EXTENSION AND REFURBISHMENT OF POWER METALLURGY LAB MATERIAL PROCESSING LABORATORY AT DIAT GIRINAGAR PUNE

Amount

B/R PORTION Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil as specified and directed.

M & L for Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), in all any kind of soil including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations all as specified and directed.

M & L for RCC M-25 design mix for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and directed.

M & L for RCC M-25 design mix for columns, pillars, piers, struts & posts all as specified and directed.

M & L for RCC M-25 design mix for Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M & L for RCC M-25 design mix for chajjas all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges etc complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed.

M & L for mild steel bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, in stirrups, spacers and binders, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed Note : Chemical to be used: Choloropyriphos 20 EC

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfacecomplete all as specified and directed Note : Chemical to be used: Choloropyriphos 20 EC

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed Note : Chemical to be used: Choloropyriphos 20 EC

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as specified and directed.

M & L for removing excavated materials to a distance exc 250m but n.exc 500m and deposited where directed in soil as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410- W (Gde- E-250) quality- B complete all as specified and directed.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer's instructions and as directed. Make : Armstrong, saint Gobain as approved.

M&L for rendering 15 mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10 mm thick on stone/brick masonary work/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick on brick /stone masonry/concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over 3mm thick coat of wall care putty in two layers on old or new plaster surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of acrylic emulsion paint (lustar paint) internally over a coat of acrylic primer over 2mm thick coat of waterproof putty in two layers on old or new plaster surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for 100 mm thick Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M & L for 75mm thick cement concrete 1:4:8 type D-2(using 40mm graded stone aggregate) as in sub base for floor complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L ultra charged vitrified coloured glazed ceramic tiles 10mm thick (square/rectangular) polished , area of each tiles exc. 0.36 sqm but not exc 0.42 sqm as in dado/skirting etc and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L ultra charged vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc. 0.36 sqm but not exc 0.42 sqm as in floors etc and jointed in neat in cement slurry and pointed in white or colour cement to match over with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for granite 16-18mm thick black/red colour (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for brickwork with flyash bricks, modular, straight or curved on plan to any radius exc 6m mean radius,built in CM 1:6 complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105x60mm complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling in steel frames etc. incl necessary form work complete all as specified and directed.

M&L for 40mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and directed.

M&L for factory made 35mm thick 2nd class H/wood Glazed and skeleton shutters, open rebated and prepared to receive 12mm thick toughened glass, gauge etc. (with sash bars) edges of ramming plain, chamfered or rounded, fitted with cut of and mitred beads for securing glass, gauge etc of size of members of shutters as specified in SSR Part-I section 8 clause No. 8.2(a) and fitted to chowkats complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia wire & average width of aperature 1.18mm complete all as specified and directed.

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium anodised powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc. complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with not exc.0.5 Sqm in each pane to aluminium frame work for ventilators complete all as specified and directed.

S&F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S & F for 100mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

M&L for aluminium, 4 levers mortice lock, vertical type size 100mm with handle complete all as specified and directed.

M&L for Brass, 4 levers Locks, cupboard, grade I, size 50 mm complete all as specified and directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed

S&F for 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 150mm brass handles, cast type, polished bright complete all as specified and directed.

S&F 200mm long decorative Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium handles, cast type anodised 125 mm long of extruded section cast aluminium alloy complete all as specified and directed.

M&L for 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard complete all as specified and directed.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified for fixing etc.including powder coating (minimum thickness of powder coating 50 micron) complete all as specified by Engg- in - chrge.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge complete all as specified by Engg- in - chrge. Note: Shutter Shall be including handles, hinges, holdfasts, bolts all fittings and fixtures

M&L for 18mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work complete all as specified and directed.

M&L for 8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc.0.5 Sqm with Solar control film 25 micron reflective type sticked to glass panes complete all as specified and directed.

S&F continous (piano) hinges 30mm width of flaps (when open) brass, bright finish complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces complete all as specified and directed.

S&F steel rolling shutters, with out ball bearing, 1.25mm thick laths as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type with all fittings and complete all as specified & directed.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10 cm width or girth etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/cieling, 20mm dia with all fittings and complete all as specified & directed.

All as per item No 60.00 here in before but 15mm complete all as specified & directed.

M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as specified and directed.

S&F 1000 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 25mm high pressure with polythene float and fly nut complete including dismantling of existing U/s water tank and removing to store complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all specified.

S&F in Table top Wash hand basin, vitreous China coloured flat back of size 540mm x 360mm x 115mm to 150mm mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type swan neck pillar taps, cast copper alloy chromium plated fancy type fixed complete all as specified and directed.

S&F bib taps long body cast copper alloy chromium plated ,fancy type with capstan head, screwed down, screwed for CPVC/iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.

S&F fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engr-In-Charge

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of size 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends with access doors 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified & directed.

S&F PVC (SWR) gully traps 125/100mm setting and jointed in cement solvent complete all as specified & directed.

E/M PORTION M & L for Point wiring with proper colour coding complete with and including PVC insulated, unsheathed, flexible bright annealed multi stranded copper conductor single core flame retardant low smoke (FRLS) cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through in and including heavy grade, rigid non-metallic PVC conduits 25 mm or higher dia as required at site, totally concealed in walls / floors /ceiling and surfaces on trusses by means of saddles & clips etc including all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and modular metal boxes, totally concealed in walls with modular plate including modular cover plate, fixed flush with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches, sockets fan regulators etc; including 1.5 Sqmm (22/0.30 mm) 1100 V grade PVC insulated FRLS, unsheathed flexible, multi stranded, copper conductor cable(green colour) as continuous earthwire connected to metallic bodies of luminaires/fans etc; at one end and to common earth dolly at other end, all as specified and directed for following :- Note :- Cost of cutting chases as per requirement & making good the disturbed surfaces to match with existing finishes shall deemed to be included in quoted rate.

(a)One light/Exhaust Fan point controlled by one, one way switch 6 Amps 240 Volts.

(b)one 3 pin 6 Amp Socket outlet point on Same board including earth wire as per description given above and connected to common earth and earth terminals.

(c)One 3 pin 6 Amp Socket outlet point on Independent board including earth wire as per description given above and connected to common earth and earth terminals.

All as per description of serial item No. 73.00 here -in -before but for 3-pin socket out let 15 Amps on independent board with 4 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous 4 Sqmm earth wire all as specified and directed.

S&F socket 2-in-1, 5 pin 6 Amps Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed by Engr-in-charge.

S&F Switch piano Modular type 6 Amps single pole one way all as specified and directed.

S&F socket 5 in 1, 6 /16 Amp Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed by Engr-in-charge.

S&F Switch piano Modular type 16 Amps single pole one way all as specified and directed.

S&F ceiling rose surface type PVC 50 mm dia 3 terminals including PVC mounting block complete all as specified and as directed.

S&F modular Fan step regulator, 120W - 2 module complete all as specified and as directed.

S & Fix 2 x 2 Ultra modern recess mounting 36 watts luminairel with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling as specified and directed. Make : Havells : PLANO2x2 or equivalent to Wipro/Philips/ Crompton as approved.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers including opening, making good the damage, connection, testing, commissioning etc. as specified and directed.

S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230 Volts with bus bars with front openable cover single pole and neutral 8 way with suitable size bus bar consumer unit including connection to existing earthing complete all as specified and as directed .

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve all as specified and directed.

S&F MCB DP 40 Amps 240V,10 KA breaking capacity , C curve all as specified and directed.

S&F MCB TP 63 Amps 415V,10 KA breaking capacity , C curve all as specified and directed.

S & Fix sheet metal enclosure MCCB DB VTPN double door 8 way,IP43, suitable for 415 V with suitable size bus bar including flushed on walls and making good disturbed surfaces all as specified and as directed. Make : Legrand Cat No.507727 Ekinox DPX3 or equivalent in specified makes as approved.

S & Fix sheet metal enclosure MCCB DB VTPN double door 4 way,IP43, suitable for 415 V with suitable size bus bar including flushed on walls and making good disturbed surfaces all as specified and as directed. Make: Legrand Cat No.507727 Ekinox DPX3 or equivalent in specified makes as approved.

S&F MCCB 4 Pole, 415 V,adjustable type, 125 A with breaking capacity 25 KA all as specified and as directed.

S&F MCCB 4 Pole, 415 V,adjustable type, 40 A with breaking capacity 25 KA all as specified and as directed.

Supply & Fix ceiling fan (after assembling the same) with the existing fan hook/box, 1200 mm (48") sweep, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor(BLDC) and connecting up complete with and including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area, of required length including fan rod less than 16mm dia from ceiling rose to procelain connector block of the fan, all as specified and directed.

“M & L for Earthing complete with galvanized Steel pipe electrode, 40 mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4 mm dia galvanized iron or steel wire all as shown in plate No. 2 to the earthing test point all as specified and indicated testing on completion including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed. Note :- Earth protection pipe & earthing lead wire upto and including 7.5 m length shall deemed to be included in unit rate quoted by the contractor.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified and directed.

S & F Sub main wiring of size 4x10 sq. mm + 1x10 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surface/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed.

S & F Submain wiring of size 4x6.0 sq. mm + 1x6.0 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surface/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed.

S & F Submain wiring of size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed.

S & F Submain wiring of size 2x4.0 sq. mm + 1x4.0 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed.

S & F Submain wiring of size 2x1.5 sq. mm + 1x1.5 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed. Note for item No. 94.00 to 98.00 above :- Cost of cutting chases as per requirement & making good the disturbed surfaces to match with existing finishes shall deemed to be included in quoted rate.

S& F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps capacity complete all as specified and directed.

Supply and fix New generation energy saving and environmental friendly long life 30W LED Street light made up of pressure diecast aluminium housing with highly efficient LEDs as Lighting source and PC cover with intigrated lens with IP 66 protection and impact resistance of IK07 as specified and directed.

Supply & Installation cost of 4 KG ABC Fire Extinguisher complete all as specified & directed by Eng-in-charge

Supply & Installation cost of 4.5 KG CO2 Fire Extinguisher complete all as specified & directed by Eng-in-charge

Supply, installation, testing & commissioning of water cooler fully stainless stell, electric driven (single phase) including RO having storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour (80/40 ltrs) including additional pressure booster pump suitable capacity for water cooler all as specified and directed.

Supply and install hi wall split AC units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma fiter for better indoor air quailty with 5star rating and invertor type capacity 2.0 TR including suitable size bracket for outdoor unit and testing etc complete all as specified and directed.

Supply and fix voltage stabilizer digital display single phase 5 KVA 150-250V Copper Motor Winding 5 KVA capacity standards for 1.5 Ton Air Conditioner etc complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes all as specified and as directed. :- (a) 35 sqmm X 3.5 core

(b) 120 Sqmm x 3.5 Core

(c) 240 Sqmm x 3.5 Core

Supply Fabricate, install, connect, test and commission Outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA poweder coated and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, arrangements for bus bar trunking system, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:- Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (as if required) (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet. Make: Any CPRI approved

(a) LED/Neon indicator bulb in RYB Colour - 1 Set.

(b) 4 No aluminium Bus bar 200 amps with chamber

(c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

(d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 200A with breaking capacity 25 KA - 01 Nos

Out going: (e) MCCB 4 Pole, 415 V,adjustable type, 125 A with breaking capacity 16 KA - 02 Nos

(f) MCB 4 Pole, 415 V,adjustable type,40A - 01 Nos

(g) suitable cable gland for incoming and outgoing cable

Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement & all as directed.

Supply & Laying 80 mm outside dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement & all as directed.

Material and Labour for Earthing complete with with 600 mm x 60 mm x 6.15 mm thick, galvanized steel earth plate electrode buried vertically in ground (not less than 2.25 meters deep below normal ground level),with top edge of earth plate not less than 1.5 meter below ground level connected to and including G.I strip of size 25mm x 4 mm by means of bolts/nuts/check nuts and washers of galvanized steel, GI Strip encased in and including 40 mm bore GI light grade protection pipe starting from top edge of the earth plate laid in ground/floors fixed on wall. GI strip to be connected with LT Panel with provision of charcoal dust & common salt all around the earth plate 15 cm layers including necessary excavation and earth work in any type of soil/strata, provision of concrete earth pit using PCC 1:3:6 type C-2 including RCC cover using PCC 1:2:4 type B1 20 mm dia GI light grade with wire mesh and tunel for watering arrangement, complete all as shown on electrical plate No. 3 of SSR Part I includig testing after completion of earthing complete all as specified and directed. Note:- Cost of earthing lead and protection pipe upto 7.5M shall deemed to be included in the quoted rate.

Excavation in trenches in any type of soil n. exc.1.5 m wide and not exceeding 1.5m in depth for laying of pipes, cables or for fixing poles and stays/tower or for laying pipes (where provided for protection of cable) and getting out including trimming the sides and forming botton surface to required level complete all as specified and as directed by Engineer-in-Charge.

M& L for Returning ,filling of Soft/loose soil/ Hard/dense soil in including spreading , levelling , watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing surplus excavated material n exc 50 mtr and deposting where directed a level n exc 1.5m above the starting point all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure all as directed.

Supply and dixing GI tubing (ISI Marked), light grade 50mm bore for cable protection with & including all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and directed.

Supply and dixing GI tubing (ISI Marked), light grade 80mm bore for cable protection with & including all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and as directed by Engineer-in-Charge.

Supply & laying GI Tubes, "Medium grade", galvanised iron, with & including all necessary fitting; laid in trenches for following bore size of pipe as specified and as directed by Engineer-in-Charge:- (a) 40 mm bore

(b) 25 mm bore

Supply and fixing of Gun metal gate valves of following sizes with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge. (a) 40mm bore.

(b) 25 mm bore

Supply and fixing of Straight plain brass ferrules (or connecting screws) size 40mm screwed both ends as specified and directed.

Bharekar Construction

M/S P D TUPE

Samyak Engineers

S G Enterprises

SUN Enterprises

J.G.Goel

sagar construction