SPL REPAIRS TO SEWAGE PIPELINE CONNECTING ECCU SUMP TO EXISTING SEWAGE LINE ADDN ALTN TO BLDG NO P25 FOR TEN WOMEN MP PROVN OF CEILING WALL MOUNTED FAN AND ALLIED WORKS AT SOUTH BARRACK PROVN OF TEMPORARY SHED FOR 04 NOS CAR PARKING IN FRONT OF ADV H

Amount

SCHEDULA 'A' PART-I (B/R PORTION) Demolition of cement concrete in ground floor and pavings n exc. 15 cm thickness complete all as specified and directed.

Demolition of cement conc (unreinforced) of any description and in any position complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (re-inforcement cut as required to facilitate demolition) and removing the rubish off the premise complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Surface excavation n.exc 30 cm deep and averageing 15 cm deep and getting out soft and loose soil.

Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out as directed by the Engineer-in-Charge.

-do- all as per item No 7.00 above but depth exc 1.5m and n exc 3m deep.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated material (soil) at a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M&L excavating in post holes (or similar holes) each in soft/ loose soil n exc 0.5 cum , getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm , watering , and removing surplas soil to a distance n. exc 50 cm and making good surface complete all as specified and directed.

Earth filling under floor incl spreading, levelling in layers not exceeding 25 cm thick & well ramming including watering as required complete all as specified and directed. Note :- Earth obtained from excavation shall be reused.

M&L for hardcore of broken stone of gauge exc 63mm but n exc 100 mm , deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled / rammed to a true surface under PCC Platform complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundation, filling and mass concrete all as specified and as directed.

M&L for cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundation, filling and mass concrete all as specified and as directed.

Materials and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, copings, kneelers, apex stones, bed plates etc complete all as specified and as directed.

M&L PCC (1:2:4) Type B-1 using 20mm graded stone aggregate as in kerb/benching/coping/ channels/ blustering like including weathering, slightly rounded or chamfered angles and wirth necessary use and formwork for manholes with all necessary complete allas specified.

M&L for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain complted all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitred/stopped ends etc complete all as specified.

M&L for RCC Type B1 1:2:4 (20 mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and Chajjas and in shelves and the like (Upto 4th story bldg) complete all as specified and directed.

M&L for RCC nominal Mix (using 20 mm graded stone aggregate) as in beams , cantilevers , bressummers , lintels over 1.5 m span complete all as specified and as directed .

M&L brick work with sub class ‘B’ fly-ash brick straight or curved on plan exe. 6 meters mean redius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' fly-ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class `B’ fly-ash bricks, straight on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

M&L for use and waste for form work to sides and soffits of floor or roof beams , beam haunching, girders, bressummers , lintels , cantilevers , shelves including supports , overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed

M&L for use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete (Upto 4th story bldg) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L 10mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished even and smooth without using extra cement including necessary scaffolding complete all as specified and directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in cement mortar (1:4) complete all as specified and directed. (NOTE: Top layer shall be mixed with water proofing compound @ 3% of the weight of cement. WPC shall be measured and paid seperately)

Supply only integral water proofing compound.

M&L Rending 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finishing fair and rough complete all as specified and directed.

M&L for two coats of cement base paint including preparation of new plastered surface of wall complete all as specified and directed.

M&L for two coat of cement base paint over a coat of cement primer to new surfaces of wall including preparation of surface complete all as specified and directed.

M&L cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles or machined in pullevs and similar articles complete all as specified and directed.

M&L for cutting 150mm bore sewage pipe (any description) in position and blocking up end with cement concrete (1:2:4) type B1 for a depth of at least 30 cm from the cut made complete all as specified and directed. NOTE: Earthwork shall be measured seperately.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (20 mm graded stone aggregates) smooth finished and reforming benching as reqd for 150 mm bore pipe complete all as specified and directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust complete all as specified and directed.

M&L for PCC (1:4:8 ) type D-2 (40mm graded stone aggregate) as in sub base finished even and rough, 75mm thick complete all as specified and directed.

M&L 75mm thick PCC ,C-2(1:3:6), (using 40mm graded crushed stone aggregate) as in sub base / plinth protection of concrete finished even and fair without using extra cement complete all as directed..

Material and labour for Plain Cement concrete type B-2, P.C.C (1:2:4) (40mm graded stone aggregate) as in base in floor, 100mm thick, finished even and fair complete all as specified and directed.

M&L 75 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor finishes finshed even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-0, (12.5mm graded aggregate) 25mm thick as in PCC underlayer finished even and rough to receive cement screed complete all as specified and directed.

M&L Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/ Tiles complete all as specified and as directed.

M&L for Joint free Coloured Non Skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Glazed ceramic Coloured Tile 300X200X7mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match, complete all as specified and as directed.

M&L for 18-16 mm thick granite (of any type) work in platforms, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length , bent to shape required including cranking , bending spirally for hooping for column , hooking ends as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

Supply and fixing mild steel TMT bar 6mm to 8mm dia, cut to length , bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire (annealed ) not less than 0.90 mm dia complete all as specified and directed .

S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

M&L mild steel flat iron for hold fast, cut and bent to size required, conforming to Fe-410-0 or 310-0 complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels commercial type on both sides complete all as specified and directed.

M&L 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to recieve glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauge wire mesh complete all as specified and directed.

S& F 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.

S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frames shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert or top & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement fixed in PVC frame complete all as specified and as directed.

S&F steel windows with side hung shutters incl projecting type hinges with steel handles peg stays complete with glazing bars suitable for fixing Glass dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters incl box type hinges with steel handles peg stays complete without glazing bars suitable for fixing gauzed dovetailed or welded complete all as specified and as directed.

S&F steel ventilators with top hung shutters incl, hinges, steel peg stay, complete all as specified and as directed.

S&F MS guard bar for steel and wooden windows conforming to FE-290, Grade E-165 complete all as specified and as directed.

S&F anodised aluminium alloy curtain rails including fixing brackets & all necessary fittings complete all as specified.

M&L for PCC (1:3:6) type C-1 (20 mm graded stone aggregates) as in hold fast block etc complete all as specified and directed.

S&F MS butt hinges, cold rolled medium weight 100mm in size complete all as specified and directed.

S&F aluminium anodized barrel tower bolts of extruded section 150mm in length complete all as specified and directed.

S&F aluminium handle, cast type 150mm in size complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Cutting existing 20mm dia (bore) steel tubing for alteration or additions (each cut measure) complete all as specified and directed.

Screwing existing 20mm steel tubing for alteration or additions (or lenthening screw on pipe to form connector) complete all as specified and directed.

Supply and fixing of Chlorinated Polyethylene Chloride (CPVC) pipes 15 mm outside dia, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. With suitable size MS clamp of spacing 1.00 mtr etc pipe line including taking down existing pipe line complete all as specified and as directed.

Supply and fixing of Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. With suitable size MS clamp of spacing 1.00 mtr etc pipe line including taking down existing pipe line complete all as specified and as directed.

S&F for 1000 Ltrs rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of multi-layer, ISI marked, hoisted and fixed in position including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe all as specified in SSR Part-l, complete all as directed.

S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 153 or equivalent model in JEXON / POLYTUF / SHAKTI)

Cutting chases, pinning in making good to facing where required and pointing in cement mortar(1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting not exc 10cm girth in brick or boulder wall complete all as directed.

S&F vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental or equivalent model in HINDWARE / CERA)

S&F for 100mm dia cast iron sanitary connection socket to fit WC outlet complete all as directed and as directed.

S & F of vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, with 32mm dia Brass Chromium Plated Waste Fitting complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C or equivalent model in PARRYWARE / PRAYAG)

Supply and fixing, 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with hot and cold mixer, with long screwed shalnks and fly nuts, screwed for iron pipe and , complete all as specified and directed. (MAKE : JAQUAR, Cat No : CON-167KNB / PRAYAG, Cat No : 9250 / CERA, Cat No: F3002461 / PARRYWARE, Cat No: G4615A1 /ESS ESS, Cat No: C-211A / HINDWARE, Model: CONTESSA PLUS)

Supply & Fixed PVC valveless, syphonic action type, flushing cistern, low level, coloured, with inlet , ball valve, float and handle including brackets outlet flushing pipe of capacity 10 ltrs complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Fresh / CERA, Model : Corona or equivalent model in COMMANDER / PRAYAG)

S&F Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

Supply and fixing 15 mm bore stop cock (surface type), cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. (MAKE : ESSCO, Cat No : DLX-513A/513B / PRAYAG, Cat No : 8326/8328 / ESS ESS, Cat No: C-253/C-253A)

S&F 15 mm bore Gun metal gate valve as per IS : 778-84 Class-1 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions complete as all specified and as directed.

S&F chromium plated brass angular stop cock with wall flange as in repair fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-059KN / PARRYWARE, Cat No: G0607A1 / CERA, Cat No: F2003201 /Ess Ess, Cat No: C-204 / HINDWARE, Cat No: F330043)

S&F concealed stop cock with body, 15mm bore cast copper alloy cromium plated fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed (MAKE : JAQUAR, Cat No : CON-069FTK / PARRYWARE, Cat No: G0161A1 / CERA, Cat No: F3002361 / PRAYAG, Cat No: 9218 / / HINDWARE, Cat No: F330052 /ESS ESS, Cat No : C-206 )

S&F chromium plated brass Bib cock long body with wall flange, fixed to 15mm bore of iron pipe complete all as specified and directed. (MAKE : JAQUAR, Cat No : CON-107KN / PARRYWARE, Cat No: G0604A1 / CERA, Cat No: F2003151 / HINDWARE, cat No: F330011 / ESS ESS, Cat No : C-209 )

S&F looking mirror 5-5.5mm thick glass including all sides rounded and bevelled to true surface fixed to wall with 5 mm th. Ply and CP nut& bolt contersunk type complete all as specified and directed.

S&F chromium plated front glass shelf of size 460mm x 130mm fixed to wall with chromium plated screws complete all as specified and as directed. (Make: ESS ESS, Cat No: 207 / CERA, Cat No: F5001114 / PARRYWARE, Cat No: T6009A1 / JAQUAR, Cat No: AQN-7771 / PRAYAG, Cat No: BEA-45)

S&F for 40mm dia PVC (LDPE) pipe of pressure rating 6 Kg/Sqm fixed in position complete all as specified and directed.

Supply and Fixing Tubular towel rail, 20mm dia, D type, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : ESSCO, Cat No : AEC-1111 / PRAYAG, Cat No : BA-10 / ESS ESS, Cat No: AC-101 / HINDWARE, Cat No: F840013)

S&F chromium plated brass over head shower rose with arm fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : CERA, Cat No: F7020102 / PARRYWARE, Cat No: T9984A1/ESS ESS, Cat No: OH-107A / PRAYAG, Cat No: BS-29 / HINDWARE, Cat No: F160039)

S&F PVC (SWR) pipe 75 mm outer dia single socketed in any length with rubber ring jointed to wall/floors complete all as specified and directed.

- ditto- but 110 mm outer dia pipe

S&F PVC (SWR) junction double, T equal or unequal with door bend 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm bore complete all as specified and directed.

S&F PVC (SWR) floor traps plain with grating incl jointing with solvent of 75mm bore complete all as specified and directed.

S&F Grating doom 5" mm dia with waste hole, chromium plated complete all as specified and directed.

Supply, laying, jointing with cement mortar 1:2 and testing 300mm bore dia (internal) reinforced concrete pipe, class NP2 complete all as specified and directed.

-Ditto- but 200 mm bore RCC pipe

-Ditto- but 150 mm bore RCC pipe.

Supply, laying, jointing and testing Salt glazed stone ware drain pipe grade ‘A’, 150mm dia laid in trenches complete all as specified and directed.

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 300 mm bore including forming cradles after they are laid and tested complete all as specified.

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 250 mm bore including packing under and haunching against the sides of pipes after they are laid and tested completed all as specified.

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 150 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested completed all as specified.

M&L Concrete bed to drain pipe and including packing under haunching against the sides of pipe and after they laid and tested in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for pipe 150 mm dia bore complete..

Material and labour for applying one coat of oil bound distemper to old decorated surfaces of walls including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots ) complete all as specified and as directed.

M&L for preparation of old Ceiling surface and applying one coat of oil bound distemper including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying two coat of oil bound distemper over a coat of alkali resistant primer to old decorated surfaces of walls complete all as specified and as directed.

M&L for complete removal of existing treatment of old Ceiling surface and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for applying two coats of oil bound distemper over a coat of primer on newly surfaces of walls including necessary preparation of surface complete all as specified and as directed.

M&L for applying two coats of synthetic enamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for applying two coats of synthetic enamel painting over a coat of red oxide primer on new steel surfaces exc 10 cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for Two coat of synthetic enamel paint over one coat of red oxide primer to the steel and iron surfaces of any description , n exc 10 cm in width or girth,when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

M & L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

M & L for plate girder or single stanchions built up of one beam or chennel section with flange plates, caps, bases, splices, angle brackets cleats and other connected plates Fe 410 -W (Gde-E-250) quality-B complete all as specified and as directed.

M&L for Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E-250) quality-B complete all as specified and as directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde-E-250) quality-B complete all as specified and as directed.

M&L for 40x6 mm MS flat iron as wind tie complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

M & L for Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) Set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members - Weight per square metre - Exc 4 kg complete all as specified and as directed.

M&L Preparing new plastered Surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L 2nd class hard wood plain fillets. square, rectangular or triangular in section n exc 3 sqcm , clean sawn, secured with nails or brads complete all as specified and directed.

M&L 2nd class hard wood plain fillets. square, rectangular or triangular in section exc 3 sqcm but nexc 6.00sqcm , clean sawn, secured with nails or brads complete all as specified and directed.

M & L for 18/19mm thick block board, grade-1quality, exterior grade commercial type, fixed to screw to timber frame works complete all as specified and directed.

M & L for 0.9mm thick decorative laminate type-1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture's instructions complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete including taking down existing sink complete all as specified and directed. (MAKE : PRAYAG, Cat No. 1239-D or equivalent model in NIRALI / DIAMOND / ANJALI / JAYNA / BLUE STAR / CERA)

S&F 15mm bore chromium plated sink cock with raised 'J' shaped swinging spout (table mounted model) complete all as specified and directed. (Make : JAQUAR, Cat No: CON-359KN / ESS ESS, Cat No: C-260 / PRAYAG, Cat No: 9214 / CERA, Model: OCEAN or equivalent model in PARRYWARE / HINDWARE)

Material & labour for galvanized steel water tubing 15mm bore pipe medium grade with all fitting and fixed in wall/ ceiling laid in floor complete all as specified and directed.

S & F brass 4 lever locks, Cupboard, grade-1, size-50mm complete all as specified and directed.

S&F 75 mm Butt hinges, Medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75mm long aluminium, anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 75 mm size brass handles, cast type, polished bright complete all as specified and directed.

SCHEDULE 'A PART-II (E/M PORTION) 'Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No. 140 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 140 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 140 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 1.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed. (concealed type point wiring with terminal box).

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed.

All as per item No. 144 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 144 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 144 above but using 4.0 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 4.0 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed and directed.

Supply and fixing of switch socket outlet combination 3 Pin, 5 Amps, 240 volts flush type (non shuttered) complete all as specified and directed.

Supply & fixing of socket outlet 2 in 1, 3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified and directed.

Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified and directed.

S&F Fan Regulator electronic rotary, step type 120 Watt, 240 Volt 50 Hz complete all as specified and directed.

Supply and fixing lamp holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified and directed.

Supply and fixing of ceiling rose surface PVC/Polycarbonate, three terminals complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised iron strip of size 25x4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed. (Note: No extra payment shall be made for the earthing strip of size 25x4 mm)

Supply & fix exhaust fans light duty AC single phase 230/ 240 V of size 250 mm sweep plastic body with louvers with and including twin core twisted flexible copper conductor cable of size 1.0 sqmm (nominal area) from ceiling rose to fan including making circular hole in existing wall to accommodate exhaust fan and necessary civil work and making good the disturbed surface complete all as spcified and directed. (Make:Havells, Cat No. Ventil Air DX White / CROMPTON, Model: VENTILUS / USHA, Model: CRISP AIR)

S&F for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 32x6 mm, 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles/bldgs for security including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supply and fixing LED light fitting 18 watts with and including LED tube rod 4 feet long suitable for single phase 230 Volts, 50 Hz AC supply complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (MAKE OF BATTEN: BAJAJ, Cat No: BLRB-DB 118 / HAVELLS, Cat No: REGAL BATTENT8 UPTO 1X22WSSBSWH / HALONIX, Cat No: HLCB-01-1XT8-2S / JAQUAR, Cat No: LINDAPATI118X /CENTURY LED LTD, Model: COFFER / CROMPTON, Cat No: : DMLN1LT8-16 / SURYA, Cat No: SUB 118 T8 LED or equivalent model in PHILIPS / HPL/SIMOCO) (MAKE OF TUBE ROD: BAJAJ, Cat No: BLRB 18W CW LED /HAVELLS, Model: TITANIA NEO / HALONIX, Cat No: HLTLD-04-18-CW / SURYA, Cat No: SLE TL-DS 18 P / JAQUAR, Cat No: LTBL01X018XC / PHILIPS, Cat No; MAS LEDtube 1200 mm 18W856 T8 I or equivalent model in CENTURY LED LTD / BAJAJ / CROMPTON / HPL/SIMOCO)

Supply and fix 25 Watt LED Street light fitting, pressure die-cast aluminium roadway luminaries with high powered LED (having minimum efficacy of 100 lumen/watt) with secondary optics including surge protection, constant current driver with in built protection against lightning, over voltage & short circuit, LM6 Housing, IP 66 with operating voltage range 140 to 270 V with complete with all accessories complete all as specified and directed. (Make: SURYA, Cat No: SLE UL 25W IP66 LXN / LSRT01S025XW / HAVELLS, Model: ENDURA PEARL / HALONIX, Model: LUMOX MINI / CROMPTON, Model: PINNACLE NEO / SIMOCO, Cat No: SLSL25WL / HPL, Cat No: HPLLEDSL2560P) (NOTE: Bracket and wire for electric connection shall be measured and paid separately)

NOTE FOR ITEM NO. 158 & 159:- (1) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of work. The product will be replaced free of cost in following cases :- (a) Manufacturing Defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 metre) below 90% of claimed value of lumen (or lux at 1 metre) of the LED/luminaire. (d) Decision of GE in this regard shall be final and binding. (2) All LED/luminaire shall meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/Section 13. (3) The contractor shall submit the LM-80 and LM-79 test report as specified in Particular Specifications. (4) Even though specific catalogue number of the above mentioned manufacturers have been specified, it shall be ensured prior to sample approval that the products comply with the description of item mentioned in BOQ and specifications laid down in the tender.

S&F PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection to light fittings including with suitable size copper lugs complete all as specified and as directed

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC conduit of suitable size, concealed type complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit of suitable size, concealed type complete all as specified and directed. (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

Supply & fix wall mounting fans 230 volts single phase oscillating 300 mm sweep complete all as specified and directed (Make : Havells, Model: Swing / Crompton, Model : Wind Flo / Usha, Model: Maxx Air Dew)

Supply, installation, testing and commissioning of heater water storage type electric geyser (vertical cilyndrical type) 25 ltrs capacity with BEE 5 star rating (min) and ABS body, porcelain enamel glass lined inner tank incl fixing arrangement with providing incl suitable capacity flexible cable 3 core with 3 pin plug of 16 amp complete all as specified and directed. (Make: Havells, Model: Monza EC / RACOLD, Model - Altro 2 Plus / CROMPTON, Model- Arno Deluxe /VENUS, Model- Magma)

Supply only chromium plated copper pipe 15 mm dia, length not less than 45 cm including PVC washers for incoming and outgoing hot and cold water incl all necessary fitting materials complete all as specified and directed.

S&F ceiling fan 1400 mm sweep complete AC single phase 230 Volt 50 HZ connecting with flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan including all hanging arrangement complete all as specified and as directed. (Make : Havells, Model: Velocity / Crompton, Model : Riviera or equivalent model in USHA / BAJAJ)

S&F wall mounting fan 400 mm sweep complete AC single phase 230 Volt 50 HZ pull cord oscillating type single piece AS blade 3 speed pull cord control complete as directedbody, including making suitable hole and all accessories for fixing. (Make : Havells, Model: Swing / Crompton, Model : Wind Flo / Usha, Model: Maxx Air)

S&F SPN DB, IP 43 protection, double door, 240 volts, 4 way complete all as specified and directed. (MAKE : LEGRAND, Cat No. 507610/ L&T, Cat No. DBSPN004DD / ABB, Cat No. NSYN8690SPN0M04 / SCHNEIDER, Cat No. NBKRENSNDD04 or equivalent model in INDO ASIAN (OPTI PRO) / C&S / HAGER )

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : LEGRAND, Cat No. 507611 / L&T, Cat No. DBSPN008DD / ABB, Cat No. SHC M 8 / SCHNEIDER, Cat No. NBKRENSNDD08 or equivalent model in HAVELLS / INDO ASIAN (OPTI PRO) / C&S / HAGER)

S & F MCB 'C' series SPN 63 Amps, breaking capacity 10KA complete all as specified and directed.

Supply & fixing in repair of MCB SPN 32 Amps 'B' Series 10 KA 240 volts complete all as specified and directed.

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

S & F MCB 'C' curve Triple pole neutral , 40 Amps with breaking capacity 10kA complete all as specified and directed.

S&F steel medium grade pipe 50mm bore dia for hanging of Ceiling fan including necessary civil works for fixing of pipe complete all as specified and directed.

S&F GI tubing medium grade of size 15 mm dia incl painting and making hole for extention of fan hook in high roof ceiling complete all as specified.

M & L for Fan hook MS Flat iron suitable for hanging ceiling fan complete all as specified and directed

S & F PVC insulated & PVC sheathed 3 core copper multi strand flexible cable, of cross-sectional area 4 sq mm incl necessary copper lugs etc to connect MCB/MCCB/ contactor etc incl necessary incoming & outgoing elect connections, conduit pipe copper lugs, complete all as specified and directed.

M&L for supplying, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 core with necessary incoming & outgoing elect connections, copper lugs, etc. complete all as specified and directed.

S & F Direct on line starter in Sheet-Steel Enclosure Type MN 16 DOL (Motor Rating AC-3 Duty, 415V, 50Hz, 3Ph) suitable for 3 HP, 2.2 KW motor including necessary incoming & outgoing elect connections , copper lugs, etc. complete all as specified and directed. (Make : L&T, Cat No SS94351 or equivalent model in BCH / HAVELLS / INDO ASIAN / HPL). Note : DOL starter to be fixed/mounted on wooden board of required size as per dimensions of item and fixed on angle iron legs of size 40x40x6 mm duly grouted in ground with necessary nut bolts, pcc and foundation work. Rate for the same deemed to be included in the quoted rate above.

Supply, laying and testing 25 mm bore GI tubing (medium grade) with new fittings, fixed to wall / ceiling or laid in floor as directed by Engr-in-Charge.

Supply and fixing in repair 25 mm bore Gun metal gate or globe valve with iron wheel head, screwed both ends for iron pipes or for unions, all as per IS-778-84 Marked Cl-1 Pressure tested 2.4 Mpa complete all as specified and directed.

Supply, install, testing and commissioning of 2.2 KW Watt 3 HP 415 V, heavy duty 3 piston high pressure car washer machine complete with gun metal pressure nozzle, 30 ft delivery hose pipe, suction pipe with filter etc for vehicle washing complete all as specified and directed. (Make : General Engineering Works, Model: GC/36/30 or equivalent make as approved by GE) Note : Any item required for installation and smooth functioning of the car washer including foundation work shall be deemed to be included in above quoted rates. Pipe line for supply of water shall be measured and paid seperatelly.

S&F MCCB 3 pole 18 KA breaking capacity, current rating 20 Amps, type DU-100 D with thermal magnetic release, adjustable overload setting 0.8 - 1.0 x In, enclosed in suitable SS enclosure and fitted/mounted on panel/channel as per site requirement complete all as directed by the Engr-in-Charge. (Make : L&T, Cat No: CM90517OOCO or equivalent in LEGRAND / SCHNEIDER / ABB / HAGER / INDO ASIAN (OPTI POWER)

Supply, installation, testing and commissioning electrical wall mounted chimney and external Hood, minimum air suction capacity 1200 CMH complete set including all accessories complete all as specified. (Make: Bosch, Model: DKE908PIN 90 / GLEN, Cat No: GL 6062 SS 90 1250M3 / FABER, Model: Stilux Energy 60 or equivalent model in KAFF / HINDWARE)

Supply and fixing single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 'C' Curve, 10 KA including all accesories complete. (MAKE : LEGRAND, Cat No. 607843 / L&T, Cat No. DBMPS220SD / SCHNEIDER, Cat No. A9HMS220/C&S, Cat No: CSDBPSSPN020 or Equivalent Model in ABB/INDO ASIAN (OPTI PRO) / HAGER) (NOTE : Enclosure & MCB shall be same manufacturer)

Supply and fixing triple pole and neutral enclosure with three pin and earth plug and socket complete with one triple pole MCB, 32 Amps, 'C' Curve, 10 KA including all accesories complete. (MAKE OF ENCLOSURE : L&T, Cat No. DBMPS432SD / LEGRAND, Cat No: 5078 18 / HAGER, Cat No. VYA432C or Equivalent Model in SCHNEIDER / INDO ASIAN (OPTI PRO)/ABB) (NOTE : Enclosure & MCB shall be same manufacturer)

Abhijit Banerjee

ARJUN DAS VALECHA

DEB AND COMPANY

R.K.TRADING CO. INDIA

MS HORIZEN

UNIVERSAL TRADING CENTRE

S.K. TRADERS