Lot-5

Amount

Earth work in foundation in dry ordinary soil (Loam, clay or sand) including lift upto 1.50 m and lead upto 30 m and including filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal of surplus earth including manual Compaction of earth.

P.C.C. work 1:4:8 C.C. with cement, coarse sand and 20-40 mm stone grit with mechanical mixing, compaction with vibrator & proper curing including all materials, labour, T&P etc

Supplying and placing in position of Reinforcement (TMT bar fe500) including cutting, bending, binding (with 16 SWG binding wire) and including labour, tools & plants, carriage, loading unloading and stacking of all materials at site.

R.C.C. work 1:1.5:3(M20) R.C.C. with cement, coarse sand and 20 mm stone grit with mechanical mixing, compaction with vibrator & proper curing including all materials, labour, T&P etc.

Centering & Shuttering OF CC work including rent of shuttering material, labour and T&P etc.

M-150 class brick work 1:4 cement & c.sand mortar proper curing including all materials, labour, T&P etc

Cement plaster 12.5 mm thick in 1:4 Cement mortar on local Sand with proper finishing including all materials, labour and T&P, etc

Finishing wall with water proofing cement paint of approved make and quality on new work with 2 coat to give and even shade.i/c cost of material,Lobour,T&P etc.

Providing and fixing concertina coil fencing with punched tape concertina coil 450 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (including cost of M.S. angle)

Steel Maim Gate i/c cutinng,welding,fabrication as per drawing i/c cost of material,labour,T&P etc.

Painting 2 coat over priming coat new surface with cost of material etc.

M/S VINOD KUMAR SHUKLA

M/S DIXIT CONTRACTORS