Proposed Beautification and Development of Various Garden in MBMC Area. (Basic Facility Development Fund)

Amount

Description

ITEM NO 01 Providing detailed geological reports of proposed site by maintaining geotechnical investigation of structure stratification collecting soil, rock and ground water samples for laboratory tests to arrive the foundation design parameters . Rock properties such as type of rock, jointing fractures, etc. complete with suggestion about the site foundation and remedies. SSR 1.57/20

ITEM NO.02 Removing cement tiles,or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete SSR 46.19/297

ITEM NO.03 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. SSR 46.09/296

ITEM NO.04 Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR 46.11/296

ITEM NO.05 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. SSR 46.29/297

ITEM NO 06 Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) SSR 12.24/86

ITEM NO 07 Excavation for foundation in earth ,soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means SSR 21.01 / 153

ITEM NO 08 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR 21.02 / 153

ITEM NO 09 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means SSR 21.04 / 153

ITEM NO.10 Excavation for foundation / pipe trenches in slush muddy /marshy / slushy / soil including use of poclain, labour for dewatering during execution including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, preparing the bed by cleaning the mud, labour required for execution for shuttering item but excluding backfilling, etc. complete. Providing and fixing shuttering shall be paid separately. MJP DSR/53/8

ITEM NO 11 Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means SSR 21.10/154

ITEM NO 12 TRANSPORTING OF EXCAVATED MATERIALS lead 20.00 k.m. SSR in Statement C 1 (Page 560)

ITEM NO 13 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR 21.36/157

ITEM NO 14 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 21.37 / 157

ITEM NO 15 Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97 % of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with vibratory roller. SSR 2.23/24

ITEM NO 16 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 21.38 / 157

ITEM NO 17 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/ quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade ) (PCC) SSR 24.10 / 176

ITEM NO 18 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C columns and steel stanchion etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 25.15/178

ITEM NO 19 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal fo R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR 25.35/180

ITEM NO.20 Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 26.19/185 RA

ITEM NO.21 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade ) SSR 25.54 /181

ITEM NO 22 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR 25.74 / 183

ITEM NO 23 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 26.33 / 188

ITEM NO 24 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR 23.01/173

ITEM NO 25 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. SSR 23.04 /173

ITEM NO.26 Providing sacrificial shuttering for deck slab made up with galvanised Cold Rolled Cold Annealed (CRCA) steel of 310 MPA Grade with all Contractor's material, labour, erection fixing, welding etc. (Decking Sheet ) SSR 17.70/141

ITEM NO 27 Centering and shuttering of steel plates with M.S. Angles including strutting, propping etc. and removal of form for Cornices and mouldings. MCGM R3-CS-CW-30-j

ITEM NO 28 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR 27.05 / 197

ITEM NO 29 Providing uncoursed rubble masonry of trap / granit / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. SSR 28.04/199

ITEM NO 30 Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done and striking joints when no plastering is to be done on the inside, watering scaffolding etc.complete SSR 28.10/146

ITEM NO 31 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete SSR 32.11 / 209

ITEM NO 32 Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. SSR 32.32/211

ITEM NO 33 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist SSR 50.79/ 346

ITEM NO 34 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 32.04 / 209

ITEM NO 35 Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. SSR 32.27/210

ITEM NO 36 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. SSR 35.21 / 225

ITEM NO 37 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. SSR 35.23 / 225

ITEM NO.38 Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications etc. complete. (by stone/boulder) SSR 14.72/501

ITEM NO.39 Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. SSR 17.37/132

ITEM NO 40 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting SSR 33.41 / 266

ITEM NO.41 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. SSR 33.42/217

ITEM NO.42 Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 20 mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. SSR 50.13/332

ITEM NO 43 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiski flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. SSR 33.67/220

ITEM NO 44 Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR 33.27/264

ITEM NO 45 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 33.06 / 213

ITEM NO 46 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 33.18 / 263

ITEM NO 47 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 33.34 / 216

ITEM NO. 48 Providing and laying rough natural stone tiles 25 mm to 30 mm thick of an approved quality and size for paving / flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, pointing in cement mortar 1:3, cutting, dressing, leveling, jointing, pointing, curing, finishing etc complete as directed by Engineer In Charge. MCGM/ R3-CS-FL-04 25 to 30 mm thk. rough Kota stone /Sand stone) MCGM/ R3-CS-FL-04-c

ITEM NO 49 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. SSR 33.68/220

ITEM NO 50 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. SSR 39.37 / 251

ITEM NO 51 Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. a) Without powder coating Note While arriving at the rate of item of item weight at 6.90 Kilogram/Square Metre is considered. SSR 39.54/257

ITEM NO 52 Providing and fixing in position b) Powder Coated aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. SSR 39.53B/257

ITEM NO 53 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 39.68 / 323

ITEM NO 54 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR 39.01 / 303

ITEM NO 55 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary SSR 34.09/273

ITEM NO 56 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR 39.09 / 246

ITEM NO 57 Providing and fixing stone cladding(Rubble,malad,etc). on external face of the wall, with all the necessary materials along with finish in pigment, including all labour ,etc complete approved MR

ITEM NO 58 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 31.04 / 205

ITEM NO.59 Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR.31.26/208

ITEM NO 60 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) SSR 31.12/253

ITEM NO 61 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with wate proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3 butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) SSR 31.13/254

ITEM NO 62 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. SSR 21.25/192

ITEM NO 63 Supply and installation of cubicles of width and depth as perAthena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C, All doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U-Channel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete. SSR 51.162/504

ITEM NO.64 Supply of hand finish top machine cut, 3 line dressing Cobble Stone in size: 100 x 100 x 100mm in grey colour to be fixed on prepared sub-base with cement mortar 1:4 40 mm thick and cement slurry, filling of joints in C.M. 1:2 with grey cement to match the colour of cobble stone in the required pattern, design and as directed by the Engineer incharge, including cleaning, curing etc. complete as specified and as directed by the Engineer. NOTE: THIS ITEM SHOULD BE OPRATED ONLY AFTER SPECIFIC SANCTION OF DIR(E.S.& P.) or Equivalent. MCGM R3-RW-3-38

ITEM NO.65 Providing & fixing in the footpath Combi- Paver having average crushing strength not less than 80 N/mm² as per technical specifications and IS Code 15658:2006; shot blasted 60mm thick in approved texture and colour and combination size 100 x 200, 125 x 200, 175 x 200, 225 x 200, 275 x 200 to be fixed on average compacted thickness 25 mm well graded sand cushioning uniformly compacted with proper capacity mechanical compactor with required level, grade and camber etc. complete as specified and as directed by the Engineer. NOTE: THIS ITEM SHOULD BE OPRATED ONLY AFTER SPECIFIC SANCTION OF DIR(E.S.& P.) or Equivalent. Approved MR

ITEM NO.66 GRASS JOINT PAVING: Providing and laying machine cut machine polished kota stone flooring for Grass joint paving, 25mm to 30mm thick required width in plain pattern on bed of 1:6 C. M. including cement float, curing, polishing and cleaning including removing unwanted stuff as directed. Excavation for Planting of Lawn Digging of Soft surface up to 30 Cm. as per drawing and specification provided by Engineer In-charge. Approved MR

ITEM NO 67 Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm.

Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solidsclear sealer @ 150 to 250 gms per sqm using surface roller and protecting from fallingdust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1:8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top withdepth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary ) SSR 54.01 / 513

ITEM NO 68 Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering Incharge. Using Concrete Batching and Mixing Plant SSR 7.05/69

ITEM NO.69 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). SSR 38.04/233

ITEM NO 70 Providing and applying one coat of aluminium paint of approved make to new structural steel work in building and workshop including scaffolding if necessary, cleaning and preparing surface (excluding primer coat) etc. complete. SSR 35.05/223

ITEM NO 71 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR 40.01 / 264

ITEM NO.72 ACP Cladding: - Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/Square Metre) SSR 51.100/378

ITEM NO 73 Aluminium Fins:- Providing and Fixing Horizontal fins with 3”x1” Aluminium Tubular Section Powder coated Horizontally with 1” facing and 3” Gap in to in in sections with 1”1” Aluminium Angle powder coated fixed at top and bottom for fixing, with Hardware , with labour inclusive. Approved MR

ITEM NO. 74 Providing and fixing in position UV resistant, fire retardant, virtually unbreakable and temperature resistant (-40° C to +130° C) Polycarbonate corrugated sheet of 2mm thickness for roof of approved make to match the roof profile at any height with G.I. J hooks bolts of G.I. clamps nuts & bolts or with self drilling fastener and EPDM washer etc. complete as directed. MCGM R3-CS-RW-08

ITEM NO.75 Providing and fixing 80mm thk. Glass bricks of approved make, size and type in glass block adhesive including filling joints with glass block grout, cleaning etc. complete as directed by Engineer in charge. MCGM R3-CS-FL-19

ITEM NO.76 Providing and fixing of factory made uPVC casement window / Fixed Window & Casement Door (White Colour) comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa.

All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. SSR 54.09/517

Casement Window (Big Series) frame of size 67 x 62 mm & Sash / Mullion of size 67 x 78 mm.

Casement Door (Big Series) frame of size 67 x 62 mm & Door Sash of size 67 x 115 mm & Mullion (if required) of size 67 x 78 mm.

Fixed Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size 67 x 78 mm.

ITEM NO.77 Providing and fixing 12mm thk toughened etched glass as per the design, as per the design. Glass to be fixed at top & bottom in heavy guage aluminium 'c ' channel concealed in floor & boxing. Cost to be inclusive of silicon sealant to the periphery of the glass as directed MCGM R3-CS-AW-19

ITEM NO.78 SS DUSTBIN Garden 59

ITEM NO.79 SS 202 Grade dustbin double Garden 60

ITM NO. 80 Standard Bench (Refer sketch 14) Product area:1.8 x 0.6 mts, Capacity in nos: 4 nos, Product height:0.80m MCGM GW-3-2-j

ITEM NO.81 Royal Bench (Refer sketch 15) Product area:1.2 x 0.6 mts, Capacity in nos: 3 nos, Product height:0.90m MCGM GW-3-2-k

ITEM NO.82 Victoria Bench (Refer sketch 17) Product area:1.2 x 0.6 mts, Capacity in nos: 3 nos, Product height:0.90m MCGM GW-3-2-m

ITEM NO.83 Vip Bench (Refer sketch 18) Product area:1.2 x 0.6 mts, Capacity in nos: 3 nos, Product height:0.90m MCGM GW-3-2-n

ITEM NO. 84 Circular tree guard : Providing, fabrication and fixing M.S. Circular tree guard with circular pipe of 10 gauge, 50mm Dia Circular vertical post, 40mm Dia Horizontal support 18mm Dia. intermediate support with M.S. cap- (type-I) logo panel etc. including cutting welding, riveting, oil painting with navy blue colour or any other approved colour shade as directed and fixing in cement concrete foundation including cement concrete paver block lining including removal of surplus material/debris and restoring damaged portion of footpath etc. as directed.(Design details vide Drg.No.4F-A1.1, 4FA1.2, A1.3 in the catalogue of street Furniture (Vol.I) published by B.M.C.) MCGM R3-RT-16-28

ITEM NO.85 Hexagonal tree guard No. tgu- B: Providing, fabrication and fixing M.S. Hexagonal tree guard with circular pipe of 10 gauge, 50mm Dia Circular vertical post, 40mm Dia circular horizontal support, 18mm Dia circular intermediate support with M.S. cap-(type- I) logo panel etc including cutting welding, riveting, oil painting with navy blue colour any other approved colour shade as directed and fixing in cement concrete foundation including cement concrete paver block lining including removal of surplus material/debris and restoring damaged portion of footpath etc. as directed. (Design details vide Drg.No.4F-B1 in the catalogue of street Furniture (Vol.I) published by B.M.C) work complete as per specifications and as directed by the Engineer. MCGM R3-RT-16-29

ITEM NO.86 Square tree guard : Providing, fabrication and fixing M.S. Square tree guard with circular pipe of 10 gauge, 50mm Dia Circular vertical post, 40mm Dia circular horizontal support, 18mm Dia circular intermediate support with M.S. cap-(type-I) logo panel etc including cutting welding, riveting, oil painting with navy blue colour any other approved colour shade as directed and fixing in cement concrete foundation including cement concrete paver block lining including removal of surplus material/debris and restoring damaged portion of footpath etc. as directed. (Design details vide Drg.No.4F-C1 in the catalogue of street Furniture (Vol.I) published by B.M.C) work complete as per specifications and as directed by the Engineer. MCGM R3-RT-16-30

ITEM NO 87 Fountain (SP-ME-TS-75) MCGM GW-4-5

Foam Bubble/ Geyser jet fitted on universal ball joint MCGM GW-4-5-a

SS 304 Framed mesh cover MCGM GW-4-5-b

Monobloc Submersible Pump MCGM GW-4-5-c

IP 68 TYPE Plrogramable submersible Lights MCGM GW-4-5-d

Fabricated MS powder coated control panel MCGM GW-4-5-e

Necessary G.I / PVC plumbing pipes, fittings , valves MCGM GW-4-5-f

Necessary electrical cabling MCGM GW-4-5-g

Spot Light MCGM GW-4-5-h

ITEM NO.88 Providing, hoisting and fixing at all level precast or reinforced cement concrete gazebo with all elements like roofing, string courses, bands, copings, columns, pillars beams, plinth beams, railings, benches, flooring, foundations including architectural design, moulding, arches, shapes, and applying proper texture and paining coats to suit a particular asthetic element (trunk of trees, shapes of animals, birds, timber benching, any element or structure representing culture or tradition) the cost of required centering, shuttering and reinforcement, of M25 grade and fibrous material, etc complete as per the instructions of Architect or Engineer-incharge.( Refer sketch 3) MCGM GW-3-3-a

ITEM NO.89 Supply and installation of Vertical garden as per design with approved plants ,including the fabricated tray/stand/patterned fabrication with 2 coat of oil paint and necessary fittings to fix on Walls/pillars etc specification as per drawings and Engineer in charge Complete. Approved MR

ITEM NO 90 SITC of Drip Irrigation system Including all related Materials , Drip Fittings + valve , Piping & Solutions material complete as per specification provided by the engineer Incharge Approved MR

ITEM NO 91 Providing & Installation of Filter system including Fittings charges for vertical garden,instatllation complete as per specification provided by the engineer Incharge Approved MR

ITEM NO.92 Providing playing equipments for pets for play area including bolting ,fixing on PCC base /Foundation etc as per Approved materials and drawings specification provided by engineer incharge Complete Approved MR

Wooden planks

Hurdle

Tunnel/Dog crawl

Stepping pads

Trampoline

Hoop jump

Platform climb

ITEM NO.93 Providing and fixing EPDM (Rubber Mat)(Ethylene propylene diene methylene) flooring for children play area of thickness 25-30 mm above PCC as per specification provided by engineer incharge Approved MR

ITEM NO. 94 Providing and fixing Equipments for children play area, Gym area Etc as per drawings and specification by the engineer in charge Garden SSR

FRP Wave slide ht 1.5 mtr

Roller slide ht 1.5 mtr

FRP Spiral slide ht 1.5 mtr

FRP Mini tube slide ht 1.5mtr

Rocking boat

Double swing Eco

Circular swing

Deluxe luxury swing

Multi seater see saw

Crystal maze

Criss cross scrambler

Walking barrel

Turbo tower

Net Rock scrambler 1.5 mtr

Parallel bar

Loop rung

Combination set 4 in 1

Gym equipment

Forearm twirl

SIT up board

Air walker

8 in 1 combination (chest press+standing twister+surf board+horse rider+leg press+cross trainer+push up bar+aerial stroller)

ITEM NO.95 Artificial Turf FA-GC-019-15 Providing and fixing articial turf of approved thickness (grass) Lush green as per size and specification provided by engineer incharge

ITEM NO.96 Providing and laying of beach sand for children play area as per specification provided by engineer incharge Approved MR

ITEM NO.97 Providing and laying Natural unpolished White Pebbles of size 30mm to 50mm laying in 3 layers (finish layer of 150mm nominal thickness), graded pebbles etc complete as per drawing as specified as directed by Engineer. (Refer sketch 22) MCGM GW-3-1-c

ITEM NO.98 Providing and laying Natural unpolished Black/Brown Pebbles of size 30mm to 50mm laying in 3 layers (finish layer of 150mm nominal thickness), graded pebbles etc complete as per drawing as specified as directed by Engineer. (Refer sketch 23) MCGM GW-3-1-d

ITEM NO.99 Providing and laying Natural unpolished mixed colour Pebbles of size 5mm to 20mm laying in 3 layers (finish layer of 75mm nominal thickness), graded pebbles etc complete as per drawing as specified as directed by Engineer. (Refer sketch 24) MCGM GW-3-1-e

ITEM NO.100 Providing and Fixing Wall mounted bicycle stand units as per drawings and specification provided by the engineer in charge. Approved MR

ITEM NO.101 Providing and fixing Decorative themed FRP Based Gate (Sports,Musical,Historical Hero,Cultural) entrance of size as specification provided by engineer incharge.complete(5 mt width) Approved MR

ITEM NO.102 Supplying and fixing Stone sculpture/statues of theme upto 1.8 mt ht of approved size and material complete as per specification provided by engineer incharge Approved MR

ITEM NO.103 Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. SSR 46.39/298

ITEM NO.104 Providing & Casting of one figure of Statues/Murals of real size Humans. MCGM FA-GC-16-01

ITEM NO.105 Providing and fixing thematic murals created in mix media in different shape and size as per required artwork made out of 8mm, 12mm and 19mm thick marine plywood and BTC wood and fibre coating in imported silicon rubber painted MCGM CE4-09-002- FA141C

ITEM NO.106 Artist painting of wall in 3 D format and text format MCGM FAIR-3D-AWP-A

ITEM NO.107 P/f clear acrylic panel of size 350 mm x 250 mm with vinyl cut type and graphics etc MCGM CE4-12-13-A-F-335

ITEM NO.108 P/F MURAL MADE IN FIBRE RAINFORCED PLASTIC AS PER GIVEN ART WORK OF REQUIRED SIZES MCGM CE4-07-076-FF-47A

ITEM NO.109 MURAL IN PAINT (3D) MCGM CE5-10-024- FAIR1

ITEM NO.110 SUPPLY AND INSTALLATION OF FFRP SPHERE SCULPTURE MCGM SG8-13- 004.002-FA2

ITEM NO.111 Providing and Fixing Decorative / Ornamental grills as per design for compound wall Fencing including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc. complete as directed. MCGM R3-CS-SL-13

ITEM NO 112 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge. SSR 23.09/213

ITEM NO 113 Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete SSR 40.06/329

ITEM NO.114 Double Side Pvc Coated waterproof And Sunshed Tensile Fabric Tensile Roofing including strings and fabrication Specification as per engineer in charge and drawing. Complete with fitings Approved MR

ITEM NO.115 Providing and fixing Mangalore tiled roofing with class 'AA' tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of 50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc. complete (Excluding ridge and hip tiles). SSR 38.02/233

ITEM NO.116 Providing and Fixing laser cut 3-4 mm Acrylic letters of height upto 24 inches with, with all other necessary Hardware for fittings and Labour all Inclusive.including profile LED back lighting .complete Approved MR

ITEM NO.117 Providing and fixing MBMC Logo on entrance gate Approved MR

ITEM NO.118 Providing and fixing stainless steel Name Board on gate/Building including LED backlight complete as per drawing .size (6mx1m) Approved MR

ITEM NO.119 Providing and Installation Planter figure set of 3 having size 4 ft, made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO.120 Providing and installation Hand Model holding tress having size of 3ft ht 9ft wide made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO.121 Providing and installation Sculpture/statute, ht of structure - 6ft made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO.122 Providing and installation Sculpture/statue of freedom fighters, ht of structure - 8ft made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO.123 Providing and installation decorative Sculpture, ht of structure - 6ft wide 4 ft ht made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO.124 Providing and Installation decorative Sculpture as per approved design, ht of structure - 8 ft made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO.125 Providing and supplying themed seating area as per approved design, structure 7- 8 ft wide and 9-10 ft height made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO.126 Providing and Installation thematic planter as per approved design, ht of structure 4 ft made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO 127 Providing and Installation Signages as per approved design, ht of structure 5-6 ft made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO 128 Providing and Installation steps and seat out for play area as per approved design, ht of structure steps 4 ft length 5meter,sit out box 8ft X 8ft made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge.(Including fabrication) Approved MR

ITEM NO 129 Providing and Installation themed shelter area with polycarbonated sheet as per approved design, ht of structure 12-15 ft, width- 5 to 6ft made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design complet as per specification provided by engineer incharge. (Including fabrication) Approved MR

ITEM NO.130 Providing and Fixing Rocket themed slides 3 mt Ht for play area as per approved design &size, made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design Complete as per specification provided by engineer incharge. Approved MR

ITEM NO.131 Providing and Installation planet themed merry-go-round for play area with bearing and MS fabrication as per approved design &size, made of R.S.C.R (Fibre ) material with double PU gloss or matt finished coating with approved design Complete as per specification provided by engineer incharge. Approved MR

ITEM NO.132 Providing and laying Coloured marking on street as per Theme with thermoplastic paint as per approved designs Complete as per specification provided by engineer incharge Approved MR

ITEM NO 133 Chasing Jets

SITC of Vertical jet nozzle with 25mm inlet and 12mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height. Ripples make 8 NOS

3m long SS Header with 4 SS nipples each.Ripples make 2NOS

SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. Shakti / CG / Kirloskar 2 NOS

Lights (RGB LED 18x3w with DMX control) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. Ripples make 8NOS

Fast acting Solenid Valve in Brass / SS 25mm Uflow / Darhor 8 NOS

2.5 sq mm 3 core double PVC sheathed copper cable Ploycab / KEI / Finolex make -120 Meters

2.5 sq mm 2 core double PVC sheathed copper cable-60Meter

1 sq mm 2 core double PVC sheathed shielded copper cable-60 Meter

SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. Ripple make 1 NOS

1 sq mm 2 core double PVC sheathed shielded copper cable-480 Meter

SITC of SS304 Tripod with SS fastners custom designed to install the above Jet Ripple make 4 NOS

ITEM NO 134 Arching Jets

SITC of Vertical jet nozzle with 50mm inlet and 15mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height. Ripples make 2 NOS

SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. Shakti / CG / Kirloskar 2 NOS

Lights (RGB LED 18x3w with DMX control) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. Ripples make 6 NOS

2.5 sq mm 3 core double PVC sheathed copper cable-120m

2.5 sq mm 2 core double PVC sheathed copper cable-120m

1 sq mm 2 core double PVC sheathed shielded copper cable-120m

SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. Ripples make 2 NOS

SITC of SS304 Tripod with SS fastners custom designed to install the above Jet Ripples 2 NOS

ITEM NO 135 Sunburst Jet

SITC of Vertical jet nozzle with 25mm inlet and 10mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height. Ripples NOS 1

2m long SS Header with 7 SS nipples each Ripples make 1 NOS

25mm ball valves in SS / Brass HM / Zoloto 7 nos

SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. Shakti / CG / Kirloskar 1 NOS

SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. Ripples 7 NOS

2.5 sq mm 3 core double PVC sheathed copper cable Ploycab / KEI / Finolex 60 M

2.5 sq mm 2 core double PVC sheathed copper cable-60 m

1 sq mm 2 core double PVC sheathed shielded copper cable-60m

SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. Ripples - 1 NOS

SITC of SS304 Tripod with SS fastners custom designed to install the above Jet Ripple make 2 NOS

ITEM NO. 136 Revolving Spiral Jets

SITC of revolving spiral jet in SS / Brass construction capable of being adjusted for speed of rotation and with an integrated flow straightner for smooth flow of the water jet for the required jet height. Ripples make 8 NOS

SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H.Shakti / CG / Kirloskar make 8 NOS

SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. Ripples make 24 NOS

2.5 sq mm 3 core double PVC sheathed copper cable Ploycab / KEI / Finolex -480 Meter

2.5 sq mm 2 core double PVC sheathed copper cable-180 meter

1 sq mm 2 core double PVC sheathed shielded copper cable-180 Meter

Junction Box for DMX 512 Lights SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. Ripples make 3 NO

SITC of SS304 Tripod with SS fastners custom designed to install the above Jet Ripple 8 NOS

ITEM NO.137 LASER

5w RGB Laser with integrated software LPS / Pangolin / Able -1 NOS

Software for Laser operation Pangolin / Moncha software-1 NOS

DMX Converter-1 NOS

1.5mm 3 core Flat double PVC sheathed copper cable Ploycab / KEI / Finolex-60 Meter

Cat 6 cable with necessary connectors etc.-60 Meter

SITC of GI frame custom designed for mounting the Laser enclosure. Ripple 1 NOS

SITC of Weather Proof Laser enclosure to mount the Lasers outdoors in powder coated aluminium body with automatic temperature and humidity control at preset levels suitable for a 5W Laser. Air intake and exits to be suitably sized and protected with filters to protect the laser from dust and insects, complete with IP55 control panel for 24hr monitoring of temperature and humidity with interconnecting cables for a minimum distance of 100m. Ripple 1 NOS

ITEM NO 138 Control Panels

Starter Panel for Pumps (1 panel for upto 24 pumps) SITC of custom made indoor type Motor Control Panels with MCB's, Contactors, Overload Relays, Single Phase Preventers, for automatic operation of pumps-13 Pumps

SITC of custom made indoor type Light Control Panel with power supplies, DMX 512 transmitter cards, MCB's ctc for automatic operation of lights-45 Lights

SITC of custom made indoor type Control Panel with DXM cards, Electronic relays, Power Supplies & MCB's for automatic switching of solenoid valves and pumps 21 Pumps /SV's

Custom made indoor type Panel with MCCB's and main bus bar for supply to the above no of panels.1- Panel

ITEM NO 139 Panel Interconnecting Cables & PVC Double Wall Conduit

SITC of 16mm four core cable for connecting the Panels-35 m

SITC of 35mm four core cable for connecting the Panels-35m

SITC of DMX interconnecting cable-50m

SITC of PVC Double Walled Conduit for interconnecting the cable trenches.-100 m

ITEM NO. 140 Sound System

SITC of professional audio system suitable for the outdoor venue with complete accessories mounting poles etc. Harman (JBL) / VAL Audio / QSC/ Sound System, Speaker x 6nos., Crown Amplifier, Speaker Stand & Brackets, 2 Monitor Speakers, Cables, Rack etc.JBL / QSC / VAL Audio -1 SET

ITEM NO 141 Fountain Control System and Programming

SITC of 2 universe DMX show controller with 8 digital inputs and outputs, 2x16 segment LCD display and show scheduling option.-Syncronorm make 1NOS

SITC of desktop computer for operating the show. HP / Dell / Equivalent Computer Core i5, with 4GB graphic card SSD 240 GB, 15 inch monitor

Programming of the fountain nozzles, lights, lasers, etc to the music 3 NOS

ITEM NO. 142 UPS

SITC of UPS for sensitive equipment UPS 3KVA Online Microtek / Luminous / Equivalent1 NOS

ITEM NO 143 Consumables, Packing, Shipping etc

Electrical tape, cable joint waterproofing rubber & packaging of equipment for road transport.-1 LOT

ITEM NO.144 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) SSR 43.19

ITEM NO.145 Providing and fixing Orissa type white glazed earthenware water closet pan of size 260mm x 440mm x 580mm with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete. SSR 48.42/316

ITEM NO.146 Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental including necessary sockets/union nut etc. complete. SSR 42.80

ITEM NO.147 Providing and fixing 15 mm diameter PVC Aqua kraft type super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete SSR 43.39

ITEM NO.148 Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. SSR 41.69

ITEM NO.149 Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge. SSR 48.35

ITEM NO.150 Providing and fixing C.P. Angular stop cock with wall flange continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. SSR 42.79

ITEM NO. 151 Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification No. AP-WCR/WC CSR 3-3-10

ITEM NO.152 Providing and making ISI Mark ferrule connection of 32 mm dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. SSR 42.75

ITEM NO.153 Providing and fixing earthenware lipped flat back/corner type Urinal of Hindustan /Perryware / Neycer / Cera or equivalant make with PVC 5 liters flushing system of 5 liters with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap & soil pipe connection up to the outside face ofwall. SSR 41.61

ITEM NO. 154 Providing and fixing 10 cm rigid PVC Nahani trap with grating etc. complete as per engineer in charge. SSR 42.67

ITEM NO 155 Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

a) 15mm dia SSR 42.55

b) 20mm dia SSR 42.56

c) 25mm dia SSR 42.57

d) 32 mm dia SSR 42.58

e) 40 mm dia SSR 42.59

f) 50 mm dia SSR 42.60

ITEM NO 156 Supplying and erecting ISI mark GI pipe 32 mm dia.‘C’ class at position with accessories complete as per specification no. CW-PLB/GP. CSR 16-5-10

ITEM NO 157 Supplying and erecting ISI mark GI pipe 40 mm dia.‘C’ class at position with accessories complete as per specification no. CW-PLB/GP. CSR 16-5-11

ITEM NO 158 Supplying and erecting ISI mark GI pipe 50 mm dia.‘C’ class at position with accessories complete as per specification no. CW-PLB/GP. CSR 16-5-12

ITEM NO 159 Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-31

ITEM NO 160 Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-32

ITEM NO 161 Supplying and erecting 32/40 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-33

ITEM NO 162 Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-34

ITEM NO 163 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV CSR 13-8-13

ITEM NO 164 Providing and fixing 50mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber] SSR 41.30

ITEM NO 165 Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.93

ITEM NO 166 Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. SSR 42.94

ITEM NO 167 Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.27

ITEM NO 168 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.28

ITEM NO 169 Providing and making lead joints for 150mm diameter cast iron pipe line including lead and testing. SSR 41.06

ITEM NO 170 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. ( KHURRA) SSR 42.67

ITEM NO 171 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap SSR 42.02

ITEM NO 172 Providing and fixing Ductile iron manhole cover of light/medium/heavy duty with frameof any size over inspection chamber etc. complete (Prior permission of S.E. is to be obtained before inclusion of this item in the estimate) SSR 50.30

ITEM NO 173 Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer. SSR 50.85

300 mm wide ( drain channel)

450 mm wide ( drain channel)

ITEM NO 174 Supplying, erecting, testing and commissioning of minimum three & above star rated 3 phase, 415 V, 50 Hz, submersible pump set of 7.5 kW/10HP suitable for erection on open well, pump having delivery head from 60 to 28 m and discharge from 120 to 840 litres per minute & 65 mm suction/50 mm delivery dia. as per specification no. WP-OSP. CSR 12-3-7

ITEM NO 175 Providing and fixing gun metal Y Strainer confirming to IS and tested to a pressure not less than , including rubber gasket, flanges, unions, nuts, bolts and washer etc complete as required. 50 mm dia SSR Pag NO. 534 ITEM NO 124

ITEM NO.176 Providing and fixing gun metal Non Return Valve confirming to IS 778 and tested to a pressure not less than 10 Kg/cm2, including rubber gasket, flanges, unions, nuts, bolts and washers etc complete as required. 50 mm dia SSR Pag NO. 539 ITEM NO 347

ITEM NO.177 Providing and fixing gun metal ball valves confirming to IS 1703 with threaded/flanged joints complete with nuts, bolts, gaskets etc. 50 mm dia SSR Pag NO. 538 ITEM NO 294

ITEM NO 178 Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body. CSR 12-4-28

ITEM NO 179 Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. SSR 42.54

ITEM NO 180 Supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 V, A.C. supply submersible/centrifugal pump set upto 20 HP consisting of star delta starter having relay range 28-42 A, S.P.P., combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc CSR 12-4-22

ITEM NO 181 Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. CSR 12-4-9

ITEM NO 182 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-27

ITEM NO 183 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. CSR 7-6-10

ITEM NO. 184 Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230 V single phase AC supply with UV fail & filter change indication system. CSR 3-5-2

ITEM NO.185 Light weight impact type sprinkler with SS retraction spring , 1/2" m threaded inlet full circle with bayonet nozzle 2.5 x 1.8 mm giving distribution uniformity more than 88% at 9 x 9 m, 10 x 10 m, 9 x 12 m, 10 x 12 m or 12 x 12 m. operating pressure 3 kgf.IS:12232-1 MCGM GW-4-4-d

ITEM NO.186 Modular sprinkler with plastic stake assembly -operating pressure 1.5 to 3 kgf. flow rate 25 to 400 lph. with nozzle for minimum 90% distribution uniformity at specified spacing MCGM GW-4-4-b

ITEM NO.187 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) SSR 178/535

ITEM NO.188 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) SSR 179/535

ITEM NO.189 P.V.C. pipe 25 mm dia.10kg/cm2 pressure(class IV) SSR 180/535

ITEM NO. 190 Sand Filter 800 Filter, Manufactured by simultaneously injecting fiber and resin. Fitted with PVC collectors, diffuser, pressure gauge, manual air bleed and drain valve. 1.5” PVC Multiport valve and Initial Charge of Filter Media. Make: Pentair and Equivalent Approved MR

ITEM NO.191 Pump for Pool Filter Type : Basket Strainer Hose Power : 4-6 HP Make : Leo and Equivalent Approved MR

ITEM NO.192 Suction Sweeper with Maintenance Kit: Vacuum Head, Floating Hose of 9 Meters Length, 2 x 2.4 M Length Telescopic Handle, Leaf Rake, 18” Wall Brush, pH and Chlorine Test Kit, Make : Emaux and Aarav Enterprises Approved MR

ITEM NO.193 Suction Cover Make : Emaux Approved MR

ITEM NO.194 Vacuum Nozzle Make : Emaux Approved MR

ITEM NO.195 Floor Inlet Make : Emaux Approved MR

ITEM NO.196 Panel Board For LED Lights(Warm Colour) Made from Mild Steel Sheets to house Drivers with controls. Make : Aarav Enterprises Approved MR

ITEM NO.197 Supplying, erecting, testing & commisioning static energy meter with 240V 50 Hz. AC supply 5 to 30 A, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, kVAh,V, I, PF, frequency, kW, kVA, six months history of energy & MD in kW & kVA) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weatherproof PVC wires duly tested by electric supply company. CSR 6-5-1

ITEM NO. 198 Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/32A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on provided angle iron/GI frame. CSR 5-4-13

ITEM NO.199 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB CSR 5-4-9

ITEM NO.200 Supplying, fixing and commissioning 2 pole RCBO up to 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCBO. CSR 5-6-9

ITEM NO.201 Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-6

ITEM NO. 202 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB CSR 5-4-11

ITEM NO 203 Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCBO CSR 5-6-10

ITEM NO 204 Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-2

ITEM NO.205 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 3 core 4 sq. mm. aluminium conductorcomplete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-8

ITEM NO.206 Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW CSR 1-3-2

ITEM NO 207 Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW CSR 1-3-1

ITEM NO 208 Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW CSR 1-3-3

ITEM NO.209 Supplying & erecting mains with 3x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW CSR 1-3-9

ITEM NO.210 Supplying & erecting mains with 4x16 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW CSR 1-3-10

ITEM NO.211 Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. CSR 1-1-7

ITEM NO.212 Supplying & laying HMS PVC conduit 20mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. CSR 1-1-8

ITEM NO.213 Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. CSR 1-1-9

ITEM NO.214 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. CSR 1-1-10

ITEM NO.215 Supplying & erecting HMS PVC conduit 32mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. CSR 1-1-11

ITEM NO.216 Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. CSR 1-1-12

ITEM NO.217 Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL CSR 2-3-19

ITEM NO 218 Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL. CSR 2-3-20

ITEM NO.219 Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. CSR 2-1-4

ITEM NO. 220 Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 2300 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FGODF/ SL. CSR 2-3-2

ITEM NO.221 Providing & erecting 3 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL CSR 8-2-9

ITEM NO.222 Supplying & erecting watertight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 200 x 150 x 150 mm. complete on pole as per specification No. CB-SB CSR 7-8-2

ITEM NO.223 Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.(IP Rated Out Door Quality) CSR 2-1-10

ITEM NO.224 Supplying LED concealed type foot / step light with aluminium body for indoor / outdoor application suitable for 4W - 6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with minimum 1 year warranty as per specification No. FG-IDF/LED. CSR 2-1-12

ITEM NO.225 Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL. CSR 2-4-3

ITEM NO.226 Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FGODF/ PTL.(Fixed on ground/Walls ) CSR 2-4-4

ITEM NO.227 LED type Solar street light fixtures with heat sink for LED, crystalline/ polycrystalline silicon solar PV modules,suitable size of maintenance free battery along with 5.5 mtr , 65mm dia GI pole with civil foundation, base plate, nut , bolts etc and all accessories required for completing installation as per specification. MCGM R3-ME-5-6 Solar street light of 24 Watt LED MCGM R3-ME-5-6-e

ITEM NO.228 Supplying and erecting Gate / garden light fitting with 200mm dia. Glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT. CSR 2-4-1

ITEM NO.229 Supplying and erecting Gate / garden light fitting with 300mm dia. Glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT. CSR 2-4-2

ITEM NO. 230 Supplying and erecting CRCA powder coated light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 , IP20 rated including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. CSR 2-1-19

ITEM NO. 231 Supplying and erecting LED square / circular Max. 7W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED CSR 2-1-2

ITEM NO. 232 Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/ FL. CSR 2-3-17

ITEM NO.233 Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/ FL.(Beam Type) CSR 2-3-18

ITEM NO.234 Light fixtures complete with: a) All fixing accessories, mounting Brackets etc. necessary for completeness of installation. b) Lamp of specified wattage c) Electronic ballast of suitable capacity as per specification SITC of Direct light outdoor floodlight Colour temperature [K]: 3000 MCGM R3-ME-4-1-i

ITEM NO.235 Light fixtures complete with: a) All fixing accessories, mounting Brackets etc. necessary for completeness of installation. b) Lamp of specified wattage c) Electronic ballast of sutable capacity as per specification SITC of IP67 linear surface-mounted LED luminaire. Extruded Hshaped aluminum profile. MCGM R3-ME-4-3-f

ITEM NO.236 SITC of IP67 flexible 24 V linear LED stripColor temperature (CCT) MCGM R3-ME-4-34-h

ITEM NO. 237 Supplying and erecting Energy Saving Ceiling fan of 3 star rating as per BEE 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF CSR 2-9-19

ITEM NO 238 Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board CSR 2-10-9

ITEM NO 239 Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. CSR 2-10-5

ITEM NO 240 Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. CSR 2-10-6

ITEM NO 241 Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW CSR -1-7-6

ITEM NO 242 Point wiring for light/bell concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW CSR 1-7-5

ITEM NO 243 Point wiring for independent plug, concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WGPW/ SW CSR 1-7-7

ITEM NO 244 Point wiring for independent plug, concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG?PW/SW CSR 1-7-7

ITEM NO 245 Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/32A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on provided angle iron/GI frame. CSR 5-4-13

ITEM NO. 246 Supplying and erecting modular type switch 6A/10A on provided plate and box with wiring connections complete CSR 1-6-1

ITEM NO. 247 Supplying and erecting modular type switch 16A on provided plate and box with wiring connections complete CSR 1-6-2

ITEM NO 248 Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base/flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden/3mm thick hylam sheet/ 4mm thick plywood pasted with 1.5mm thick laminate with S M screws and duly connected. CSR 1-5-3

ITEM NO 249 Supplying and erecting shockproof 3 pin plug socket 16A with porcelain base/flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden/3mm thick hylam sheet/ 4mm thick plywood pasted with 1.5mm thick laminate With S M screws and duly connected. CSR 1-5-4

ITEM NO 250 Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete. CSR 1-6-11

ITEM NO 251 Supplying and erecting ceiling rose/ batten holder/ slanting holder/ hanging cord switch/ hanging bell push/ pendant holder bakelite base 6A erected on filled polypropylene board or polished double wooden block/ PVC junction box. CSR 1-5-5

ITEM NO. 252 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-31

ITEM NO 253 Supplying & erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW CSR 1-3-7

ITEM NO. 254 Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete CSR 9-2-5

ITEM NO. 255 Supplying, installing and testing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all accessories of copper materials & recording the results as per specification no. EA-EP CSR 9-1-2

ITEM NO. 256 Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP CSR 9-1-4

ITEM NO. 257 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-32

ITEM NO 258 Supplying, installing, testing and commissioning of 1 kWp OFF-GRID solar power pack with interconnecting wires / cables up to 12 V pure sine wave solar power inverter (THD<3%), SPV Modules (335 WP X 03 Nos.), C-10rated lead acid battery bank 12 V, 400 Ah / (12V, 100 Ah x 4 nos.) suitable for4 Hours backup with suitable MS powder coated stand to hold battery bank andkeeping sufficient space for filling distilled water, canopy box to house inverter and other electronics, wiring up to solar inverter in casing and capping, displayboard, sign board , two distinct earthing, spike type lightning arrester, necessaryaccessories complete with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per specification no. ESD-RT-OFG CSR 4-4-1

ITEM NO.259 Preparing Lawn (30 cm. depth):- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, leveling, and watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, elinning rolling etc complete PARK AND GARDEN DSR

ITEM TO.260 Preparing flower Bed:-Excavating the ground to the required depth of 30cms, Removing and conveying unwanted stuff to a required distance as directed, Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30cms Mixing garden soil and manure thoroughly well, leveling, watering, on previous night. Planting seedlings of required annuals 25cms apart Maintaining till well established by watering. weeding, Stirring replacing of casualties etc, Complete. PARK AND GARDEN DSR

ITEM NO.261 GARDEN SOILSupplying on site garden soil well sieved 90% to pass through IS. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes royalty charges, octroi, corporation Tax Transporting loading -unloading etc (Lead charges per 90 km. considered) PARK AND GARDEN DSR .

ITEM NO.262 FARM YARD MANURE:-Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box.(Farma)Item includes Transporting, loading -unloading etc (Lead charges per 30 kom. are considered) PARK AND GARDEN DSR

Plant should be healthy ,well rooted ,diseased free and free from any pest attack with sufficient moisture around root zone in pollybag. (Wherever applicable)

ITEM NO.263 Sapling of small & medium Ornamental flowering plants, Ornamental ficus, Mussanda etc. Thuja, Cupresus, Common Ornamental Shrubs for Shrubbery PARK AND GARDEN DSR

ITEM NO.264 Palm Varities (Red Palm, Fox Tail Palm, Bottle Palm, Rhaphis Palm, Table Palm, Cristal Palm etc.) 6-8Ft PARK AND GARDEN DSR

ITEM NO.265 Plants required for Landscaping: (Euphorbia, Hemelia, Malpbegra, Mussanda, Ticoma, Song of India, Golden Bamboo, Buddhas Bamboo, Goiden Ficus, Phonicus Palm X'mas Tree, Ficus Panda etc.) 4-5 ft PARK AND GARDEN DSR

ITEM NO. 266 Preparing Shrubbery - Excavating the ground to required depth of 30cms, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proporation to a height of 30cms. Mixing garden soil & manure thoroughly well, leveling, and watering on previous night, planting well developed shrubs plant 0.5 Mtrs. apart as directed and maintaining till well established by watering, weeding, stirring, replacing casualties etc. complete. PARK AND GARDEN DSR

ITEM NO. 267 Forrest Trees (Peltophorum,Bakul,Kecia,Neem,Tabobia,ETC) Annex B(8-10 FEET) PARK AND GARDEN DSR

ITEM NO. 268 Trimming of trees having girth between 2' to 5' MCGM R3-GW-8-2

ITEM No.269 Plant Protection measures for tree having girth between 2'to 5' MCGM R3-GW-8-22

ITEM NO.270 Quisqualis 24indica 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-205

ITEM NO. 271 Bougainvillea purviana Thimma 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-20

ITEM NO.272 Codieum variegatum Hybrid croton 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-37

ITRM NO. 273 Samanea saman Rain tree 4' to 5 ' height excluding pollybag MCGM R3-GW-5-295

ITEM NO. 274 Roheo discolor Rhoeo Nana 4" to 6" height excluding pollybag MCGM R3-GW-5-145

ITEM NO. 275 Roheo discolor Rhoeo Tall 4" to 6" height excluding pollybag MCGM R3-GW-5-146

ITEM NO.276 Delonix regia Gulmohar 4' to 5 ' height excluding pollybag MCGM R3-GW-5-261

ITEM NO.277 Verbena 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-158

ITEM NO.278 Chlorophytum laxum Dwarf Chlorophytum 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-40

ITEM NO.279 Chlorophytum comosum Spider Plant 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-39

ITEM NO.280 Mangifera indica Mango 4' to 5 ' height excluding pollybag MCGM R3-GW-5-284

Bitcon India Infrastructure Developers Pvt Ltd (BID ID -6401025)