Repairs and replacement to the Mahindra Bolero bearing registration No. JK01AC-0915 plying with the Deputy secretary to Govt. public works department Govt. of Jammu and Kashmir

Amount

Providing & Filling of the approved grade engine oil (06 Lits) 10W-40 along with Air, diesel & lube oil filters after replacement/flushing out of the existing engine oil & filters. The job includes all the tools & tackles along with consumables. required for the job.

Complete four wheel checking of the vehicle by way of removing of Tyres. Providing/Fitting of the front disc pads after dismantling of the existing ones. The job includes P/Fitting of the rear brake shoes & front/rear bearing oil seals. The job includes checking & topping of the brake oil, proper greasing of all assemblies/sub assemblies. The job involves refitting of the tyres back & then testing of the vehicle on variable speed conditions on road. The Job also includes arrangement of all tools/tackles required for the job.

Checking of the transmission system of the vehicle by way of checking the clutch assembly & the gear box. The job includes dismantling/removing of the existing clutch assembly including its worn out parts & Providing/Fitting of the new clutch kit (Clutch Plate & pressure plate) along with Assembly clutch slave cylinder . The job also includes checking of the gear box parts, transmission hose & transmisson oil & transmission RPM Sensor. The job also includes Providing/filling of the Transmission oil 75W-90 (2.5Lit)

Checking of the AC functionality of the vehicle by way of checking air filter, ducts, comressor & regulator filter. The job includes checking for the leakages & repairing the same by way of brazing etc. Checking of the refrigerant & topping of the adequate quantity of the refrigerant R134a along with the compressor oil. The job includes leak testing after repairs using nitrogen gas The job also includes testing of the vehicle after conducting the necessary repairs to the AC sytem for hot & cold options.

Repairs to the dents & scratches all over the body by way of denting & applying the scratch filler putty, automotive primer & PU (Polyurethane) & then the automotive paint of the desired shade. The job includes rubbing of the complete paint job. The job includes dismantling of the side door steps & removing the dents for improving the aesthetic look. The job also includes rubbing of complete paint job to give even finish.

Repairs to the suspension system of the vehicle by way of dismantling the front & rear shock absorbers, front/rear suspension strut assembly, shock absorber, bearing etc. The job includes P/Fitting of the front/rear shock absorber along with shock absorber mount & shock absorber spring seat. The job also includes P/F of shock absorber bearing, shock absorber boot & shock absorber bump stop. The job also includes P/F of the shock absorber spring seat, inner tie rod left/ right & stabilizer bush sets.

M/S DIAMOND AUTOMOBILES (BID ID -2218740)