Construction of Vahanamandapam and Cut Stone flooring for prahaham

Removing the cut stone slab finish in lime mortar without affecting the adjacent structures including the cost of required tools and plants, if necessary and clearing the debris away from the site etc., all complete and as directed by the departmnetal officers.

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with Stone Dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling Crushed Stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Centering for curved surfaces of all RCC items of work

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation Basement

Ground floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Foundation Basement

Ground Floor

Supply of cut stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other Temple Structures

Cut stone 0'Feet and Upto 5'feet

Cut stone 5'Feet and Upto 10feet

Cut stone 10'Feet and Upto 14feet

Labour charges for fixing and dressing of required of size including cost of labour charges etc complete scoffloding including pointing with lime mortor 1:1.5 etc complete with standards specifications.

Old Thoon (pillar) Fixing

New Thoon (pillar)

Ulvari

Veeraganda pothiyal

Brick work in following Cement Mortar using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Foundation and Basement CM 1:5

Ground floor CM 1:6

Brick masonry in C.M1:4 using brick including all varivargams, moulds, sthambams, mukapathrams, koodu, Nasi and all ornamental brick work complete,all pancharams, Agarais, karnakoodus,etc., forming core walls of Rajagopuram /Vimanams complete including cost and conveyance of all materials including cement,ball the labour charges including mrking pathies shaping ofthe bricks,lifting of all the materials to required heights,curing and all extra for working in heights etc., complete 100cft.

Kalkaram of Gopuram/Vimanams

Providing vargapoochu over the core walls of vimanam/gopuram with cm 1:4 complete including shaping the mukhapathram ,mahanasi ,koodu all ornamental works to proper shape by embedding broken bricks or shaped /chiselled bricks,rough plastering with cm 1:4and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials,labour therefore,lifting of materials,all working in heights,curing with water etc., complete including all extra for folding and including clearing the debris from the vimanams/ Gopurams-100sq.ft superficial area.

Kalkaram of Gopuram/Vimanams

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used, hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Flooring with cut stone block size upto 600mmx600mm length not less than100mm thick and similar varities with machine cut edges fixing the slabs with required and pointing with combination mortar 1:1:5/ Cement mortar 1:3/ Lime mortar 1:1:5 etc.,complete The cut stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Single Line Dressing

Labour Charges for Old Stone Fixing Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, Bodhiyal, Uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull Vari, Pavukkal, Thun, Flooring, Nilaikal, Bodhiyal Thani, Uthiram.

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed Water based Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Three coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting with multicolour (Panchavarnam) good water based emulsion paint complete for the Vimanams and Gopuram including cost and conveyance of all materials,Labour charges including Artist painter, working in height , lifting of material,cost of brushers etc, complete which including all extra for folding-100sft super ficial.areat.

Vimanam/Gopuram of height upto 15'0" (Excluding kalkaram)

Providing new sudhai vigraham in the vimanams and Rajagopurams with Galvanished iron rod reinforcement of suitable dia with binding wires wherever necessary shaping the core with broken bricks in C,M.1:3 finishing the same with C.M.1:3, bringing to the correct shape(Lakshana)in conformity with silpa sastra inclusive of special ornaments,Weapons, peedam etc., compete and providingC.M. Nayam theervai where ever necessary, inclusive of cost and conveyance of all materials, such as cement broken bricks, sand G.I. rods,Binding wire, all albour for working in height, curing lifting of materials etc..,complete incuding cement painting 2coats over a primary coat (One vigraham is accountable with one head ,4hands with weapons, ornamental costumes etc..as per prathima lakshana, vaaigraham height is measurable from the crown top to the bottom of foot only. If peetam is provided the rate with peetam may be adopted as detailed hereunder).

Sudhai size above 2' 6" up to 3' 6"

Sub total

Please Enable Macros to View BoQ information