Remaning work of campus development and other necessary work for the purposed of security of Civil court premises according to security audit at the samastipur for the year 2026-27

Name of work:-Repair work of Qtr no C-7 in the campus of Officer Colony,Samastipur for the Year 2025-26.

S.NO SOR ITEMS NO NO L(IN FT) B(IN FT) H/D(IN FT) QTY UNIT RATE(RS) AMOUNT(RS)

1 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete

Inner wall area

Total inner wall area=(a)-(b)= 4235.162 sft (A)

guest room 1 13.00 9.916 128.908 sft

passage 1 3.166 3.00 9.498 sft

dining hall 1 9.00 12.583 113.247 sft

kitchen 1 7.00 7.25 50.750 sft

toilet 1 4.25 2.75 11.6875 sft

passage 1 3.916 2.666 10.440 sft

bedroom 1 13.00 9.00 117.00 sft

bedroom 1 13.00 10.00 130.00 sft

headroom 1 21.75 6.416 139.548 sft

Total area=(A)+(B)= 5330.085 sft

2 13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete

parapet 1 26.833 4.00 107.332 sft

3 9.51.1 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.

4 0 455 Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick

5 0 457 Stainless steel SS grade 304, brackets ( curtain rod) 25 mm dia 1.20mm thick

6 9.17.2 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :18 mm thick

7 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including stainless steel butt hinges wirh necessary screws-

7 9.55.2 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. omplete:100x58x1.90 mm

8 9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete:125 mm

9 9.62.1 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm

10 9.63.3 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:150x10 mm

11 9.101.1 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

12 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

13 17.10.2.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm

14 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

15 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.Size of Tile 60x60 cm

16 17.7.1+17.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

17 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

18 6.1.12/1+6.3A Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1 .:4 (1 cement: 4 coarse sand )

19 21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

20 2631 4 mm thick ACP

21 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

22 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

23 approved by S.E Hand faucet 1 each 1200.00 1200.00

24 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore

25 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter

26 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

27 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

28 12.47.2 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick flat

29 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Inner wall area=10% of 4235.162 sft= 423.516 sft (a)

ceiling area=10% of 1094.923 sft= 109.492 sft (b)

outer wall area=15% of 311.996 sft= 46.799 sft (c )

Total area=(a)+(b)+(c )= 579.808 sft

30 13.11.2 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand)

Area vide item no 29(a)= 423.516 sft

Area vide item no 29(c )= 46.799 sft

31 13.24.2 6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand)

Area vide item no 29(b)= 109.492 sft

32 13.78.2 Applying one coat of distemper primer of approved brand and manufacture on wall surface:

Area vide item no (1)= 5330.085 sft

33 13.92.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Area vide item no 29(a)= 423.516 sft

Area vide item no 29(b)= 109.492 sft

34 13.92.2 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Area vide item no (1)= 5330.085 sft

less area vide item no (33)= -533.008 sft

35 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface:

Area vide item no (2)= 311.996 sft

36 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Area vide item no 29(c )= 46.799 sft

37 13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats)

Area vide item no (2)= 311.996 sft

less area vide item no (36)= -46.799 sft

38 13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old steel work (one or more coats)

39 13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old wood work (one or more coats)

40 Carriage cost of Materials

(a) Coarse sand 1.196 cum 2327.73 2783.00

(b) Bricks 11.16 nos 940.97 11.00

41 Extra cost of Materials

(b) Bricks 11.16 nos 362.63 4.00

Add 5.36% extra GST=RS 9032.00

TOTAL RS 177542.00

B.C.D,SAMASTIPUR B.C.D,SAMASTIPUR B.C.D,SAMASTIPUR

Name of work:-Repair work of Qtr no C-7 in the campus of Officer Colony,Samastipur for the Year 2025-26.

MATERIAL STATEMENT

S.NO ITEMS QTY CEMENT C.SAND S.CHIPS BRICKS L.SAND

(sft/cft) (cft) (cft) (cft) (nos) (cft)

2 vitrified floor tiles 61.394 1.105 4.420

B.C.D,SAMASTIPUR B.C.D,SAMASTIPUR B.C.D,SAMASTIPUR

Name of work:-Repair work of Qtr no C-1 in the campus of Officer Colony,Samastipur for the Year 2025-26.

1 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete

Inner wall area

Total inner wall area=(a)-(b)= 4252.243 sft (A)

guest room 1 13.00 9.916 128.908 sft

passage 1 3.166 3.00 9.498 sft

dining hall 1 9.00 12.583 113.247 sft

kitchen 1 7.00 7.25 50.750 sft

toilet 1 4.25 2.75 11.6875 sft

passage 1 3.916 2.666 10.440 sft

bedroom 1 13.00 9.00 117.00 sft

bedroom 1 13.00 10.00 130.00 sft

headroom 1 21.75 6.416 139.548 sft

Total area=(A)+(B)= 5347.166 sft

2 13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete

front wall 1 26.333 10.00 263.330 sft

3 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Inner wall area=12% of 4252.243 sft= 510.269 sft (a)

ceiling area=10% of 1094.923 sft= 109.492 sft (b)

outer wall area=12% of 311.996 sft= 79.979 sft (c )

Total area=(a)+(b)+(c )= 699.740 sft

4 13.11.2 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand)

Area vide item no 3(a)= 510.269 sft

Area vide item no 3(c )= 79.979 sft

5 13.24.2 6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand)

Area vide item no 3(b)= 109.492 sft

6 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

7 approved by S.E Hand faucet 1 each 1200.00 1200.00

8 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter

9 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

10 9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

11 N.S S/F/F 1H.P Submersible motor 1 each 16800.00 16800.00

12 0 L01 Unskilled labour for cleaning room,septic tank

13 15.7.4 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:In cement mortar

septic tank 2 13.166 0.833 3.00 65.804 cft

14 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1 .:4 (1 cement: 4 coarse sand )

septic tank 2 13.166 0.833 3.00 65.804 cft

15 5.9.20 Centring and shuttering including strutting,propping etc. and removal of form for.Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick.

16 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size).

17 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm diameter

18 0 455 Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick

19 0 457 Stainless steel SS grade 304, brackets ( curtain rod) 25 mm dia 1.20mm thick

20 13.78.2 Applying one coat of distemper primer of approved brand and manufacture on wall surface:

Area vide item no (1)= 5347.166 sft

21 13.92.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Area vide item no 3(a)= 510.269 sft

Area vide item no 3(b)= 109.492 sft

22 13.92.2 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Area vide item no (1)= 5347.166 sft

less area vide item no (21)= -619.761 sft

23 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface:

Area vide item no (2)= 666.488 sft

24 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Area vide item no 3(c )= 79.979 sft

25 13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats)

Area vide item no (2)= 666.488 sft

less area vide item no (24)= -79.979 sft

26 13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old steel work (one or more coats)

c/wall grill 2 4.25 2.916 1.00 24.786 sft

27 13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old wood work (one or more coats)

28 13.81.1 Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood)

29 13.82.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:New wood work (two or more coats)

30 13.17.2 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a floating coat of near cement Details of cost for 10 sqm

31 5.22.7A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars TMTC-500-8mm dia.

Qty vide item no (16)= 23.041 cft

32 Carriage cost of Materials

(a) Coarse sand #REF! cum 2327.73 #REF!

(b) stone chips #REF! cum 1805.00 #REF!

(b) Bricks #REF! nos 940.97 #REF!

33 Extra cost of Materials

(a) Cement #REF! bag 5.50 #REF!

(b) Bricks #REF! nos 362.63 #REF!

Add 5.36% extra GST=RS #REF!

B.C.D,SAMASTIPUR B.C.D,SAMASTIPUR B.C.D,SAMASTIPUR

BILL OF QUANTITY

Remaning work of campus development and other necessary work for the purposed of security of Civil court premises according to security audit at the samastipur for the year 2026-27

ESTIMATED COST Issued To

EARNEST MONEY Reg no.

TIME OF COMPLITION

Sl.no. SOR ITEM OF WORK QTY Qty. Unit Rate Amount

1 0L01 Providing Labour for site clerance (Stationary shifting , Almirah,rack etc.)

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All Kinds of soil

3 24.1.1.3 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.400 mm dia

Two wheeler parking 32.00 3.50 112.00 m

ADR Building 20.00 3.50 70.00 m

Shed for DFMD 12.00 4.50 54.00 m

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

5 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

6 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

7 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring , shuttering , finishing and reinforcement-All work puto plinth level

footing 10 1.2 1.2 0.30 4.32 cum

trapezoidal 0.067 10 2.18 1.45 cum

drain cover 1.00 125 0.75 0.10 9.38 cum

8 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Quantity vide item no. 7

100kg/cum 5270.00 Kg

9 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

5.9.1 Centring and shuttering including strutting,propping etc. and removal of form for.

5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts

10 10.32.2 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works

ADR building 1 30.00 6.00 180.00 sqm

11 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes

150mm dia Post 74 6 444.000 m

12 12.64X.2 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling /tapping Stainless steel screws M6, 60 mm long with 3mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).0.71 mm, troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.

13 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l,

14 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood)

area vide item no 13x50% 361.89 sqm

15 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

16 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm diameter

17 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

18 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete

17 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand )

18 13.11.4 Cement plaster in course sand 1:6(1 cement: 6 coarse sand)

19 13.78.1+13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Applying one coat of cement primer of approved brand and manufacture on wall surface: New work (three or more coats)

20 21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Partition 1 10.00 9.16 91.60 sft

Partition 3 21 9.16 577.08 sft

Partition 1 9.92 9.16 90.87 sft

Partition 2 11.25 10.66 239.85 sft

Partition 1 11 10.66 117.26 sft

21 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness(weight not less than 12.50 kg/sqm)

22 supply/2631 4mm thick ACP sheet

Partition 1 9.75 9 87.75 sft

Partition 3 20.75 9 560.25 sft

Partition 1 9.66 9 86.94 sft

Partition 2 11 10.42 229.24 sft

Partition 1 10.75 10.42 112.02 sft

23 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

24 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1 .:4 (1 cement: 4 coarse sand )

25 5.3+5.33B4 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size).Providing M-15grade R.C.C instead of M-20 grade R.C.C.

26 13.17.1+13.36.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement,Extra for providing and mixing water proofing material in proportion recommended by the manufacturers:12 mm cement plaster 1:3(1 cement :3 sand).

27 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

a 5.9.3 Centring and shuttering including strutting,propping etc. and removal of form for Suspended floor/roof 21.75 21.750 sqm 437.5 9516.00

b 5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for beam 5.01 5.010 sqm 404.7 2028.00

28 Carriage cost of Materials

29 Extra cost of Materials 0.000

Total RS 3836664.00

Add 5.36% extra GST=RS 201944.00