all as specified and directed

All as per Srl item No 05 here-in-before but 25 mm bore

All as per Srl item No 05 here-in-before but 40 mm bore

All as per Srl item No 05 here-in-before but 50 mm bore

All as per Srl item No 05 here-in-before but 80 mm bore

S&F in repairs and testing 200 mm bore CI pipes with spiogt and socket ends centrifugally cast class 'LA' in any length suitable for lead joints laid in trenches including necessary cut to length to match the existing fitting / pipes incl taking up or down old unsv pipe making good of disturbed surfaces of roads, path ways etc. complete all as specified and directed

All as per Srl item No 10 here-in-before but 150mm bore

All as per Srl item No 10 here-in-before but 100mm bore

All as per Srl item No 10 here-in-before but 80mm bore

S&F and testing 20 mm bore GI tubing medium grade with all required fittings and fixtures laid in trenches, on the ground or on supports or fixed to walls incl taking up or down old unsv pipe making good of disturbed surfaces of roads, path ways, walls etc. complete all as specified and directed

All as per Srl item No 14 here-in-before but 25 mm bore

All as per Srl item No 14 here-in-before but 40 mm bore

All as per Srl item No 14 here-in-before but 50 mm bore

All as per Srl item No 14 here-in-before but 80 mm bore

S&F and testing 200 mm bore DI pipes with spiogt and socket ends centrifugally cast class 'K9' in any length suitable for and including tyton joints laid in trenches including necessary cut to length to match the existing fitting / pipes incl taking up or down old unsv pipe making good of disturbed surfaces of roads, path ways etc. complete all as specified and directed Note for item No 1 to 22 :- Excavation, earth work and burning or new lead joints shall be measured and paid separately.

All as per Srl item No 19 here-in-before but 150mm bore

All as per Srl item No 19 here-in-before but 100mm bore

All as per Srl item No 19 here-in-before but 80mm bore

Auguring / horizontal boring / road cutting for laying upto 200 mm bore water supply pipe lines across under roads, foot path etc. and making good disturbed areas as before complete all as specified and directed

Excavation in trenches not exc 1.5m wide and not exc 1.5M depth for laying of pipe lines, valve chambers, man holes etc including forming bottom surface to required level and gradient and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for burning out lead joints of the existing 80 mm CI mains in position, including removing old lead carefully without demaging the pipe complete all as specified and directed

All as per Srl item No 27 here-in-before but 100mm bore

All as per Srl item No 27 here-in-before but 150mm bore

All as per Srl item No 27 here-in-before but 200mm bore

M&L for lead joint and testing for 80 mm bore CI pipe including spun yarn etc. for spigot & socket pipes and fitiings complete all as specified and directed

All as per Srl item No 31 here-in-before but 100mm bore

All as per Srl item No 31 here-in-before but150mm bore

All as per Srl item No 31 here-in-before but 200mm bore

M&L for CI or DI fittings for spigot and socket pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, D clamps, angle branch, cross (all sockets or socket & spigot collars, caps and plugs for joining up to 200 mm bore CI pipe in repairs complete all as specified and directed.

S&F and testing, 80mm dia CI non raising type sluice valve both ends flanged with CI body, ISI marked, IS 14846, pressure PN 1.6 with brass spindle with clamps and check nuts, operating hand wheel including dismantle and remove the unserviceable sluice valve complete all as specified and directed Make: Kartar / Zoloto / Leader

All as per Srl item No 36 here-in-before but 100mm bore

All as per Srl item No 36 here-in-before but150mm bore

All as per Srl item No 36 here-in-before but 200mm bore

Supply and fix 150mm bore hand operated butterfly valve, ISI Marked, of pressure rating not less than 15Kg/cm² flanged type including necessary heavy duty gasket, G I Bolts, G I Nuts, G I Washers etc. incl taking down old u/s complete all as specfied and directed Make: Kartar / Zoloto / Leader

All as per Srl item No 40 here-in-before but100 mm bore

All as per Srl item No 40 here-in-before but 80 mm bore

All as per Srl item No 40 here-in-before but 50 mm bore

Supply and fix Dual plates CI wafer type Non Return / Check Butterfly valve, 100 mm bore tested to pressure of 15Kg/Sqcm flanged type including necessary heavy duty gasket, G I Bolts, G I Nuts, G I Washers etc. incl taking down old u/s complete all as specified and directed Make: Kartar / Zoloto / Leader / Swastik.

All as per Srl item 44 here-in-before but 150 mm bore

M&L for dismantling of defective 80 mm dia sluice valve for repairs such as repacking stuffing box of sluice valve spindle, refacing, grinding, stuffing and threading of spindle, replacement of worn out check nut, repairs to gate assembly replacement of jointing materials such as rubber sheets, nuts, bolts & washers, gland rope and refixing in its original position, testing on completion etc complete all as specified and directed

All as per Srl item No 46 here-in-before but 100mm bore

All as per Srl item No 46 here-in-before but 150mm bore

All as per Srl item No 46 here-in-before but 200mm bore

S&F and testing, 20 mm bore, gun metal gate valve / ball valve, ISI marked, hand lever / iron wheel head operated, screwed at both ends for iron pipes and fixed including taking down of old unsv gate valve complete all as specified and directed Make: Kartar / Zoloto / Leader / Surya.

All as per Srl item No 50 here-in-before but 25mm bore

All as per Srl item No 50 here-in-before but 40mm bore

All as per Srl item No 50 here-in-before but 50mm bore

S&F CPVC Ball valve 50mm OD alongwith necessary leak proof CPVC paste / gum incl taking down old u/s complete all as specified and directed Make Astral / Supreme / Finolex

All as per Srl item No 54 here-in-before but 40mm bore

All as per Srl item No 54 here-in-before but 32mm bore

All as per Srl item No 54 here-in-before but 25mm bore

Supply & laying in trenches / floor or fixed to wall / roof using suitable size MS Clamps duly painted, CPVC pipes SDR 11 and incl plain CPVC SDR 11 fittings of size 50mm OD alongwith necessary leak proof CPVC paste / gum incl taking down old u/s complete all as specified and directed Make : Astral / Supreme /Finolex

All as per Srl item No 58 here-in-before but 40mm bore

All as per Srl item No 58 here-in-before but 32mm bore

All as per Srl item No 58 here-in-before but 25mm bore

M&L for repair / rectification of leakages in water supply distribution GI lines of 20 to 25 mm dia incl necessary excavation, returning filling as per site requirement, tightening of loose joints of GI unions, elbows, sockets, tees etc. cutting / threading if required complete all as specified and directed Note: The compliants for the above work are to be collected by the contractor rep from MES maint incharge of EBS Babugarh on daily basis and trades men are to be detailed immediately. Required stationery such as compliant register, Job cards etc shall be arranged and maintained by the contractor. Transport and Tools required for attending the compliants are to be arranged by the contractor.

All as per Srl item No 54 here-in-before but GI tubing 40 to 50 mm dia

M&L for attending break down of water supply pipe line and repair to CI / DI water mains of size 80 mm to 200 mm dia at a given notice including necessary excavation, earth work by manual or using special T&P such as JCB etc. dewatering from the trenches by using pumps or any other mode, rectification of leakages, fixing of CI specials such as collars bends / tail peaces / D-clamp joints etc. and arresting the leakage, testing complete all as specified and directed Note: CI specials, Lead Joints, D-Joints, Clamp joints etc. shall be measured and paid seperately.

M & L for Construction of brick masonry valve chamber of size 1000 x 1000 x 1000 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick, 150 mm wide off sets allround over 100 mm thick hard core, brick masonry walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally and 150mm below GL externally and top of floor including excavation, earth work in soft / loose soil, 5 mm thick MS sheet cover fixed on 50 mm x 50 mm x 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of red oxide primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

M&L for cleaning of 100000 Gallon RCC over head reservoir of any type using construction of staging or by mechanical means for carrying out the inner surface of the walls and ceilings of the tank shall be cleaned with high pressure jet pump after emptying the water in the tank. After thorough cleaning of the tank, the cleaning water and sludge is to be removed by using pump and the sludge has to be disposed off at a place as directed. After removing the sludge from tank, the tank shall be cleaned thoroughly by using high pressure water pump first and again cleaned the tank by using high pressure vaccume pump and after removing the sludge / dirt completely from the tank the floor and inner surfaces of the tank shall be cleaned by using a industrial vaccum cleaner and the tank shall be made fully dust free. After made the tank dirt free the inner surfaces of walls and ceiling of the tank shall be treated with anti bacterial agents. After the treatment as mentioned above, the inner surface of walls and ceiling shall be treated with UV Radiator. After complete treatment is carried out, the all pipes inlet, over flow, delivery, wash out, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surfaces and also the surfaces of sluice valves shall be painted with PO red paint and writing 'Capacity of tank, date of cleaning and due date of cleaning' on wall as specified and as directed. Incl replacing of u/s wire mesh of ventilations of the tank with new mesh complete all as specified and directed by Engineer-in-Charge

All as per Srl item No 58 here-in-before but 50000 Gallon OH reservoir Notes for item No 58 & 59 : (i) The unit rate quoted deemed to be including draining of water with mechanical equipment and working in water and mud etc. (ii) The unit rate quoted deemed to be include all safety precautions which shall be taken while working on RCC over head tank / under ground sump and contractor or his Engineer shall be available during execution of the job. (iii) Lightning arrangements if required to be provided by the contractor temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the MES

Disconnecting the suction and delivery pipe line and electric connections of submersible pump set 25 / 30 HP and removing it from its original position alongwith pipes and fittings carefully by using chain pulley and tripod, transporting the same to the authorised work shop for necessary maint / repairs and refixing the same in its original position after repairs by lowering along with pipes including connecting up of water and electric connections including testing and commissioning complete all as specified. (Depth of bore welll is upto 50 Mtr). Note: Expendable stores like cotton waste / cleaning materials, lubricants, gland packing, metal filling, machining and transportation to and fro from site to work shop and Labour element are deemed to be included in rate quoted.

M&L for rewinding of the submersible motor with super enamelled Copper conductor of good quality, same gauge and same No. of turns as that of existing including tying the winding and connecting the coils and bringing the connections as that of existing complete all as specified including applying insulating varnish, heating and backing the windings thoroughly for submersible motor 25 / 30 HP capacity.

M & L for Opening the Submersible pump set up to 30 HP pump sets for inspection, repairs and reassembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered, including cleaning replacing the minor items like packing bolts, nuts washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surface, making the pump and motor fully serviceable including maching etc and testing the both after refixing and commissioning all as directed for satisfactory operatrion on its full load. complete all as specified and directed Note: Spares parts will be measured and paid under relevent item separately. All minor consumables / Eqpt /Tpt required shall be deemed as included in the rates quoted.

Supply only Motor bearing bush LB suitable for submersible pump set up to 30 HP capacity. complete all as specified and directed

All as per Srl item No 71 here-in-before but Thrust bearing set

All as per Srl item No 71 here-in-before but Impeller

All as per Srl item No 71 here-in-before but Stage casing

All as per Srl item No 71 here-in-before but Section bush

All as per Srl item No 71 here-in-before but Pump NRV

All as per Srl item No 71 here-in-before but Discharge out let Bush LB

All as per Srl item No 71 here-in-before but Discharge out let.

All as per Srl item No 71 here-in-before but Middle bush LB

All as per Srl item No 71 here-in-before but SS sleeves

All as per Srl item No 71 here-in-before but Neck ring stage casing

All as per Srl item No 71 here-in-before but Sand guard

All as per Srl item No 71 here-in-before but Oil seal

All as per Srl item No 71 here-in-before but Bowel case

All as per Srl item No 71 here-in-before but stainless steel shaft of standard size

S&F in repairs, flexible submersible cable 3 core 16 Sqmm with stranded Copper conductor, 1100 volts grade, PVC insulated, PVC sheathed, connecting with necessary end ferrules / water proof joints complete all as specified and directed

S&F in repairs, fully automatic star delta motor starter suitable for 25 / 30 HP submersible pumpset, 3 phase, 415 V with relay range of 45 to 75 Amps incl enclosure. complete all as specified and directed. Make : L&T, model No. ML- 4FASD or equivalent of C&S / Legrand

S&F in repairs, Pressure Gauge, 100mm dia, 0 - 14 Kgs rating complete all as specified and directed Make: Guru / Pfizer

S&F in repairs, installation, testing and commissioning, dosing system consisting of Syntex make 100Ltr capacity poly Ethelene (PE) tank, Fibre reinforced plastic (FRP) lid have port hole for pouring calcium based grenual disinfectant chemical and water when necessary and provision for mounting Decrin dosing pump, level indicating gauge, agitator having shaft and blade in SS-316 (FRP/EPOXY COATED) with 1 phase motor 920 rpm, 240V fixed on hylum sheet not less than 3mm and steel bolts, nuts, washers etc. dosing pump, high pressure, single head gear motored adjustable dosing pump stroke / flow of solution with accessories such as superior quality PVC tubing connecting nuts, ejection check valves, clay weight and ferrules incl all necessary fixing arrangements complete all as specified and directed. Make: RMCO, Milton Roy India , Maic India

S & f & commissioning of Microprocessor based circuit type water level device consist of seven segment 2" Led Display fitted in the control panel made of CRCA 16 SWG sheet with chemicl grade powder coating to display water level in tank,SS304 grade level sensor pipe fitted in the tank by clamping at the bottom & the top of the tank consist of mgnetic float & electronic switch for long life, the pump automaticlly switch off when the water level in OH tank reaches the maximum level.Visul display with audio alram on low water level in tank, audio alaram on full tank with ON/OFF control, Toggle Switch for manul run of pump when tank is full heavy duty rubber coated wire (appx 100 mtrs) for connecting the sensor, all electric and plumbing work will be included in this item complete all as specified and directed

M&L for Structural Steel Work, made out of Fe 410-W (Gde-E-250) quality-A Rolled Mild Steel Channel, Angle or Tee Sections, MS sheet with hinges & locking arrangements etc. cut to shape / ordinary length, drilled and countersunk for Screws / Bolts, including bending and welding duly painted with 2 coats of Anti Corrossive Synthetic enamel paint over a coat of Zync Chromate complete all as specified and directed.

M & L for Cement concrete for coping / support / foundation of GI pipes, Pumpsets etc. incl necessary breaking or digging of floor, Type B1, 1:2:4, using 20 mm graded stone aggregate incl necessry form work and faci finish to exposed surface complete all as specified and directed

M & L for carrying out "B" check of 320 KVA DG set through authorised service dealer of the manufacturer including replacement of "B" check service kit all as per manufacturers standards complete all as specified and directed

All as per Srl item No 93 here-in-before but for 50 KVA DG set

All as per Srl item No 93 here-in-before but for 15 KVA DG set

M&L for draining out old engine oil, S&F Engine lubricanting oil conforming to the engine manufacturer requirement of classification SAE 15 W 40 lube oil with API and CP - 4 classification complete all as specified and directed Make : Servo / Castrol

Supply & replace radiator Hose Pipe Set for the 320 KVA DG Set.

All as per Srl item No 97 here-in-before but for 50 KVA DG set

All as per Srl item No 97 here-in-before but for 15 KVA DG set

M & L for Overhauling of radiator including dismantling from engine, opening of radiator, cleaning of radiator tubes, fans with acid and removing the scaling & dust, brazing the copper tubes, arresting the leakages completely etc and re assembling the radiator and fixing back to engine including replacement of radiator hose with circlips for 50 KVA DG Set complete all as specified and directed

All as per Srl item No 100 here-in-before but for 15 KVA DG set

S & F in repair for radiator including dismantling from engine and fixing the new radiator including hose with complete accessories including taking down old unserviceable radiator 320 KVA DG set complete all as specified and directed. make : Crompton.

Supply & fix flexible coupling for 320 KVA DG Set including alignment of alternator with engineer complete all as specified and directed

All as per Srl item No 103 here-in-before but 50 KVA DG set

All as per Srl item No 103 here-in-before but 15 KVA DG set

M & L for alternator servicing, decarbonising the alternator coils, re-varnishing, heating, bearing checking, re-greasing and termination, tinning for 320 KVA DG Set complete all as specified and directed

All as per Srl item No 106 here-in-before but for 50 KVA DG set

All as per Srl item No 106 here-in-before but for 15 KVA DG set

Supply and filling coolant of superior quality. Make Servo / Castrol complete all as specified and directed

Labour for general servicing by authorised rep of manufacturer of DG Set 320 KVA draining out engine/ lubrication oil flushing and cleaning of oil chamber and pouring new engine oil after by opening of tappet cover / top cover tappet clearance setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, shellac/ bostic tube, oil pan / chamber gasket including fixing of any other defective parts to be replaced at the time of servicing complete all as specified and directed (All worn out parts and oil shall be measured & paid separately under respective item) complete all as specified and directed

All as per Srl item No 110 here-in-before but for 50 KVA DG set

All as per Srl item No 110 here-in-before but for 15 KVA DG set

M&L for cleaning of diesel tank of DG Set 320 KVA including replacement of worn-out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed.

All as per Srl item No 113 here-in-before but for 50 KVA DG set

All as per Srl item No 113 here-in-before but for 15 KVA DG set

Supply and fixing battery 12V 180 AH including replacement of terminal and connecting lead of minimum 35 Sqmm multi stranded copper wire not less than 4 RM complete all as specified and directed Make for item No 108 & 109 : Exide / Amaron

All as per Srl item No 116 here-in-before but 100 AH

Dismantling of burnt/defective wiring system of DG Set 320 KVA and M&L for complete wiring of required size with sleeves thimbles, lugs etc for DG set complete all as specified and directed

All as per Srl item No 118 here-in-before but for 50 KVA DG set

All as per Srl item No 118 here-in-before but for 15 KVA DG set

Disconnection and taking out the unservisable turbo charger assembly of DG Set 320 KVA and taking to workshop, strip opening of turbo charger and replacement of repair kit reassembling and fixing back to engine and testing complete all as specified and directed.

All as per Srl item No 121 here-in-before but for 50 KVA DG set

All as per Srl item No 121 here-in-before but for 15 KVA DG set

M & L for servicing, repairing, maintenance of self starter assembly of DG Set 320 KVA, complete with switch magnet, carbon set, field coil, clutch assemble, solenoid switches and refixing the same in original position complete all as specified and directed.

All as per Srl item No 124 here-in-before but for 50 KVA DG set

All as per Srl item No 124 here-in-before but for 15 KVA DG set

Supply & Replace Fan belt set of existing size complete of DG Set 320 KVA complete all as specified and directed

All as per Srl item No 127 here-in-before but for 50 KVA DG set

All as per Srl item No 127 here-in-before but for 15 KVA DG set

Supply & Replace Oil temperature gauge 0-130C complete all as specified and directed.

Supply & Replace Water temperature gauge 0-130C complete all as specified and directed.

Supply & Replace DC ammeter 0-50 complete all as specified and directed.

Supply & Replace Tachometer 0-2500 RPM complete all as specified and directed.

Supply & Replace Ignition switch DC with Key complete all as specified and directed.

Supply & Replace Oil pressure gauge 0-7 Kg/Cm complete all as specified and directed.

Supply & Replace Distilled Water complete all as specified and directed.

Supply & Replace Battery lead terminals complete all as specified and directed.

Supply only Petrolium Jelly complete all as specified and directed.

S & F automatic battery charger for 12/24V battery including hight cut arrangement complete with all necessary controls complete all as specified and directed.

M&L for painting of complete of DG Set 320 KVA engine and alternator body including foundation and exhaust and fuel tank with one under coat and one finishing coat with heat resistant enamel paint of approved colour after cleaning preparation of surface of existing colour all as specified and directed including writing of machine make serial no and MES NO with white paint in bold letters complete all as specified and directed. Note:- All original plates of engine & alternator will be cleaned immediately after painting.

All as per Srl item No 140 here-in-before but for 50 KVA DG set

All as per Srl item No 140 here-in-before but for 15 KVA DG set

S&F in replacement of DG set door lock with handle with double key complete all as specified and directed

S&F in replacement of Automatic voltage Regulator (AVR) suitable for DG Set of 320 KVA capacity with and including taking out old AVR and making all connection testing for smooth operation complete all as specified and directed. Make : Kirloskar/Senelac

All as per Srl item No 144 here-in-before but for 50 KVA DG set

All as per Srl item No 144 here-in-before but for 15 KVA DG set

M&L for facrication, supply and install suitable type and size heavy duty silenser unit for 320 KVA DG set incl necessary MS works, welding works, painting works, clamps, nuts, bolts and washers incl dismantle & remove old unserviseable corroded exhaust silenser unit complete all as specified and directed

S&F in repairs, thermal over load relay of various ranges starting from 3 Amps to 15 Amps complete all as specified & directed. Make : Type ML0 to ML 1.5 of L&T /BCH/ C & S Electric / Siemens.

S&F in repairs, thermal over load relay of various ranges starting from 9 Amps to 42 Amps complete all as specified & directed. Make : Type ML2/ML3 of L&T or equivalent of BCH/ C & S Electric / Siemens.

S&F in repairs, electronic timer suitable for 240 / 415 Volts, 50 Hz for different timer range starting from 3 seconds to 120 seconds complete all as specified & directed . Make : L&T / Siemens.

S&F in repairs, testing single phase preventor, auxiliary volts 415 volts, type VSP -D1 of Minilec or equivalent of L&T / Siemens make suitable for 3 phase AC supply complete all as specified & directed.

S&F in repairs, testing push buttons with thermo plastic body actuators with carrier having flush type push button complete all as specified & directed . Make : BCH/C & S Electric /L&T / Siemens.

S&F in repairs, testing pilot lamps LED type with integral circuit & cluster LED suitable for operating at 240 /220 Volts complete all as specified & directed. Make : BCH/C & S Electric /L&T / Siemens.

S&F in repairs, PVC pipe silk cotton / Synthetic thread braided, superior quality of size 25mm bore complete all as specified and directed

All as per Srl item No 156 here-in-before but 20 mm bore

All as per Srl item No 156 here-in-before but 15 mm bore

Preparation of the existing decorated steel surfaces of existing panels of any description & in any position & applying two coats of synthetic enamelled paint of approved shade complete including writing details & information on its panels with paints in the pattern & style to match with the words of existing panel complete all as specified and directed

M&L for repair of burnt / perished cable ends on incoming and outgoing feeders of panel equipments and other machinery including cutting of burnt ends preparing / dressing of cables end crimp with suitable size of cable lugs (cable lugs will be measured and paid seperately) incl providing, fixing suitable nuts / bolts / washers etc. all as directed for 70Sqmm 3.5 core cable complete all as specified and directed

All as per Srl item No 160 here-in-before but 95Sqmm 3.5 core

All as per Srl item No 160 here-in-before but 120Sqmm 3.5 core

All as per Srl item No 160 here-in-before but 150Sqmm 3.5 core

All as per Srl item No 160 here-in-before but 185Sqmm 3.5 core

All as per Srl item No 160 here-in-before but 240Sqmm 3.5 core

S&F in repairs Aluminium terminal lug / socket suiable for 70 sqmm size cable complete all as specified and directed

All as per Srl item No 167 here-in-before but 95Sqmm 3.5 core

All as per Srl item No 167 here-in-before but 120Sqmm 3.5 core

All as per Srl item No 167 here-in-before but 150Sqmm 3.5 core

All as per Srl item No 167 here-in-before but 185Sqmm 3.5 core

All as per Srl item No 167 here-in-before but 240Sqmm 3.5 core

M&L for maintenance of AMF panel installed at variuous sites / installations incl checking of connections of cables and tightening of loose nuts and bolts of bus bar chamber. The cost includes minor items like replacement of washers, nuts and bolts etc. required for maint of panel complete all as specified and directed

S&F in replacement, asbestos rope of 19 mm dia around of the exhaust pipe of diesel engine any cap complete all as specified and directed

S&F in replacement, rubber mat in replacement for installations size 2 mtr X 01 mtr X 15 mm thick, ISI marked complete

M&L for fabricated and duly painted self reflective sign board of size 1200mm X 900 mm, min pedestal height 1.50 Mtrs from GL, made out of not less than 2 mm thick MS sheet welded on 40mm dia medium grade MS tube, with blue colour back ground and silver self reflected border and computerised self reflected letters on both side (matter as provided by GE) complete incl dismantle and taking out old sign boards of any size / type complete all as specified and directed

S&F in repairs, Sine wave invertor Single phase, 240 volts, 800 VA with 12V 150AH tubular battery compete complete all as specified and directed Make: V-Guard / Microtech / Amaron

S&F in repairs, connect, On Load Change Over Switch, 4P, 500 Amps, 415 volts with metallic enclosure complete all as specified and directed

All as per Srl item No 177 here-in-before but 100 Amps

All as per Srl item No 177 here-in-before but 50 Amps

S&F in repairs, connect, MCCB 4 Pole, 415V, adjustable type, 400 Amps, 35KA with cable spreaders complete all as specified and directed

Preparation of the existing decorated steel surfaces of existing panels of any description & in any position & applying two coats of synthetic enamelled paint of approved shade complete including writing details & information on its panels with paints in complete all as specified and directed

All as per Srl item No 182 here-in-before but 100 Amps, 35 KA

All as per Srl item No 182 here-in-before but 63 Amps, 25KA

Earthing complete with galvanised steel earth plate electrode size 600 x 600 x 6mm thick buried directly in ground in vertically in a pit of depth not less than 2.25mtr below normal ground level with top edge of the earth plate not less than 1.5mtr below normal ground level from surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including GI earthing strip 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by GI protection pipe light grade 40mm dia connected to main earth wire on pole or control board and GI pipe light grade 20mm bore for watering funnel with wire mesh, PCC chamber pit in PCC 1:3:6 type C-1, 40mm thick precast RCC (1:2:4) type B-0 cover reinforced with 8mm dia TMT bars @ 10 cm C/C on both sides and handles, excavation and earth work in any type of soil and removal upto 50m complete all as specified and shown in elctric plate No 3 of SSR Part I (2009) connecting to earthing test point including testing on completion complete all as specified and directed (Note : Main earth lead beyond 7.5 metre measured & paid for seperately.)

Jain Traders