Repair renovation of Audit...

Amount

[10.1]Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. [Through Rate]

[10.50.1]Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. [Through Rate]

[10.51]Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. [Through Rate]

[10.60]Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. [Through Rate]

[10.62]Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. [Through Rate]

[10.63.2]Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm [Through Rate]

[10.67.2]Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm [Through Rate]

[10.70.2]Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 2. Size of Tile 600x600 mm [Through Rate]

[10.72]Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. [Through Rate]

[11.10.1]20 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand) [Through Rate]

[11.17]Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge [Through Rate]

[11.26.1]Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): 1. Flush/ Ruled/ Struck or weathered pointing [Through Rate]

[11.4.2]10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand) [Through Rate]

[11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate]

[11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) [Through Rate]

[11.64.1]Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. New work (two or more coats) over and including water thinnable priming coat with cement primer [Through Rate]

[11.8.2]12 mm cement plaster of mix : 2. 1:6 (1 cement: 6 coarse sand) [Through Rate]

[12.157.1.3]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.3. For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) [Through Rate]

[12.157.2.3]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.3. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) [Through Rate]

[12.158.2]Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides [Through Rate]

[12.159.2]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) [Through Rate]

[12.160.1]Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 1. With stainless steel cover plate minimum 1.25 mm thickness [Through Rate]

[12.164]Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. [Through Rate]

[12.167.3]Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge 3. Polyester powder coated minimum thickness 50 micron aluminium [Through Rate]

[12.37.1]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws [Through Rate]

[12.60.1]Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 1. 150 mm [Through Rate]

[13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate]

[13.3.2.2]Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 2.2. Profile C Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) [Through Rate]

[13.3.3.2]Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 3.2. Profile E Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) [Through Rate]

[13.5.3]Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 3. 10 x 120 mm [Through Rate]

[20.23.4]Extra for fixing and jointing union couplings in G.I. and W.I. pipelines. 4. 32 mm internal diameter [Through Rate]

[20.26.1]Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 1. 11.43 cm thick wall [Through Rate]

[20.26.2]Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 2. 22.86 cm thick wall [Through Rate]

[20.31.4]Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works. 4. 32 mm internal diametre [Through Rate]

[20.31.6]Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works. 6. 50 mm internal diametre [Through Rate]

[20.36]Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. [Through Rate]

[20.71.2]Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 2. 56" (1400mm) [Through Rate]

[20.72]Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. [Through Rate]

[21.100.4]Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 4. 150 mm dia pipe [Through Rate]

[22.103.3]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore [Through Rate]

[22.104.1]Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore [Through Rate]

[22.107.1]Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore [Through Rate]

[22.108.1]Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore [Through Rate]

[22.109]Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. [Through Rate]

[22.15]Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer-in-charge. [Through Rate]

[22.16]Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint [Through Rate]

[22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. [Through Rate]

[22.212.1.2]Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including cutting and making good the walls etc. 1.2. C.P Brass Two Way [Through Rate]

[22.22.1]Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests [Through Rate]

[22.221.11]Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. 11. Table Top (size 49 x 40 x 15 cm) [Through Rate]

[22.222.2.2]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete [Through Rate]

[22.222.2.3]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.3. Single Socket Type B 90mm o/d SWR UPVC pipe lines laid complete [Through Rate]

[22.26.1]Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 1. Single half stall urinal with 5 litre P.V.C. automatic flushing cistern [Through Rate]

[22.26.4]Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 4. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern [Through Rate]

[22.33]Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. [Through Rate]

[22.38]Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. [Through Rate]

[22.42.1]Providing and fixing toilet paper holder : 1. C.P. brass [Through Rate]

[22.50.1.2.1]Providing and fixing partitions for different type of urinals. 1.2.1. Vitreous Chinaware Partition plate. Large size 835mm x 355 mm White [Through Rate]

[22.85.4]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes [Through Rate]

[22.85.6]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 6. 50 mm nominal outer dia Pipes [Through Rate]

[22.86.2]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes [Through Rate]

[22.86.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes [Through Rate]

[23.1.6.1]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.1. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]

[23.1.6.3]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.3. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) [Through Rate]

[23.1.6.6]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.6. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]

[23.1.6.8]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.8. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 run of Size 4 Sqmm(1/2.24mm) [Through Rate]

[23.1.6.9]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.9. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 3 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]

[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA [Through Rate]

[23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) [Through Rate]

[23.22.4.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.7. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) [Through Rate]

[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate]

[23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE [Through Rate]

[23.23.10]MISCELLANEOUS 10. Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]

[23.23.6..2]MISCELLANEOUS 6..2. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 200 X 50 X 2 mm [Through Rate]

[23.23.6.3]MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm [Through Rate]

[23.23.7.2]MISCELLANEOUS 7.2. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 200 X 50 X 2 mm [Through Rate]

[23.23.7.3]MISCELLANEOUS 7.3. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 375 X 50 X 2 mm metre [Through Rate]

[23.4.1.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.2. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group B [Through Rate]

[23.4.4.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.2. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group B [Through Rate]

[23.4.5.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.2. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group B [Through Rate]

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]

[23.7.6.4]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.4. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 40 mm dia. [Through Rate]

[23.8.1.6]FITTING AND ACCESSORIES 1.6. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Call bell 220/230 volts musical type [Through Rate]

[23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data [Through Rate]

[23.8.10.2]FITTING AND ACCESSORIES 10.2. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules [Through Rate]

[23.8.10.4]FITTING AND ACCESSORIES 10.4. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules [Through Rate]

[23.8.10.6]FITTING AND ACCESSORIES 10.6. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 Modules [Through Rate]

[23.8.11.10]FITTING AND ACCESSORIES 11.10. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate [Through Rate]

[23.8.11.11]FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type [Through Rate]

[23.8.11.3]FITTING AND ACCESSORIES 11.3. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 1 way switch [Through Rate]

[23.8.11.5]FITTING AND ACCESSORIES 11.5. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket [Through Rate]

[23.8.11.7]FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt [Through Rate]

[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]

[28.16]Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured. [Through Rate]

[28.27]Providing and laying cinder concrete in cement 1:15 (1 cement and 15 cinder) on terraced roofs and (up to three Storeys), laid to slope, including consolidating the same. [Through Rate]

[30.17]Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. [Through Rate]

[30.18]Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. [Through Rate]

[30.20.1]Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for prefixed flat tile bricks on top of mud phaska : 1. With F.P.S. brick tiles [Through Rate]

[30.21]Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete [Through Rate]

[30.28.1]Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. One or more coats on old work [Through Rate]

[30.51]Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. [Through Rate]

[30.53.1.2]Replacing and fixing 25 mm thick shutters for cup board etc i/c disposal of dismantled shutters, if any: 1.2. Panelled or panelled & glazed shutters : Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. [Through Rate]

[30.54.1]Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 1. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) [Through Rate]

[31.2.2]Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 2. 50mm average thickness [Through Rate]

[31.3.1]Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 1. Bars up to 12 mm diameter [Through Rate]

[31.4.2]Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. 2. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make [Through Rate]

[31.7.3]Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. 3. 50 mm average thickness in 3 layers. [Through Rate]

[35.23]Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete [Through Rate]

[5.11]Demolishing mud phaska in terracing and disposal of material within 50 metres lead. [Through Rate]

[5.14]Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. [Through Rate]

[5.23.2]Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2. Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) [Through Rate]

[5.42]Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. [Through Rate]

[5.43.1]Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1. For thickness of tiles 10 mm to 25 mm [Through Rate]

[5.45]Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. [Through Rate]

[5.70]Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. [Through Rate]

[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.12.1]20 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded: 1. Vertical [Through Rate]

[6.12.2]20 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded: 2. Horizontal [Through Rate]

[6.14.1]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform [Through Rate]

[6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. [Through Rate]

[6.59.2.1]Providing and fixing sheet covering over expansion joints with iron screws as per design. 2.1. Aluminium fluted strips 3.15 mm thick. 150 mm wide [Through Rate]

[7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]

[8.26.2.2]Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade Area of slab over 0.50 sqm [Through Rate]

[9.11.1]10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 1. With common burnt clay non-modular brick tile of class designation 10 [Through Rate]

[9.17.1]Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase [Through Rate]

[9.18]Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. [Through Rate]

[9.32.1]Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated `J` or `L` hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 1. 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified [Through Rate]

[9.46.3]Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer`s specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 3. 12.5 mm thick tapered edge gypsum moisture resistant board [Through Rate]

[9.48]Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. [Through Rate]

[9.57.3]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter [Through Rate]

[9.58.1.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.3. Coupler 150 mm [Through Rate]

[9.58.5.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.3. Bend 87.5° 150 mm bend [Through Rate]

[9.59.3]Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 3. 150 mm [Through Rate]

NS items 138 to 333:- Supply installation testing and commissioning of wall free mounting dust and vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick backlite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 caot of zine/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rising, the panel having PU/Neoprene rubber gasket of not less than 3 mm thickness separate dectachable gland plate MS base channel hinged door with inter locking arrangement fo equipment/switch wear as per details.

Scraping of brick tiles of size 22.86cm x 11.43cm x 3.81cm in cement mortar, complete in all respect as directed by Engineer-In-charge

Providing and fixing PVC wall paneling consisting of 7mm thick cactus make hollow , PVC U-section beading of size 25mmx8mmx12mm and PVC angle nosing of size 25mm x 25mm x 1.5mm including cost of PVC gutties, screws, jointed with polyfix (instant glue), complete in all respect as per drawing or as directed by Engineer-in-Charge

Providing and fixing PVC elbow 3’’ i/dia (90 mm o/dia) of Prince/Supreme/Skipper make

Providing and fixing cowl of size 90 mm o/dia (3`` i/dia) of PRINCE/SUPREME/SKIPPER make.

Supply of PVC specials of PRINCE/ SUPREME/ SKIPPER make Door junction 3`` x 3`` x3``

Supplying, installation, testing and Commissioning of recessed type = 42 watt Full window glare free opal Diffuse LED Panel of size 595 X 595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated White Housing. Total system Lumen of 42 watt LED should be 5100 or above in cool dry light (5700 K), Power factor = 0.95, CRI (Ra) = 80, LED lamp efficiency = 140 lm/w, Average life ) 50000 hours. Complete with all accessories as required with connections. Make:-Philips, Bajaj (industrial), Havells

Collection of Ist class flat brick tiles at the site of work including carriage, loading, unloading and stacking etc., confirming to Haryana PWD Specification No. 3.6 (c), complete in all respect.

Supply of CPVC Control valves/ ball valve with brass internals of PRINCE/ SUPREME/ SKIPPER make 50 mm o/dia

Supply of CPVC Control valves/ ball valve with brass internals of PRINCE/ SUPREME/ SKIPPER make 32 mm o/dia

Supply of CPVC union coupling with brass internals of Prince/ Supreme/ Skipper make 50 mm dia

Supply of CPVC union coupling with brass internals of PRINCE/ SUPREME/ SKIPPER make 32 mm nominal outer dia

Providing and fixing of PVC Floor Trap 3’’ i/dia (90 mm o/dia) outlet of PRINCE/ SUPREME/ SKIPPER make

Supply of PVC Gully Trap (Heavy duty) of 100 mm dia size 4’’ i/dia with cover and frame of PRINCE/ SUPREME/ SKIPPER make

Providing and fixing PVC elbow 4’’ i/dia size of Prince/Supreme/Skipper make

Providing and fixing wall panneling (on wall) consisting of following:- Frame work:- Consisiting of factory manufactured G.I Channel of size 43 mm x 15 CM x 0.8mm fixed horizontally @ 2`-00` C/C with rawl plugs/screws on wall. (a) 12mm thick WPC Board (ISI Mark) of approved make fixed on G.I channel frame. (b) Top portion:- Consisting of 0`-6` wide strips of 1mm thick plastic laminated sheet (ISI mark) of approved make, shade and colour with 1/8` groove fixed on WPC board. Beading:- Beading of Size 0`-21/4 x 0`-13/4 of commerical hard wood such as champs, chikrasy, and chaplash at top. Including the cost of sprit polishing, rawl plugs, nails, screws etc., complete in all respect as per architectural drawing and design.

Providing and fixing PVC Door Junction/Tee specials of PRINCE/SKIPPER/SUPREME Make of Size 4` X 4` X 4` complete in all respect as directed and up to the satisfaction of Engineer-in-Charge.

Providing and fixing cowl of size 100 mm o/dia (4`` i/dia) of PRINCE/SUPREME/SKIPPER make.

Providing and fixing CP Brass Pillar Tap of JAGUAR make Model No. KUP-35021 PM with 110MM Extension Body complete in all respect as directed and up to the entire satisfaction of Engineer-in-Charge.

Providing and fixing mirror/ glass 5.5 mm thick mounted on asbestos sheet ground fixed in position by means of 4 Nos. CP brass screws and washers, rubber washer and rawl plugs embedded in wall or CP brass clamps with CP brass screws and wooden frame as required by the Engineer-in-charge, complete. Make:- SAINT GOBIAN/ ATUL/ MODI

Dismantling/removing of existing tarfelt from the roof and disposal of rubbish with a lead of 2 KM complete in all respect as directed by the Engineer-in-Charge.

Providing and fixing 15mm to 18mm thick granite stone (Polished) fixed on existing wooden worktop/surface with fevitite/areladite or any approved adhesive laid in any pattern as specified and jointed with white cement slurry mixed with pigment to match the shade including rubbing and polishing, compete as directed and up to the satisfaction of Engineer-in-Charge.

Providing and fixing Aluminium framework 600mm c/c both ways for wall panelling as per design drawing consisting of aluminium tubular sections of size 50x38mm having thickness not less than 2mm. The frame is to be fixed to the walls by means of angle holdfasts of suitable length out of 35x35x4mm MS/Aluminium angle duly given red-oxide and paint complete with expandable anchor fasteners of 65x10mm dia fixed o @1200mm C/C both ways. The framework shall be executed as per the drawings, specifications and instructions of the engineer in charge.

Providing and fixing of the sound acoustic baffle consisting of high density 1.8 mm thick layer of polymer-based visco elastic synthetic acoustic membrane asphalt free having a density of 2000 kg /cum infused in 20mm thick 450 kg /cum density wood wool board with cement platered surfaces. The joints are to be finally sealed with manufacturer-approved putty. Complete as per drawings and instructions of the engineer in charge.

Providing and fixing of stretch Fabric Acoustic Panelling with Inherently Fire retardant fabric The fabric is to be stretched using UPVC grippers provided @ 1200mmc/c or wherever required as per the design drawing complete with top, bottom and End. The Gripper is to be fixed over 12mm com ply. The Fabric to be gapped with Fire Retardant Melamine Foam ( Supreme). The foam is to be glued over the perforated 12mm BWR ply (IS303) fixed over the GI framework ( Ply and GI framework paid separately in items 6 and 8.) T Including finishing the edges as required. The work to be done complete as per the design and instructions of the engineer in charge including accessories as required.

Providing and laying of 50mm thick 1200GSM Non woven thermal bonded polyester wadding to be laid in the cavity behind wall paneling including fixing 24Guage chicken mesh jali complete in all respect and to the entire satisfaction of the Engineer-in-charge. ( Note: The Contractor to submit Manufacturing Test Certificate)

Providing and fixing frame work of galvanized iron for ceiling curved in plan / section / as well as plain ceiling for suspended false ceiling which includes galvanised iron perimeter chanels of size 27 mm and 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / R.C.C. / partition with the help of rawal plugs and screws, suspending galvanized iron intermediate chanels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanized iron hanger of size 25 mm x 25mm with fasteners, ceiling section of 0.5 mm thickness having size of 80 x 25 x 51 mm and made from hot deep galvanized sheet fixed to the intermediate chanel with the help of connecting clips and direction perpendicular to the intermediate channels at 450 mm centers. 12.5 mm dry walls screws at 230 mm centers, fixing screws mechanically either with screw diver or drilling machine with suitable attachement including scaffolding at all heights etc. completed as per directions of Engineer-in-charge. Including MS Pipe Cup Scaffolding upto any height including material cost and cost of erection meant for false ceiling a as per the profile of the ceiling complete in all respect.(Make: India Gypsum, Saint Gobain, Boral)

Providing and fixing in position an Acoustic Ceiling made from seamless Rigitone 8/18 over an existing GI/AL frame, including the cost of required Cut-Outs, as per the Architectural and Acoustic Design and instructions, and Completing it in all aspects as directed by the engineer in charge.(Make: India Gypsum, Saint Gobain, Knauf.)

Providing and fixing of the sound acoustic baffle consisting of high density 1.8 mm thick layer of polymer-based visco elastic synthetic acoustic membrane asphalt free having a density of 2000 kg /cum infused in 20mm thick 450 kg /cum density wood wool board with cement plastered surfaces. The joints to be finally sealed with manufacturer-approved putty. Complete as per drawings and instructions of the engineer in charge. (For Ceiling)

Providing woodwork in frames made out of 50x 50mm Sal wood battens fixed at 600mm c/c as per drawing complete. The battens should be treated with anti-termite, as directed and up to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of 2 No. staggered layers 12mm thick marine ply IS710 of approved make like century, Duro, Green Merino, fixed to Sal wood framework of size 600 mm c/c both ways ( Sal wood Framework to be Paid separately). The sal wood framework to be supported on 50x150x5mm neoprene pads and held in position by 35x35x5 mm angle cleats of 150mm length at 1200 mm centres. The wooden framework to be filled with 25mm thick thermal bonded polyester wadding mikron fiber of 800 gm/sqm (Make:Nowofill) held in position with 18mm 24 SWG chicken mesh fixed on the bottom of the wooden framework with necessary screws and washers. The cleats to be given two or more coats of zinc chromate primer. The work shall be executed as per the drawings, specifications and instructions of the engineer in charge.

Providing and fixing in Position Solid Hardwood flooring with plank thickness of not less than 22 mm, width not less than 120mm and length not less than 1830 mm(Except at wall end) from reputed manufacturer. The flooring shall be fixed with a tongue and groove interlocking system with clip method/(Synthetic adhesive).Two planks are joined with the help of a stainless steel clip/(Synthetic adhesive) to ensure control of expansion during climatic changes. Installation is done over 4 mm thick expanded polyethylene foam sheets to give cushioning effect, over the prepared surface with necessary skirting of the same material as of flooring. The Aluminum Anodised matching Color Transition profiles and Nosing`s to be fixed wherever required. The planks are factory-polished in lacquer. A uniform gap of 12 mm is to be maintained all around the wooden flooring to allow for expansion due to climatic change Flooring should have environmentally friendly certification of Forest Steward Council (FSC). The moisture content shall not exceed B 0,6 and Fire classification shall be Cfl-S1 Category (DIN EN 13501-1), all complete as per the direction of the Engineer in charge. (JUNKERS, DENMARK / BARBOSA PORTUGAL / CASTRO, EUROPE)

Providing and applying polyurethane polish over wooden floor including grinding of the floor complete as per manufacturer`s specifications. (NS)

Providing and fixing of acoustical channelled wood acoustical paneling with perforation as per detailed drawings including acoustical fleece at the back complete in all respects and to the entire satisfaction of Engineer-in- Charge

Providing and Fixing of Flocked floor covering rolls or equivalent having a density of 70 million fibers of nylon 6.6 per M2, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing, anti-allergic certified by British allergy foundation, anti-static, thickness 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The reaction to fire should be as per EN 13501-1: Bfl-s1. shade as approved by the client and installed by the approved applicator of the manufacturer. Flocked flooring should be installed over cement-based compound available within India.

Providing and fixing in a position, 1000 x 50 x 25 mm L shape Auto-Glow Aluminum extruded strips on Auditorium steps as per detailed Architectural - Acoustical design and drawings etc. and as per direction of Engineer-in-charge/Architect. (Make: Prolite, Decon )

Supply Installation Testing and commissioning of 535 mmc/c Fire Retardant fabric upholstered chair conforming to BIFMA standards. The chair to have MS tubular framework welded together with continuous arc welding. The chair shall have powder coating of 65 microns on all of the MS tubular framework. The seat shall have Polyurethane foam of density 55 plus 3 KG/Cum and Back to have density of 50 plus 3 Kg/CuM. The height of the back to be 950-1000mm from the ground to top of back and for Seat to be 400-450mm from the ground. The rear of back shell and bottom of seat shell to be Polypropylene plastic in black colour Polypropylene plastic cover. The wooden armrest to be of 80mm and 400mm length with melamine polished in black colour. The armrest between two chairs in a row to be shared and at the both ends to be individual. Including cost of suitable chemical expansion fasteners as required of Hilti/Fischer make. Make Penworkers/ Featherlite /Godrej.

SITC of Fire retardant velvette fabric 500 GSM 200% gathering for Grand drape with approved colour duly stitched and with eyelets. Size: 13.5M X 4.5M Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric, 350 GSM100% gathering for Rear Curtain with approved colour duly stitched and with eyelets. Size: 8M X 4.5M Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric 350 GSM for wings duly stitched wrapped all around with 0% gathering. Size: 4M X 1.5M on both sides Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric 350 GSM100% gathering for frill with approved colour duly stitched and with eyelets. Size: 8.10M X 1.00M Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant velvette fabric 500 GSM 200% (2 times of the finished dimension) gathering for main valance with approved colour duly stitched of Size: 14M X 1.00M. Fabric Make : Reliance /Nexgen/Innovative/Raymonds

L type Wall Bench Size: L 6090 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-1)- Includes as following: 05 No`s C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction- 01 No`s 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm)- 01 No`s L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications.- 03 No`s 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications.- 02 No`s 750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter- 02 No`s 750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher- 02 No`s Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm- 02 No`s Worktop mounted three way water tap with swan neck spout brass epoxy coated- 02 No`s Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs- 05 No`s Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete etc (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specification provided in the bid document.

1No.Wall Bench Size: L9000 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-2) 7Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 3Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 7Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher 2Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 10Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 10Nos.- 6 Module electrical plate complete including wiring (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specification provided in the bid document.

1No.Wall Bench Size: L1200 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-3) 2Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 2Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes)· 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

1No.Wall Bench Size: L3845 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-4) 4Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 3Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 5Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 5Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

1Nos.ISLAND Bench Size: L 2350 ±10 mm x W 1500±10 mm x H 880±10 mm (ISLAND BENCH-1) 6Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 4Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 4Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

1Nos.ISLAND Bench Size: L 3850 ±10 mm x W 1500±10 mm x H 880±10 mm (ISLAND BENCH-2) 8Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 6Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 8Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomeclature may be read in conjunction with specification provided in the bid document.

1Nos.Chemical Storage Cabinet (CSC) Size: L 1000 ±50 x D 460±50 x H 1800±50mm 1Nos.- 304 ±10 mm Chemical Storage Cabinet with two shutters with 5mm glass view in shutter. Note: It is used for storages of corrosive chemicals. It must be provided with a proper ventilation system with 5mm 6inch PPFRP/PVC duct to enable exhaust of localized fumes from chemicals. The main frame should be made from 1.6mm sheet metal and body in 1.2 mm GI sheet with pure epoxy powder coating. Cabinets should have adjustable slotted profile in the back and front side for adjustable shelves. Cabinet should have three no. of 12mm thick phenolic resin high pressure laminate sheets/10mm PP sheet with pigeon hole perforations. It must be fitted with a float glass to enable visibility inside the cabinet. The overall dimensions are 1000 x 486 x 1800 mm (W x D x H) or equivalent as per the site requirements. Each shutter of cabinet should be fitted on 4 nos. of SS 304 1.6mm butt hinges. All the joints and crevices duly sealed with epoxy resin/silicon as per the approved design and layout applicable. NOTE: Above nomemclature may be read in conjunction with specifications provided in the bid document.

Agronomy Lab No.208 1Nos.ISLAND Bench Size: L 4450 ±10 mm x W 1500±10 mm x H 890±10 mm (ISLAND BENCH-1) 8Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 6Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 4Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets- ( Reagent Rack is 1500mm. 2 Nos. and Reagent Rack is 1350mm. 1 Nos.) 12Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Agronomy Lab No.208 1Nos.U-Type Wall Bench Size: L 12780 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-1) 11Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 3Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 5Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 3Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 6Nos.- 600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 15Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 15Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Agronomy Lab No.208 1Nos.L- Type Wall Bench Size: L 8190 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-2) 7Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.- 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 1Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 3Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 9Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 9Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Agronomy Lab No.208 1Nos.Wall Bench Size: L 3400 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-4) 4Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 1Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 3Nos.- 600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 5Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 5Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Lab No.216 1No.L-Type Wall Bench Size: L 11040 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-1) 9Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.- 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 2Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 3Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 5Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.- 600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 12Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 12Nos.- 6 Module electrical plate complete including wiring (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Lab No.216 1Nos.Wall Bench Size: L 4750 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-2) 5Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 1Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.- 600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 5Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 5Nos.- Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) ) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Lab No.216 1No.Wall Bench Size: L 1500 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-3) 2Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.- 600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 2Nos.- Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Lab No.216 1Nos.ISLAND Bench Size: L 4600±10 mm x W 1500±10 mm x H 890 ±10mm (ISLANDBench-1) 8Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 8Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 12Nos.- Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Entomology PG Lab 1Nos.U- Type Wall Bench Size: L 19680 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 15Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 11Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 3Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 5Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 7Nos.- 750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.- 600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 1Nos.- 600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 1Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 1Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 23Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 23Nos.- Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Entomology PG Lab 2Nos.ISLAND Bench Size: L 3400±10 mm x W 1500±10 mm x H 900±10 mm (ISLANDBENCH-1) Includes following: 8Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 8Nos.- Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Entomology UG Lab 1Nos.U- Type Wall Bench Size: L 21280 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 16Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 8Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 7Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 4Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 4Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 5Nos.- 750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 4Nos.- 600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.- 750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 25Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 25Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Entomology UG Lab 2Nos.ISLAND Bench Size: L 4166±10 mm x W 1166±10 mm x H 890±10 mm (ISLAND BENCH-1) 4Nos.- D-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 8Nos.- 450 ±10 mm wide storage module with one drawer one shutters NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 177 1Nos.Wall Bench Size: L 9100 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) Includes as follows: 8Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 3Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 4Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.- 600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Peg 11Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 11Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) - 5 Amp electrical sockets – 1 nos.- 15 Amp electrical sockets -1 nos.- 5 Amp electrical switch – 1 nos.- 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 177 2Nos.ISLAND Bench Size: L 5250±10 mm x W 1500±10 mm x H 900±10 mm (ISLANDBench-1) Includes as follows: 14Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 10Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 8Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 5Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 20Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specification provided in the bid document.

Plant Pathology Lab No. 276 1Nos.L-TypeWall Bench Size: L 9690 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) Includes as follows: 8Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.- 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm)3Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications .3Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications .4Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 12Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 12Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 276 1Nos.L-Type Wall Bench Size: L 7590 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-2) 6Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.- 850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 3Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications .2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 9Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 9Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos.NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 276 1Nos.Wall Bench Size: L 1950 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-3) 3Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher.2Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 2Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 2Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid documents.

Plant Pathology Lab No. 276 1Nos.ISLAND Bench Size: L 3850±10 mm x W 1500±10 mm x H 900±10 mm (ISLAND Bench-1) 8Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 6Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 8Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 276 1Nos.Wall Bench Size: L 4500 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-4) 4Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 4Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 6Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 6Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Forestory Lab 1Nos. Wall Bench Size: L 7800 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 7Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 6Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 11Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 11Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

Forestory Lab 2Nos.ISLAND Bench Size: L 2800±10 mm x W 1500±10 mm x H 900±10 mm (ISLAND Bench-1) Includes as follows: 6Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.- L -600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.- Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 1Nos.- Worktop mounted three way water tap with swan neck spout brass epoxy coated 1Nos.- Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 2Nos.- Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets- (Reagent Rack 1500mm. 1 Nos. and Reagent Rack 1200mm. 1 Nos.) 8Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Forestory Lab 1Nos.Wall Bench Size: L 750 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-4) 2Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 1Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

AAS Lab No. 207 1Nos.Wall Bench Size: L 4800 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 5Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- L -600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.- 750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 7Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 7Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

AAS Lab No. 207 1Nos.Wall Bench Size: L 1800 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 3Nos.- C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.- L -600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.- 600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.- 750 ±10 mm Overhood wall cabinet with two shutters with 5mm glass view in shutter 3Nos.- Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 3Nos.- 6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

Supply Installation testing and commissioning of 48 Port POE Access Switch with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support having following technical specifications: Switch architecture should be Fixed Form factor/ stackable based. Switch should have wire-speed, non-blocking and fanlessdesigne Architecture, Switch should have minimum of 48 x 10/100/1000 Mbps RJ45 ports and additional 4 SFP plus (1G/10G) fiber based ports, Minimum 2 port Populated with 10G MMF, Switch should have minimum of 136 Gbps or more data switching capacity and 95 Mpps or more forwarding throughput, Access Switch should have stacking capability with minimum stacking bandwidth of 40Gbps and should support a minimum of 8 units in a stack Minimum one meter Stacking cables should be included in supplied material, Switch should support min 16 K MAC addresses and min 4000 active VLANS, Switch should have full Layer 2 features like STP, RSTP, MSTP/PVST,LACP/IEEE802.3ad, ACL, QoS and IGMPv1/v2/v3, Switch should have Static Routing for IPv4 and IPv6, Access Switch should be upgradable to support advance Layer 3 features like, RIPv1/v2, OSPF v2, OSPFv3, and HSRP/VRRP in future with an additional software license upgrade, Should support 4K IGMP Groups, Should support 8 queues per port and security protocols like RADIUS, TACACS/TACACS plus , AAA and SSH, Switch should be quoted with 3 years direct OEM TAC support and Next Business day hardware shipment, Proposed switch should be IPv6 logo certified, including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE: BROCADE/CISCO/HP

S/E of Propeller type AC ventalating fans ( exhaust fan ) with necessary earthing of fan complete with louver shutter , 380mm sweep 900RPM ( Heavy Duty ) Make Orient , Usha , Khaitan , Crompton ( NS )

S/I/T/C of push ON/OFF type 25 A modular type motor starter switch (white colour) for AC’s including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge (NS)

Supplying and fixing of cooper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect . 31.64

Supply and erection of underground cable loose in existing pipe 4X25Sqmm (unarmoured)

Supply and erection of underground cable loose in existing pipe 4X16Sqmm (unarmoured)

supply Installation testing and commissioning of 24Port loaded Straight Jack pannel, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE: DLINK/AMP/RandM Engineer In Charge.MAKE: DLINK/AMP/RandM

Supply Installation testing and commissioning of Horizontal PVC Cable Manager - U, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE: DLINK/AMP/RandM

Supply Installation testing and commissioning of 12U Wall Mount rack with front glass door lockable, Fans 90 Cfm 230 Vac, PDU Horizontal 5Amp with 6 Schokets, Cantilever Tray-IU, Horizontal PVC Cable Manager and Hardware front panel Mtg. including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

S/E of 20 watt 2 feet LED fitting with 100 Lumens per watt power factor more than 0.95 ,average life 50000 hrs, with connections and entire satisfaction of engineer in charge of the work. (bajaj, havells, crompton)

Supply Installation testing and commissioning of Category 6 Patch Cord 7feet, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/AMP/Molex/belden

Supply Installation testing and commissioning of 24 Port POE Access Switch with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications : Switch should offer Wire-Speed and Non-Blocking Switching with 24 10/100/1000 RJ45 PoE/PoE plus Ethernet ports and additional 4 SFP plus (1G/10G ) fiber based ports, Minimum 2 port .Access Switches should support non-blocking switching fabric capacity of minimum 88 Gbps and minimum line-rate forwarding capacity of 57 Mpps. Access switch should support minimum 16K MAC addresses and minimum 4K active VLANs.Access Switch should have stacking capability with minimum stacking bandwidth of 40Gbps and should support a minimum of 8 units in a stack from day one. Access switch should support up to 8 hardware queues per portAccess Switch should support full Layer 2 features like STP, RSTP, LACP, ACL, QoS, IGMP v1/v2 from day 1. Access Switch should support basic L3 features like IPv4 and IPv6 static routing, Layer 3/4 ACLs, ECMP, virtual interfaces and routed interfaces from day 1. Access Switch should be upgradable to support advance Layer 3 features like, RIPv1/v2, OSPF v2, OSPFv3, and HSRP/VRRP in future with an additional software license upgrade.Access Switch should support minimum 1K IPv4 routes. The Access Switch should support IPv6 management features like IPv6 ping, IPv6 trace route, IPv6 Telnet, IPv6 TACACS, IPv6 and IPv6 RADIUS.All Switches and Transceivers should be of same OEM make.Access switch should support minimum 4K ACL rules ACL per Switch. Access switch should support SNMP v1/v2/v3, SSH, NTP and web management Access switch should have 1G of RAM and 2G of Flash Memory. MAKE : RUCKUS/CISCO/HP

Supply and Erection of underground cable 4 Core * 300sqmm Aluminium Armoured XLPE cable Laying loose in existing pipe / trenches etc. complete in all respect upto entire satis faction of EIC. Make Havells , Kei , LS Power , Finolex , CCI.

S/E of trenchless boring of road by HDD machine for laying required size of HDPE pipe 6` with socket reducer as per dia of cable at the end of pipe to closed the end of pipe to avoid entering of sand in pipe and all petty material required to complete the job as per entire satisfaction of the EIC.( Cost of 6` HDPE Pipe with socket and reducer including in the Cost )

`MOTORISED TAB TENSIONED SCREEN :- Supply,Installation, Testing and Commissioning of Motorized Tab- Tensioned Projection Screen, size 177`` H x 284`` W (335`` Diagonal , Matte White Fabric, Total Top Drop: 12`` Black, 16:10 Wide Format with remote control, voltage - 220volts etc. complete with installation as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC. . Make/Model: DRAPER(USA)/DALITE(USA)HARKNESS(UK)`

Supply, Installation, Testing and Commissioning meatl interactive podium with 21.5” or higher touch screen colour display (make - Wacom / Elo Touch ), Motorized panel angle position with up-down, Wooden/metal Top, sliding tray to protect, sliding shelf with electronic lock, Door lock and RFID Locks, provision for gooseneck microphone (Shure/ Sennheiser /Beyerdynamic) Ports- HDMI, VGA, audio, Network, USB, mic, front USB, 2X 5Amp power points, Internal rack space for PC etc complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC. . Make : AHA/ MTS/ MASS

Supplying, installation, testing and commissioning of IP 4K Pan-Tilt-Zoom PTZ Camera with NDI®|HX capability, PTZ Camera Capable of handling IP Video Resolution: 3840 x 2160 @30FPS or better, high quality CCD/CMOS sensor ,20 x or more Optical zoom, Pan range: ±160 degree, tilt range:(-) 20 deg to 90 deg, Auto focus, with HD-SDI, HDMI , 256 or more preset position Built-in complete as per specification as required. etc., complete with site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make :- Panasonic/ Sony/ Canon

Supply, Installation, Testing and Commissioning of twisted pair HDMI transmitter and receiver set for camera signal extension having HDMI, power and control extension. Upto 4K resolution support, transmission distance supported upto 100m. Should be HDCP 2.3 Compliant. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. etc complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning ofPicture in Picture (PIP) processor supporting minimum 01 VGA input, 03 HDMI inputs. one or more HDMI output. All inputs and outputs shall supoort 1080p resolution or higher. Shall provide two window picture-in-picture (PIP) with programable preset options. Shall feature built in high quality scaling with aspect Ratio Control. Should have EDID management feature and HDCP Compliant. Controls: Front button panel, RS232, Ethernet. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. etc complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of All in one Scaling Presentation Matrix Switcher with twisted pair Extension, 4K resolution, Scaling on twisted pair output or provided with Scaing receivers. , 2x STP input, 6x HDMI input, 2x STP output, 2x HDMI output, Built-in amplifier . Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of twisted pair transmitter having HDMI, Audio and Control. Inputs: 1xHDMI, 1xAnalog Audio, 1xControls (RS 232/IR), Outputs: 1 x Twisted pair/ HDbaseT on RJ 45, 4K resolution, transmission distance: Minimum 100m. Should be HDCP 2.3 Compliant. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of twisted pair Receiver having HDMI, Audio and Control. Inputs: 1 x Twisted pair/ HDbaseT on RJ 45, Outputs: 1xHDMI, 1xanalog audio, 1x RS-232/IR, 4K resolution, transmission distance: minimum 100m. Should be HDCP 2.3 Compliant. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of, high-performance control processor designed for centralized AV control in mid-sized applications. It is engineered to be faster and more secure in almost every way. It features advanced security standards and Gigabit Ethernet, which ensures compatibility with multiple TouchLink Pro touchpanels , Onboard 512MB RAM and 4.5GB Flash memory, One RS232/422/485 COM port with hardware and software handshaking, Six RS-232 COM ports(internal/external), Eight IR/serial, eight relay, and four or more Digital I/O ports, Programmable event scheduling etc. all complete. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of HDMI to HDMI scaler with scaled resolution upto 4K/60 Hz, 4:4:4. HDCP 2.3 compliant, HDCP and EDID management, RS-232, USB control, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supplying, installation, testing and commissioning of Fully Programmable IPAD 10` touchscreen interface for switching and control of AV equipment. TFT Active matrix Color LCD display, Resolution FULL HDr, Viewing angle: ±80° horizontal, ±80° vertical or more, Touch screen. Memory: 128 GB Flash, WIFI. Shall be supplied with Powere supply or POE Inejctor. Shall meet regulatory compliance, technical specifications. complete with control software and programming to control all th actice AV devices wirelessly, lauout as per EIC ,complete with case and installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : IPAD

Supply, Installation, Testing and Commissioning of 24 Port Full Duplex 10/100/1000Mbps Auto-Negotiation RJ45 network switch, Fanless architecture, Standards and Protocols IEEE 802.3 / 802.3u / 802.3ab/ 802.3x /802.1p to be supplied along with Built-in or external power supply, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : cisco/comscope(brocade)/HP

Supply, Installation, Testing and Commissioning of 6` (1.8 m) HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, resolution support of 4K/UHD @ 60 Hz, 4:4:4 or better, Gold plated connectors, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of Flexible Male to Male 15-pin HD VGA cable with Audio (06 feet) for transmission of VGA video and analog audio signals, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of 1000` (305 m) 24 AWG Shielded Twisted Pair Cable with SF/UTP construction and certified for minimum 450 MHz bandwidth at distance of 100 m, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of Shielded RJ 45 connectors of same make. Shall Provide Conductor alignment guide for reduce crosstalk and signal interference. Shall support Shielding for EMI/RFI environments, metal strain relief. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of 42 U Equipment Rack, Locakable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units and equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : MTS/ VALRACK

Supply, Installation, Testing and Commissioning of other cables, connectors, convertors etc as required for complete installation, programming and comissioning of the system etc.,. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.

Supply, installation, testing and Commissioning of stage left cluster having 14` or dual 10` or better LF driver and multiple MF/HF drivers (More than 4), Bi-amplified 2 or 3 Way array loudspeaker system, with Individual Module free field Frequency Range (-10dB) of 60Hz - 18kHz or better and Continuous Power Handling of )= 600W LF plus 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF)= 130 or better. It should have a Horizontal near dispersion pattern of 100º or better, vertical dispersion of the array shall be 60 degrees or better. The Modules shall be of Baltic birch plywood construction with internal metal bracing. All OEMs shall offer a suitable number of modules to achieve the required vertical angle (Minimum of 2 array modules) including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and Commissioning of OEM flying array frame and other necessary hardware for suspending main speaker arrays. All necessary hardware to be included to achieve a safety factor of 8:1 or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and Commissioning of a single 18` subwoofer. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 28 Hz - 200Hz or better. It should have an axial Sensitivity of ) = 92dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of )=127 db or better. The loudspeaker should have a nominal impedance: 4/8 ohm and continuous Power Handling of 750W or more: Complete with installation accessories as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC..Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and commissioning of a two-way 8 to 10` LF, or better high SPL stage monitor loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 80Hz - 18 kHz or better: Nominal Dispersion : 90°H x 60°V or better: Power handling of 800W peak or more: Sensitivity : 92 dB or better: Max SPL : 122dB Peak or more with a Nominal impedence of 8 ohms. Standard accessories shall be included including all petty material required to complete the job upto entire satisfaction of EIC.Make : Bose / L Acoustics / DandB Audiotechnik

SITC of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms, or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD plus N of (0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Bose / L Acoustics / DandB Audiotechnik

Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz: THD (0.3%: Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs including all petty material required to complete the job upto entire satisfaction of EIC..Make : Bose / Extron / Biamp

SITC of wireless handheld microphone with (UHF) Diversity receiver ,12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Cardioid , Carrier frequency range 500Mhz to 865Mhz , Frequency response 45–15kHz, Mute Button on Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Transmitter , Receiver dynamic range 106 dB (A-weighted) Or better, switching bandwidth Minimum 40 Mhz Or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of wireless Lapel microphone, with (UHF) Diversity receiver ,12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Omnidirectional, Carrier frequency range 500Mhz to 865Mhz, Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr , Should have Charging Contact in Body pack Transmitter, Receiver dynamic range 106dB (A-weighted) switching bandwidth Minimum 40Mhz Or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of wireless Headword microphone with (UHF) Diversity receiver,12 Channel Present or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Supercardioid, Carrier frequency range 500Mhz to 865Mhz , Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr, Should have Charging Contact in Transmitter, Receiver dynamic range 106 dB (A-weighted) Or better, switching bandwidth Minimum 40mHz Mhz Or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of 6-way wideband antenna splitter for wireless systems with BNC-connector, 8V DC bias with range of 470 to 832 MHz. including all petty material required to complete the job upto entire satisfaction of EIC. Make : Beyerdynamic / Sennheiser / Shure

SITC of Passive omnidirectional wideband antenna, for wireless systems with BNC connector, incl. stand adaptor including all petty material required to complete the job upto entire satisfaction of EIC. . Make Beyerdynamic / Sennheiser / Shure

SITC of Wideband antenna amplifier for wireless systems with BNC connector, 5 dB/ 10 dB/ 15 dB switchable gain, feeding from antenna cable or external power supply . Make : Beyerdynamic / Sennheiser / Shure

SITC of Mounting kit for Antenna including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Beyerdynamic / Sennheiser / Shure

SITC of Antenna Cable 25m. including all petty material required to complete the job upto entire satisfaction of EIC. Make : Beyerdynamic / Sennheiser / Shure

SITC of Wired Vocal Microphone with On/Off switch, Transducer type: Dynamic, Polar pattern: Cardioid, Frequency response: 50 - 17,000 Hz, Open circuit voltage : 2.4 mV/Pa (-52.5 dBV) ±3 dB, Nominal impedance 600 O, Connection: XLR, 3-pin, male, etc. complete with installation as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of Instrument Microphone with high-frequency reproduction Polar Pattern: Cardioid, Frequency response : 33-19,000 Hz, Open circuit voltage : 2.7 mV/Pa (-51.4 dBV), Nominal impedance : 600 O, Load impedance : = 2 kO, Connection : XLR, 3-pin, male, etc. complete with installation as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of drum microphone set consisting of 7 microphones, incl. microphone clamps and rugged softbag including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of headphone, closed systems, Transducer type: Dynamic, Nominal frequency response: .5-35,000Hz, Nominal impedance : 80O, straight single sided cable 3 m (9.8 ft.) with stereo mini-jack / 1/4` adapter including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Beyerdynamic / Sennheiser / Shure

Supply, installation, testing and commissioning of Digital Audio Mixer with 32-40 input Digital Mixing Console and USB Interface and 32 programmable Preamps, 24 or better Motorized Faders, 40 DSP input channels (32 mono inputs and 4 stereo channels/returns), Channel LCD`s, FireWire/USB Audio Interface and iPad/iPhone* Remote Control include I/O Box with 16 Remote-Controllable Preamps, Including Mini Stagebox 16 or 32 Channel combine high-quality components with a streamlined design, making it easy to add multiple channels of remote- controlled I/O toDigital mixing console. Complete in all respect as desired by the Engineer in charge of work at site along with mic box, Complete in all respect as desired by the Engineer in charge of work at site.including all petty material required to complete the job upto entire satisfaction of EIC. Make: Yamaha / Allen and Heath / Digico

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid and other rigging systems including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of C Profile MS Hot rolled strips 3mm thick with Added U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paintincluding all petty material required to complete the job upto entire satisfaction of EIC. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc. including all petty material required to complete the job upto entire satisfaction of EIC.Make : Leksa Lighting / Seimens / Aultra Lighting

SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. including all petty material required to complete the job upto entire satisfaction of EIC. Make : Polycab / Walna / SBEE

SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. including all petty material required to complete the job upto entire satisfaction of EIC.Make : Polycab / Walna / SBEE

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:11 Mtr x 5.5 Mtr.including all petty material required to complete the job upto entire satisfaction of EIC. Make : Om Phile / Nexgen / Comrade

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 11Mtr x 5.5Mtr. including all petty material required to complete the job upto entire satisfaction of EIC.Make : Om Phile / Nexgen / Comrade

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies including all petty material required to complete the job upto entire satisfaction of EIC. (For Frills) Size: 11 Mtr x 1.5 Mtr. Make : Om Phile / Nexgen / Comrade

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies including all petty material required to complete the job upto entire satisfaction of EIC. (For Frills) Size: 10 Mtr x 1.5 Mtr. Make : Om Phile / Nexgen / Comrade

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies including all petty material required to complete the job upto entire satisfaction of EIC. (For Main Valance) Size: 12 Mtr x 2 Mtr.Make : Om Phile / Nexgen / Comrade

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. including all petty material required to complete the job upto entire satisfaction of EIC.(For Wing) 7.5 Mtr x 1.5Mtr Make : Om Phile / Nexgen / Comrade

SITC of On Stage Fixed Frill Bar 11 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free.including all petty material required to complete the job upto entire satisfaction of EIC. Make : Leksa Lighting / Seimens / Aultra Lighting

SITC of On Stage Fixed Frill Bar 10 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Seimens / Aultra Lighting

SITC of On Stage Fixed Valance Bar 10 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Seimens / Aultra Lighting

SITC of Fixed Wing Structure designed as per site condition for a height approx 5.5Mtr x 1.5Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Seimens / Aultra Lighting

SITC of Motorized DMX operated Main Curtain 11 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated including all petty material required to complete the job upto entire satisfaction of EIC.

SITC of Motorized DMX operated Rear Curtain 11 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller.Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm DaiUndergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Aultra Lighting / Leksa Lighting / Markrich

SITC of Fixed Cyclorama arrangement of 8 Mtrs straight as per design made up of I Track for complete length with Trollies uniformly distributed along the track at every 200/250mm. All metal parts are powder coated with black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Perforated plastic cyclorama screen with perforation on 1side with gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / JC Joel / Showtex Size: 8 Mtr x 4Mtr

SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI and TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 45°, Total Power Consumption of 165W, High quality output replacing 1000W Halogen Par , Flicker Free 100% for Tv and Film Cameras, 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100%, Fuse and Internal safety protections, Strobe option Adjustable 1~25 times/Sec Variable, Fixture provided with Yoke of Manual Adjustment, 5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided), CRI and TLCI above 95, Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters, Efficient and well-designed Lamp reflector, Efficient Copper tube based Heat Sink for Heat Dissipation, Sleek and Unique Designed Light weight body, Fixture provided with Yoke of Manual Adjustment, DmX 512 dimming with 1 or 3 Channel modes, IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified), Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product. including all petty material required to complete the job upto entire satisfaction of EIC. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided), DmX 512 dimming with 4 /8 Channel modes, CRI and TLCI Value ) 90 , Strobe option Adjustable 1 ~ 25 times / Sec Variable, Beam Angle 30 Degree Total Power Consumption of 4250W, 11.7KHz Refresh Rate, In built preset’s for effects Fuse and Internal safety protections, Active Cooling with Low Noise Fan, 5 Pin XLR for DmX, High quality well designed inbuilt reflector, Flicker Free 100% for Tv and Film cameras, Black finish housing, IP20 protection, Having Strobe option and smooth dimming,illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of 200W LED Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided), 3200K colour temperature High quality uniquely designed Fresnel Lens, CRI,TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 110W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60HZ, Working Temperature - plus 40° ~ -30° Active Cooling with Low Noise Fan, DmX and RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment, Manual and DMX control Option mode through 5pin xlr Black powder coated fabricated housing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided), RGBW 3W Lamp source x 54 Pcs, DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source, Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming , In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 Pin XLR’s, 65dB ~ 130dB Sound sensing capacity Power In and Out Connections, High precision colors, IP20 protection Powder coated Black finish housing, Having Sound Control and Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified), Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012, CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014, LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 High precision steady color No heat, DmX 512 dimming with 2 Channel Beam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body, LED Easy view display, Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR’s, Total Power Consumption of 180W Sound Active Mode Control, IP20 protection. 65dB ~ 130dB Sound sensing capacity Power In and Out Connections, RDM Control options with latest technology (RDM ID to be specified), Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid and other rigging systems including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Fixed stage side Ladder as per the design, With an Mild Steel 40NB 48 OD black matt finish. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm. Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement, Powder coated with Matt black Texture Single onstruction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud and Trolley, Pivoted or Fixed Suspenders as per site conditions, Round pipe welded to create square frame Heavy duty trolly to hold and rotate wing frame Single Construction with Cross connecting Pipes at every 600mm, Ladder can be moved along the track Material for the light bar shall be of Mild Steel Pipe. Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions, Ladder Length shall be of customized type as per site condition including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Fixed on stage Lighting bar/winch of 11 Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the Added support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement, Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions, Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Fixed on stage Lighting bar/winch of 10 Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the Added support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner.Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Fixed on stage Lighting bar/winch of 9 Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the Added support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement, Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions, Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Fixed FOH Lighting bar/winch of 12 Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the Added support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner.Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures including all petty material required to complete the job upto entire satisfaction of EIC. .Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Power Distribution Electrical panel having a Incomer of 100A. Floor mount / rack mount / wall mount.Miniature circuit brakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures.Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130 All welding slag grounded off and welding pits wiped smooth with plumber metal.Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius.Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Nuetral separation made using incomer of LandT or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 28 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade, aluminum/copper conductor PVC insulated and sheathed, armoured cable and shall be suitable for connections.Provided with ivery connectors for the internal terminations and external outgoing connecting pointsCustom built as per specification and project requirement including all petty material required to complete the job upto entire satisfaction of EIC..Make : Seimens / Leksa Lighting / LandT

SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to plus 70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ), Total Max Rating 10A, 250V A.C, 20°C to plus 70°C Operating Temp, Moldings: Nylon, Flammability Rating UL94V-0, Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing.including all petty material required to complete the job upto entire satisfaction of EIC. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket, Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing.including all petty material required to complete the job upto entire satisfaction of EIC.Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixingincluding all petty material required to complete the job upto entire satisfaction of EIC.. Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket and 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing including all petty material required to complete the job upto entire satisfaction of EIC..Make : Leksa Lighting / Aultra Lighting / Markrich

SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares including all petty material required to complete the job upto entire satisfaction of EIC.

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Custom

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 150 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lidincluding all petty material required to complete the job upto entire satisfaction of EIC.. Make : Custom

SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Nuetrick / LL / Aultra Lighting

SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Nuetrick / LL / Aultra Lighting

SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.including all petty material required to complete the job upto entire satisfaction of EIC. Make : Polycab / Walna / SBEE

SITC of FRLS Copper unarmoured Flexible cable IS694 having 12 Core each of 1.5 Sq mm size including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Polycab / Walna / SBEE

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal including all petty material required to complete the job upto entire satisfaction of EIC. Make : LL /Falcon / Belden

Supply, Installation, Testing And Commissioning Of Interconnecting Refrigerant Pipe Work With ( 10/13Mm Thick) Closed Cell Elastomeric Nitrile Rubber Tubular Insulation Between Each Set Of Indoor and Outdoor Units As Per Specifications, All Piping Inside The Room Shall Be Properly Supported With Hangers. . Mandev, Totaline, Mexflow, Rajco 28.1

Supply, Installation, Testing And Commissioning Of Interconnecting Refrigerant Pipe Work With ( 10/13Mm Thick) Closed Cell Elastomeric Nitrile Rubber Tubular Insulation Between Each Set Of Indoor and Outdoor Units As Per Specifications, All Piping Inside The Room Shall Be Properly Supported With Hangers. . Mandev, Totaline, Mexflow, Rajco 15.9

Supply, Installation, Testing And Commissioning Of Interconnecting Refrigerant Pipe Work With ( 10/13Mm Thick) Closed Cell Elastomeric Nitrile Rubber Tubular Insulation Between Each Set Of Indoor and Outdoor Units As Per Specifications, All Piping Inside The Room Shall Be Properly Supported With Hangers. . Mandev, Totaline, Mexflow, Rajco 12.7

Supply, installation, testing, termination and commissioning of control cum transimission wiring (should be shielded cable in PVC Pipe) of 4C x 2.5 Sqmm Cu between indoor unit and out door unit and indoor units and its remote controller. Belton Cable, KEI , Polycab

Providing and fixing and in position the following PVC pipes for condensate drain duly insulated with kinny foam and vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the indoor units upto the main header in the shaft dor vertical risers) : 32 mm dia Supreme, Polypack, Polycab,

Air DistributionSite Fabricated DuctSupply,Fabrication , Installation and testing of sheet metal ducts in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 0.63mm (24 gauge) GSS complete as per HSR

Supplying, installing, testing and balancing of aluminium supply/return air grills of various sizes. Each grill shall be with fixed horizontal front bar at Zero/15 Deg deflection through the collar and register.Aluminium Return air 2- Slot Diffuser without damper.

Supplying, installing, testing and balancing of aluminium supply/return air grills of various sizes. Each grill shall be with fixed horizontal front bar at Zero/15 Deg deflection through the collar and register. Al Volume control dampers for Slot Diffusers and supply air collar of Linear Grille

SITC of Thermal insulation material for Duct insulation shall be closed cell cross linked polyethylene foam. Thermal conductivity of the insulation material shall not exceed 0.032 W/moK at an average temperature of 25oC. Density of the material shall be 25-30 Kg/m3. The product shall have temperature range of –40 oC to 105oC. The insulation material shall be fire rated for Class 1 as per BS 476 Part 6: 1989 for fire propagation test and as per BS 476 Part 7, 1987 for surface spread of flame test. Water vapour permeability as per DIN 52615 shall not exceed 0.15ng/Pa.Sec.m. 9 MM THICK

CABLING (POWER ) Power Cabling and Earthing:Supply, installation, testing and commisioning of LPCB approved mineral insulated copper conductor cables, construction as per BSEN 60702-1:2002 suitable for withstanding 950 deg under fire conditions as per BS 6387 CWZ and 850 deg under fire conditions on one single sample as per BSEN 50200. Cable should be manufactured with seamless copper tube and should be HFLS sheathed. (Tagging to be provided with aluminium strips on both the ends as approved).4Cx10 Sqmm

Providing and fixing following size of G.I. strip / G.I. wire on surface or in recess for loop earthing alongwith the existing surface/ recessed conduit/ submain wiring / on cable tray/ on surface including G.I. clamps etc. complete as required. 6 SWG G.I. wire

DmX Touch Screen based controller having 7” Multi touch screen option 2 DmX Outlets 5 Pin XLR’s, 512 Channels each, Optically isolated outputs, 4 Smooth Encoders for control operation of attributes, Backlit keys, 12 Fader Stacks, 600 plus Playbacks, 350 plus Group saving, 350 plus Presets, User defined shape effects, Macro saving options, External Midi timecode options, Internal clock, Shortcut user interfaces, Master fader, Blackout Key under Master fader, Numerical keypad for the light command entry inbuilt embedded within controller, USB interface, Scene saving options, Show saves and load save features, custom built user interface library for fixture files including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Avolite / Lite Puter / Leksa Lighting

Supplying, installation, testing and commissioning of MultiFormat twisted Pair Transmitter having auto switching between inputs, Inputs: 1 HDMI, 1x DP, 1 VGA plus A, Resolution: Up to 4K (4096x2160) @ 30 Hz or more, Signal transmission distance: Minimum 100m using shielded twisted pair cable for audio, video, controls and power. Output: Twisted Pair/ HD BaseT output on RJ 45 port, Should support audio embedding, HDCP 1.4 compliant and Support built-in EDID Management etc., complete as per specification as required, complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of MultiFormat twisted Pair Transmitter having auto switching between inputs, Inputs: 1x HDMI, 1x DP , Audio Input: 1 analog audio, Resolution: Up to 4K (4096x2160) @ 30 Hz or more, Signal transmission distance: Minimum 100m using shielded twisted pair cable for audio, video, controls and power. Output: Twisted Pair/ HD BaseT output on RJ 45 port, HDCP and EDID Management, as per technical specifications, complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Erection of Propeller type AC ventalating fans ( exhaust fan ) with necessary earthing of fan complete with louver shutter , 380mm sweep 900RPM ( Heavy Duty ) Make Orient , Usha , Khaitan , Crompton

M/s Parbhat Kumar Contractors (BID ID -1330199)

M/s Tech Sphere Infrastructures (BID ID -1331474)

Highlight Associates and Contractors (BID ID -1322473)

Rajesh Kumar Batra Contractor (BID ID -1329713)