Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹28.1 LAccepted-AOC | 1 | Accepted-AOC Acceptance Of Tender | |
| 2 | 2₹30.5 L+₹1.5 L (5.06%)Rejected-Finance | 2 | Rejected-Finance Not L1 | |
| 3 | 3₹31.2 L+₹2.1 L (7.40%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 3 | Rejected-Finance Not L1 | |
| 4 | 4₹31.6 L+₹2.6 L (9.08%)Rejected-Finance | 4 | Rejected-Finance Not L1 | |
| 5 | 5₹31.7 L+₹2.7 L (9.33%)Rejected-Finance | 5 | Rejected-Finance Not L1 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
18 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
SPL REPAIR TO BLDG NO 2/17 TO 2/24 (8 x ORMD ACCN) AT OLD VICTORIA LINE UNDER GE (WEST) LUCKNOW
2023_MES_633779_1
CWE/LKO/W/T-74 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Lucknow
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE West Lucknow
₹77,000
Yes
19 Mar 2024
21 Dec 2023
25 Jan 2024
21 Dec 2023
18 Jan 2024
4 Jan 2024
21 Dec 2023 - 4 Jan 2024
Amount
Dismantling brick tiles or terracing tiles, single layer of roofs including mud pushaka etc complete all as specified and directed.
M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:3) using 100 % coarse sand on roof / parapet walls with liquid water proofing compound mixed as per manufacturing instructions. (b) Applying a coat of bitumenous primer confirming to IS-3384-1986 @ 0.40 ltrs/Sqm on prepared surfaces and allow to dry. (c) Supply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (d) Supply and laying 40 mm thick PCC tiles size 300 x 300 mm best quality well over and including 15 mm thick screed bed in CM(1:4) and jointing and pointing in CM (1:3) by mixing polymer base liquid water proofing chemical as per manufacturer instructions. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.
M & L for cleaning of all loose dirt and dust from roof surfaces and provision of water proofing treatment to Mumty roof slab and vertical surfaces with APP based modified polymeric membrane centre core 100 micron HMHDPE outer film 20 micron each having thickness 3mm, weight not less than 3Kg/Sqm as per manufacturers instruction with torch application complete all as specified and directed by Engineer-in-Charge with following course of description below: (a) M&L for screed bed 10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using liquid WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed (b) First coat apply bituminous primer confirming to IS-3384of 1965 @ 0.4Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated (c) Second course of laying of APP based modified polymeric with 100mm overlap in longitudinal direction 150mm in tranverse direction sealed and bounded to the surface by torch application method. All joints and changes in all direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane Note ::- (i) The liquid water proofing compound measured & paid separately relevant Item.
M & L for brick work using fly ash brick conforming to IS-12894:2002 old size Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) including demoliton of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.
M&L 15 mm thick rendering in CM (1:6 ) on brick wall or concrete surfaces finished fair and even including Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with liquid water proofing compound (ISI marked) as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. incl mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth including Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc Note : - Supply only liquid water proofing compound shall be measured and paid for separately complete all as specified and directed.
Supply only liquid water proofing coumpound
M&L 5 mm thick rendering in CM (1:3 ) on ceiling surfaces, finished fair and even including Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L preparation of New plastered surface of walls and applying two coats of oil bound distemper over and incl one coat of wall care putty ccomplete all as specified and directed.
Complete removal of existing treatment of Old plastered surface of walls and applying two coats of oil bound distemper over and incl one coat of wall care putty complete all as specified and directed.
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed.
Material & Labour for preparation of old plastered surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.Note- Primer and emulsion to be carried out through air less spray machine (Mechanical means)
M&L for preparation of new ceiling surface and applying three coats of white wash complete all as specified and directed.
M&L for preparation of Old ceiling surface and applying three coats of white wash complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site complete all as specified and directed.
Taking down Shutters of any description but exc 1 sqm and n exc 2 Sqm each complete all as specified and directed.
M&L Pressed steel door frame of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
S & F of factory made Plain framed 35 mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated 2nd class hard wood rail and style complete all as specified and directed.
Supply and fixed 35mm thick factory made hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash barsscomplete complete all as specified and directed.
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S & F Powder coating Anodized aluminium frame for doors, windows with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as directed & directed.
S & F powder coating anodized aluminium glazed window shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 02 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles in each shutter complete all as specified and directed.
S & F powder coating anodized aluminium glazed ventilator shutter half portion fixed with figured glass and other half portion with movable louvred complete all as specified and directed.
Supply & fix stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stanless steel staples to windows complete all as specified and directed.
S&F 4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in squire not exc 0.5 sqm each panes complete all as specified and directed.
S&F 4mm thick frosted glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified and directed.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
Supply & fix Stainless steel Butt hinges 100mm size complete all as specified and directed.
Supply & fix 200mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.
Supply& fix MS ordinary pattern spring "plate type" including roller & roller plate complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.
M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of Old wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of Old steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Taking up or down steel water tubing and connections of 15mm borecomplete all as specified and directed.
Taking up or down steel water tubing and connections of 20mm bore complete all as specified and directed.
M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F in repair 15 mm bore mixer Pillar taps half turn, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.
S & F in repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.
Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass coupling and washer complete all as specified and directed.
Supply & Fixing in repair copper alloy long body bib taps half turn chromium plated suitable for 15mm bore pipe with capstain head complete all as specified and directed.
Supply & Fixing in repair gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified and directed.
Supply & Fixing in repair CP shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed.
Supply and fixed in repair PVC rotational moulded over head storage tank 500 Lts capacity including 20mm dia PTMT float valve complete all as specified and directed.
Supply and fixing and add in fixed in repairs of vitreous china wash hand basin flat back size 550x400mm and including brackets and CP waste coupling 32mm dia and PVC waste pipe,complete all as specified and directed.
S&F in repairs PVC valveless symphonic action type low level dule type flushing cistern (ISI marked) of including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.
M&L in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
Supply & fix in repair CP Brass Tabular Towel Rail, 20mm dia D type 60 cm long between flanges complete all as specified and directed..
S&F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed.
S&Fin repair sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls 100 mm bore complete all as specified and directed.
S&Fin repair sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls 75 mm bore complete all as specified and directed.
S&F CI Bends (any radius), diminishing pieces or tapers (larger bore measured) 100 mm bore complete all as specified and directed.
S&F CI Bends (any radius), diminishing pieces or tapers (larger bore measured) 75 mm bore complete all as specified and directed.
S&F Cast iron cowls suitable for 75mm bore pipes complete all as specified and directed.
Supply and fixed in repair 75 mm dia cast iron nahani trap with CP grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.
M&L for glazed ceramic colour tiles of size 350 x450mmx 7mm, 450x 350x 7 mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over 10mm thick rendering in cm 1:4 complete all as specified and directed.
M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match complete all as specified and directed
M&L for ceramic colour floor tiles shade as approved size 7- 8 mm thick area of each tile exc 0.18 but n exc 0.38 Sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match complete all as specified and directed
M&L for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed
M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed.
Demolition of PCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.
Demolition of RCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified and directed.
M&L RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves, RCC Parapets and the like including necessary form work complete all as specified and directed.
M&L Mild Steel TMT bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including rounding to edges of stone slabs complete all as specified and directed.
Drilling through holes in granite stone for inserting pipesetc no exc 25 mm dia complete all as specified and directed.
Supply & Fixing in repair sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed.
S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900x750x250 mm including screws and weight not less than 5.00 Kg complete all as specified and directed.
Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes byu porable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. Contd..../
(f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete.
S&F in repair fancy type vista pattern curtain roads aluminium with required colour powder coated of approved shade including bracket/junctions /wall to wall/ lattu and with rings of best quality as approved by Engineer-in-Charge complete all as specified and directed.
S&F kitchen PVC cabinet and cupboard in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincluding all necessary fittings as per site requirementand as per make and specification mentioned as per drawing and complete all as specified and directed.
S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed.
S & F of 100mm size Extruded aluminium alloy handles fancy type, fabricated type, anodised complete all as specified and directed.
S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.
M&L for 100 mm thick Cement concrete PCC 1:4:8 type D-2(using 40 mm graded granite stone aggregate) in sub base of flooring complete all as specified and directed.
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footpa th, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Taking up broken existing sewer line of any depth and replacing sewer pipe with SGSW pipe 150mm bore including jointing of pipe in CM 1:1, haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded brick agg incl necessary excavation and earth work, disposal of material up to a distance of 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and directed.
M&L for providing precast RCC cement concrete Type B1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas water troughs,mangers, shelves and similar articles with plain face complete all as specified and directed.
Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etccomplete all as specified and directed.
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and directed.
Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and directed.
M&L, Point wiring for One light/fan point controlled by one switch and using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-(NOTE: Switch and socket to be measured and paid for separately):-
All as item no 94 One socket outlet point 5 Amp on an independent board complete all as specified and directed.
All as item no 94 Same but on the same board complete all as specified and directed.
All as item no 94 Call bell / buzzer point controlled by one bell push complete all as specified and directed.
All as item no 94 For one light point controlled by two 2-way switches, with cable 1.5 sqmm complete all as specified and directed.
All as item no 94 One light point controlled by two 2 way switch complete all as specified and directed.
All as item no 94 herein before but using 2.5 sqmm, PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board complete all as specified and directed.
S & F switch piano flush button single pole one way 5 Amp 240 volt complete complete all as specified and directed.
S&F switch piano flush button single pole two way, 5 Amp 240 volt complete complete all as specified and directed.
Ditto as item 102 but using 15 Amps complete all as specified and directed.
S&F switch piano flush button single pole two way 5 Amp 240 volt complete all as specified and directed.
S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed.
S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed.
S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed.
S&F bell push single pole one way 5 Amp socket outlet point on an independent board complete all as specified and directed.
S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and directed.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.
S&F fan regulator electronic, step up socket type, 240 volt suitable for BLDC fan and conection complete all as specified and directed
Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete incl Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.
S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed.
S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed.
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed.
M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)
M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)
S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar , DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class.
S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and directed.
S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified and directed. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)
S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and directed.
S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacitycomplete all as specified and directed.
Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
Taking down electric meter and refixing on new board after rewiring in replacement of unservicable wirecomplete all as specified and directed.
Taking down ceiling fan 1200/1400 mm sweep any type and refixing after oiling, gressing and painting with writing the MES no including electric connetion work complete all as specified and directed.
S&F BLDC ceiling fan 1200 mm sweep with powder coated aluminium blades min air delivery 220 m³ /min, power consumption 28 watt, star rating (BEE) 5 star, 350 RPM with down road as per site requirement along with connected accessories incl provn of connection with three core flexible copper cod of size 1.5 sqmm from ceiling rose to fan min 2 year product warranty and 05 year motor warranty complete all as specified and directed.
Taking down Exhaust fan 350/450 mm sweep any type and refixing after oiling, gressing and painting with writing the MES no and any reqdof anchorfastner nut bo;t washer , including electric connetion work complete all as specified and directed.
Supply and fixing exhaust/fresh air fan 230/240 V of size 250 mm sweep (PVC body) 1100-1325 RPM with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.
S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity complete all as specified and directed.
Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sq mm 3.5 core complete all as specified and directed.
Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables and complete all as specified and directed.
Returning, filling in soil watering and ramming into layers of 25cm after laying of cable complete all as specified and directed.
Disposal of surplus soil n.exc 50M distance from the starting point and depositing where complete all as specified and directed.
M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed.
Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed.
S & F pipe galvanised `light grade', 50 mm Bore dia for passing out cable including all fittings laid in trenches or fixed on wall. complete all as specified and directed.
M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and complete all as specified and directed.
M/S Vindhya Infraventures
QUALITY CONSTRUCTIONS CO
AJAY CONSTRUCTION
ANIL CONSTRUCTION
M/s Chandra Mohan and Sons
M/S SWATI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .