Repair of residential buildings and supply of various materials

Dismantling brick work in cement mortar i/c stacking of materials as directed by E/I as per S.I No 692

Dismantling door or window including chaukhats with hold fats as per S.I No 703

Dismantling existing plaster including disposal of refuse as directed by Engineer in charge within a distance of 60n meters (200 feet)

Dismantling reinforced cement concrete as per S.I No 694

M-150 brick work in 1:6cement and sand of 1.25 fineness modulus in superstructure as per S.I No.309

S/F of 32 mm flush doors commercial quality as per S.i No .470(a)

Concrete with 4cm gauge brick ballast, sand of 1.25 F.M. and cement in proportion of 8:4:1 in foundation and under floors including supply of all materials labour and tools and plants etc required for proper completion for the work.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture

Mild steel or iron work in plain work as per S.I No.504.

Mild steel or iron work in heavy sizes incluing drilling, rivetting,welding and fixing complete of work as S.I. 503

S/F of masquito proof jali as per S.I.No.NS-2 P- 49

12mm thick plaster in 1:6 cement & sand as per S.I No 586.

S/F of 6mm china white glazed tiles as per S.I.No 628

Providing and Laying rectified glazed ceremic floor tiles 300x300 mm or more size (Thickness to specified by approved make in clours) of first quality confirming to IS 15622 of approved make in colours & shade laid on 20 mm thick cement mortar 1:4 (ICement 4 coarse sand ) including grouting the joints with whie cement and matching pigments for 1 sqm.as per S.I.No CPWD 11.39

25 mm thick 1:2:4 plain C.C floor with cement approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in 5:1 as specified over and removing any over lapping mortar at the joints of pannels if any and given them a uniform finish including supply of all materials labour and T&P etc required for completion of the work as per SOR No 601b.

Scraping old white/colour wash as S.I.No 708

Providing and applying white cement based putty of approved brand with average thickness 1mm over the plastered wall surface to prepare the surface even and smooth complete of work.

One primming coat & two coat of oil distemper on distemper surface work i/c supply of all materials, labour and T&P etc. required for proper comlection of the work as per S.I.No.649+650

Two coat of oil distemper on distemper surface work on previous old distempered surface i/c supply of all materials, labour and T&P etc. required for proper comlection of the work as per S.I.No.651x2

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (1st quality As as per NBO 18.57

Finishing wall with water proof cement paint Two coats as per S.I.No.662x2

Painting or varnshing iron work in small area or new wood work with 1 coat (up to 1 sqm) of ready mixed priming paint and one coat of approved superior quality ready mix pint as per SOR.No.641

Painting or varnshing iron work two coats as per S.I.No.642

C.P. Brass bib cock 15mm

C.P brass long body bib cock

C.P brass stop cock (concealed) 15mm

C.P brass angle valve 15mm

PVC pipe 100mm dia

Premium quality water storage tank

S.S. Sink Jali

C.P brass extension nipple 1.5x2"

S.S.mosquito proof jali

PVC pipe 75mm dia

PVC bend 100mm dia

PVC bend 75mm dia

PVC socket 100mm dia

PVC socket 75mm dia

PVC jointing solution tube

Brass Spindal for C.P. pillar Cock

Alluminium Sheet 26 gauge

CPVC pipe 15mm nominal dia

CPVC pipe 20mm nominal dia

CPVC pipe 25mm nominal dia

CPVC pipe 32mm nominal dia

Mirror of Superior make glass 60×45

Vitreous China Indian type W.C Pan of size 580mm

PVC flushing cistern 10 Ltr capacity with all internal fitting

PTMT 15mm Bib Cock

PTMT 15mm Bib Cock Long Body with flange

PTMT 15mm Stop Cock Long Body with flange

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes 53mm to 22.4mm to water bound macadam (G-3) specification including spreading in uniform loose thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone dust to fill-up the interstices of coarse aggregate, watering and compacting 7.50cm thickness to the required density grading 3 as per Technical Specification Clause 405. (Including all material and T&P etc. complete & Excluding cost of GST)

Please Enable Macros to View BoQ information