8266 ADDITION/ ALTERATION TO BUILDING NO P-49 AT NAVAL DOCKYARD MUMBAI

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

S & F Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S&F 4.8mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.

S&F Extrude aluminium anodised alloy handles, fabricated type 150mm size.

M & L for Floor door stopper of aluminium alloy body 140 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed..

M&L for Water proofing plaster 15 mm thick on Brick masonry surface or surface in 1:6 and finished even and smooth with out using extra cement. complete all as specified and directed by EIC (Note : WPC will be measured and paid seperated).

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even & smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc all as specified and directed.

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of alkali resistant primer.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel (Make -Armstrong/ Chanakya/ Everest.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

Material and labour for machine pressed chequered cement coloured tiles of size 300mm x 300mm x 20mm thick with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Enginner-in-Charge.

M&L for 25mm thick sand under the interlocking tiles complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block With Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base.

M&L for cement concrete type B1 in 1:2:4 using(20mm graded stone aggregate) as in kerbing all around of tile complete all as specified.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia

Ditto all as per item No 40 above but 75 mm bore.

S&F PVC (SWR) bends/ shoes any radius of 110 mm dia

S&F PVC (SWR) bends any radius of 75 mm dia

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door

Ditto all as per item No 46 above but 75mm bore

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide in for foundation etc getting out in hard dense soil .

Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in sub base, foundations, fillings & mass concrete and haunching of pipe etc all as specified and directed.

M&L brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified.

S&F for Cast iron work grade FG 150, Articles exc 5 kg unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles etc complete all as specified and directed.

Returning and filling in including spreading, levelling, watering and well rammed in layers not exec 25 complete all as specified and as directed as in hard/dense soil complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and as directed

Removing debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil outside MD land.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge.

M&L for concealed point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessories including modular metal flush box and cover plate and frame of required module including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including modular box and cover plate all as specified.Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Make of wire : Polycab/ Havells/ Finolex/Plaza/Benlo c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit/PVC Casing Capping. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

One light point controlled by one switch

One ceiling fan/wall fan/exhaust fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5A flush type switch socket point on same board

M&L for concealed point wiring complete with 2.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame including one PVC insulated & unsheathed multistranded copper conductor 2.5 Sq. mm as earth continuity conductor connected to common earth dolly for single board having 1 x15 Amp switch socket point for independent board complete including required size and numbers moduler box and cover plate all as specified & directed. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, ISI marked, not less than 25mm PVC Conduit with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including required number and size of modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

M&L for submain wiring in repair with 2 runs of 10 sqmm and one run of 10 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

M&L for submain wiring in repair with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

M&L for sub-main wiring in repair with 4 runs of 10.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

S&F in repair LED recess mounted type fitting 36W 2'x2' CRCA LED Slim panel with recess mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified by Engr-in-Charge.

Supply and fixing in repair walll/surface mounted 20W LED batten fitting engineering plastic batten with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed by Engr-in-Charge. Make : CG/wipro/C&S cat No LTTB4F20WLEDEW BATTEN/Bajaj/Havells/Philips

Supply and fix in repair switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type

Supply and fix in repair switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type

Supply and fix in repair modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix in repair ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete

S&F for modular fan regulator fan step regulator, 120W - 2 modular step type Make: Roma/Legrand

S&F in replacement of steel sheet enclosure double door type IP54 IK09 protection DB SPN 8 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

S&F in replacement steel sheet enclosure double door type IP54 IK09 protection DB SPN 12 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 6 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand or Equivalent in siemens/GE

S & F in repair MCB SP 6 - 32 Amps, 10 KA Rupturing capacity

S & F in repair MCB SPN 40-63 Amps, 10 KA Rupturing capacity

Disconnecting & taking down old Unservicable cable & Supply laying & testing cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded copper conductor of size 25sqmm 4 core in trenches/along wall/floor etc incl required material for fixing arrangement complete all as specified and directed.

S&F for Rigid non-metallic PVC conduit 20mm dia with complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

S&F for Rigid non-metallic PVC conduit 32mm dia with complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

S&F for Rigid non-metallic PVC conduit 40mm dia with complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

S & F in repair MCCB 3P 100 Amps,16KA,thermal magnetic,415volts complete all as specified and directed. Make : Legrand cat No 420015/Seimens/GE

Supply and fixing of wall mounted fan 450 mm size complete all as specified and directed

Supply, fixing and testing of battery powered exit signage , 220-240v, 50Hz having 2w LED, operation hours of 3 hours, operating environmental temp ranging from -5 to 45 degree centigrade complete all as specified and directed . Note: Exit signage can be replaced with other directional signs as per site requirement.

Supply and fixing of battery powered surface mounted downlighter , 220-240v, 50Hz having 12x1.5w LED, operation hours of 3 hours, operating environmental temp ranging from -5 to 45 degree centigrade complete all as specified and directed.

Disconnecting & taking down old Unservicable cable & Supply laying & testing cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 100 volts grade with stranded copper conductor of size 35 sqmm 4 core in trenches/along wall/floor etc incl required material for fixing arrangement complete all as specified and directed.

Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed.

Supply and fixing of touch free infrared hand dryer with minimum 1150 watt, single phase complete all as specified and directed.

S& F in repair GI cable tray perforated type 2 mm thick of size 450x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with0.71mm thick aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter cable trucking for plain to be fixed on any wall (brick/stone) vertically/horizontally including all accessories complete bending,shaping,drilling,welding, cutting & all fixing arrangement complete etc all as directed