SPECIAL REPAIRS TO TYPE III QTR BLOCK NO P 22 AT CQA EE RESIDENTIAL COMPLEX, AUNDH CAMP UNDER GE MH AND RH KHADKI

Amount

Removing of old water proofing treatment and cleaning the surface of slab with wire brush, removing dust, foreign materials and removing the rubbish off the premises complete all as specified and as directed by Engineer - in - Charge.

M & L for PCC M-15 grade (Nominal Mix) using 12.5 mm graded stone aggregate on roof top for maintaining of slope coving, benching etc complete all as specified and as directed by Engineer - in - Charge.

M & L rendering 10 mm thick on concrete surfaces of roof in CM 1:3 mixed with WPC @ 3% by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement complete all as specified and as directed by Engineer - in - Charge. Note :- WPC shall be measured & paid separately under relevant item of this BOQ.

M & L for applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof (An overlap of 100mm & 150mm shall be provided on sides and ends respectively ) complete all as per manufacturers instructions.

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing and removing to store complete all as specified and as directed by Engineer - in - Charge.

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing and removing to store complete all as specified and as directed by Engineer - in - Charge.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Refixing old steel tubing and connection of 20 mm dia in new or old position walls, ceiling, floor etc with new fittings complete all as specified and as directed by Engineer - in - Charge.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Refixing old steel tubing and connection of 15 mm dia in new or old position walls, ceiling, floor etc with new fittings complete all as specified and as directed by Engineer - in - Charge.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs, gun metal globe or gate valves 20 mm dia ,with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer - in - Charge.

Dismantling water tank of any description or capacity 500 litres all as specified as directed.

Supply and fix 500 litters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and as directed by Engineer - in - Charge.

S&F ball brass valve 20 mm dia high pressure with polythene float and fly nut complete all as specified and as directed by Engineer - in - Charge.

Taking down chowkats and frame n.exc 1.5 Sqm including shutter without taking off shutters from frame complete all as specified and as directed by Engineer - in - Charge.

Taking down chowkats and frame exc 1.5 Sqm and n. exc 4 sqm including shutter without taking off shutters from frame and removing from site specified and directed by Engr-in-Charge

S&F powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved colour) aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer - in - Charge.

S&F powder coated (minimum thickness of powder coating shall not be less than 50 micron of approved colour) aluminium three track window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed by Engineer - in - Charge. Note : Glazing shall be measured and paid as supply only under relevant item of BOQ. Fixing rate is deemed to be included under limit rate quoted.

S&F powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved colour) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engineer - in - Charge.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Supply only 5.50mm thick Sheet glass, ordinary quality in square n exc 0.5 sqm in each pane

Supply only 5mm thick Sheet glass, obscured or frosted square in exc 0.5 sqm in each pane

S&F 105 X 60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.

S&F 125 X 60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.

S&F in repairs 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with only one face has decorative veneer; fixed with screws to timber frame work complete all as specified and as directed by Engr-in-Charge

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed by Engr-in-Charge.

S & F in repairs Second class hard-wood clean sawn timber fixed in scantlings complete all as specified and as directed by Engr-in-Charge

M & L for flush shutters 30mm thick solid core constructions with block board core , ply wood face panels commercial type on both side complete all as specified and as directed by Engineer - in - Charge.

S & F 30 mm thick 2nd class H.W glazed or skeleton shutter open rebated divided into square with plain chamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.24 (a) of SSR Part-I

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, complete all as specified and as directed by Engr-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, complete all as specified and as directed by Engr-in-Charge

S & F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm including fixing with wooden/steel batten complete all as specified and as directed by Engineer - in - Charge.

M & L for Aluminium anodised barrel tower bolts 150mm long complete all as specified and as directed by Engineer - in - Charge.

S&F butt hinges medium weight cold rolled mild steel 100 mm and fixed complete all as specified and as directed by Engineer - in - Charge.

S & F Aluminium alloy sliding door bolt 300 mm long, plate bolt not less than 12 mm dia with and incld mild steel min of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate fixed/welded to door shutter/frame complete all as specified and as directed by Engineer - in - Charge.

M & L for Aluminium handles pressed oval type for doors 150 mm long complete all as specified and as directed by Engineer - in - Charge.

Taking down cement plaster in any description incl racking out joints hacking for key and scrubbing down with water etc. complete all as specified and as directed by Engineer - in - Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises as directed

M&L for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even surface complete all as specified and as directed by Engineer - in - Charge.

M&L for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of ceiling in CM 1:4 with finished even surface complete all as specified and as directed by Engineer - in - Charge.

M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of stone masonry surface CM 1:4 and surface finished even and fair by mixing water proofing compound as per manufacturers instructions complete. Note :- WPC shall be measured & paid separately under relevant item of this BOQ.

Supply only Integral water proofing compound

M & L for providing and carry out water proofing treatment to toilets, sunken floors slabs, wet areas etc, after proper surface preparation, carry out cementations injection grouting at leakage points using cobex 100 plasticised expansive ground admixture, application of polymer modified vatta at slab and wall junction using nitobond SBR latex- screed modifier cum bonding agent and application of two coats of brush bond RFX - two- Part acrylic polymer modified cementations elastometic water proof and protective coating and ponding for 2 to 3 days etc, complete including all tools and tackles as per manufactures specification.

M & L for PCC M-5 grade (Nominal Mix) using 40mm graded stone aggregate as in filling, mass concrete, for sunken floor .

M&L Non Skid Joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles & laid over and including screed bed 15mm thick in CM 1:6 complete all as specified and as directed by Engineer - in - Charge.

M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and as directed by Engineer - in - Charge.

All as per item No. 47 but in skirting over 10 mm thick plastering as in backing coat in CM 1:4 complete all as specified and as directed by Engineer - in - Charge.

M&L coloured Glazed ceramic tiles in vertical surface of size 300mmx450mm x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over and including backing coat 10mm thick in CM 1:4 complete all as specified and as directed by Engr-in-Charge

M&L 20-25 mm thick Machine cut Machine polished kota stone slab in flooring jointed in neat cement slurry mixed with pigment to match the shade and laid over and including sceed bed 15 mm thick screed bed in CM 1:3 complete all as specified and as directed by Engr-in-Charge

Ditto all as per item No 50 above but in riser, step, skirting, dados and pillar over 10 mm thick plastering in cement mortar 1:3 complete all as specified and as directed by Engineer - in - Charge. Note:- Kota stone slab in step shall be in single piece.

M&L 20 mm thick Granite slab machine cut bedded and jointed with grey cement and pointed with white cement and adhesive of pigment to match the shade incl cutting and polishing and laid over and including screed bed 10mm thick in CM 1:4 complete all as specified and as directed by Engineer - in - Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed .

S & F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs washers and wastes incl bedding in CM to drawf wall including fitting cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs steel plate rack of 90cm x 75cm x 20cm complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs 20mm dia CP curtain rod complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs bracket of fancy type curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges

S & F in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and as directed by Engineer - in - Charge.

S & F in repairs bib taps CP Brass with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm dia complete all as specified and as directed by Engineer - in - Charge.

S & F in repairs brass CP shower rose 125mm size with swivel joint complete all as specified and as directed by Engineer - in - Charge.

M & L for 75 mm thick PCC M-10 grade (Nominal Mix) using 20mm graded stone aggregate as in Plinth, Path, floor with fair finish surface without using extra cement complete all as specified and as directed by Engineer - in - Charge.

S & F in repairs vitreous china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and as directed by Engineer - in - Charge.

S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm dia complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs PVC waste outlet pipe for 32/40mm kitchen sink complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and as directed by Engineer - in - Charge.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and as directed by Engineer - in - Charge.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed.

S & F in repairs water closet (Squatt Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc and making good to floor. complete all as specified and as directed by Engineer - in - Charge.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe,brackets complete all as specified and as directed by Engineer - in - Charge.

M&L PCC M-15 grade (Nominal Mix) using 12.50mm graded stone aggregate as in coping hold fast block bed block filling pressed steel door frame etc complete all as specified and as directed by Engineer - in - Charge.

M&L painting to wooden surfaces of any description over 10 cm width or girth including preparation of new or untreated surface and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engineer - in - Charge.

M & L for preparation of newly plastered surfaces of wall and finishing surface of wall with Acrylic Smooth exterior paint of required shadeand applying Two coat @ 1.67 litre/10 sqm over and including priming coat of exterior primer @ 2.20 kg/10 sqm including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over wall care putty not less than 1mm thick finished even and smooth complete all as specified and as directed by Engineer - in - Charge.

M&L Complete removal of existing treatment & applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over wall care putty not less than 1mm thick finished even and smooth complete all as specified and as directed by Engineer - in - Charge.

M & L for preparation of new plastered surfaces on ceiling and applying three coats of white wash over wall care putty not less than 1mm thick finished even and smooth complete all as specified and as directed by Engineer - in - Charge.

M&L for Complete removal of existing treatment on ceiling & applying three coats of white wash over wall care putty not less than 1mm thick finished even and smooth complete all as specified and as directed by Engineer - in - Charge.

Demolition of stone/brick /PCC block masonry built in cement mortar or cement lime mortar complete all as specified and as directed by Engineer - in - Charge.

M & L for Pre-cast cement concrete (design Mix) C-5 block masonry , exc. 10 cm in width buit in CM 1:6 , complete all as specifed and as directed

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories)

S&F 110mm dia PVC (SWR) pipes Type B single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer - in - Charge.

Ditto all as per item No 82 above but refixing only complete all as specified and as directed by Engineer - in - Charge.

S&F in repairs 75mm dia PVC (SWR) pipes Type B single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer - in - Charge.

Ditto all as per item No 84 above but refixing only complete all as specified and as directed by Engineer - in - Charge.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer - in - Charge.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer - in - Charge.

Cutting holes n.exc 150 sq cm in brick wall built in cement mortar or cement lime mortar & Making good complete all as specified and as directed by Engineer - in - Charge.

M & L for Grating doom 100mm dia of PTMT (Minimum weight 25gms) with hole /without hole complete all as specified and as directed by Engineer - in - Charge.

M & L for PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer - in - Charge.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer - in - Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through non metallic rigid PVC conduit of suitable size and accessories in surface of walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for complete all as specified and directed.

One fan/light /bell point controlled by one, one way switch/bell push

One 3 pin 5 Amps socket on same board control with other switches on same board

One 3 pin 5 Amps socket on same board control with other switches on indepent board

One light point controlled by two way switch complete all as specified and directed.

All as per Item No 93.00. but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for Power Socket on independent board on the existing Concealed conduit complete all as specified and directed.

All as per Item No 93.00 but with 4 Sqmm PVC insulated multistranded copper conductor with 4 sqmm cable as earth continuity conductor for Power Socket/AC/Geysers on independent board on the existing Concealed conduit complete all as specified and directed.

Supply and fix modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix modular switch 2 way 6A 1 module complete all as specified and directed.

Supply and fix modular bell push 6A 1 module complete all as specified and directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular socket 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular switch 1way 16A 1 module complete all as specified and directed.

Supply and fix Modular fan regulator

Supply and fix electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply & fix in repairs LED fitting for Bldg security, 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including connecting with 1.5 sq mm copper conductor 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 32 mm medium grade GI pipe of 1 mtr length with necessary bending complete all as specified and directed .

Supply and fixing in repairs wall mounted LED tube lights fitting extruded aluminium housing high quality indoor batten LED tube 22 w colour tempperature 6500K (4' long) lumen 2000-3000, PF> .95, thd LESS 10% DIFFUSED connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Note :- The rates are inclusive of cost of square box-02 nos including suitable size of clamps and screws etc.

S & F in repairs wall/ceiling mounted LED tube light fitting 4' long with opal diffuser & having aluminium body , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Note :- The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc.

Supply and fixing in repairs LED Light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, Aluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in repairs wall mounted high quality indoor wall bracket light cylindrical/oval shape aesthetically designed fitting in wooden housing , glass and B22/E27 holder complete including inverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10 watts including necessary electric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed.

S & F in repairs sub main wiring in PVC conduit with two runs of 6 sqmm and one runs of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid conduit heavy grade ISI marked (IS 9537 Part III) including accessories such as bends, supports etc all as specified and directed. Note: Two runs of 6 sqmm copper conductor cable and one runs of 6 sqmm copper conductor cable as earth wire along with PVC conduit shall be measured as one unit length.

S & F MCB DB SPN 12 way of any size and capacity double door type horizontal with 200A bus bar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.

S & F MCB SP of capacity 5A - 32A "B' curve all as specified and directed.

S&F MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and directed.

Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and including 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Supply and fix in repairs electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as directed. Note:-Old electric water heater shall be deposited in MES store.

Supply & fixing in repairs exhaust fan made of sturdy Engineering plastic complete with louvers shutter, volt 230 V, 50 Hz, RPM 1200, copper winding of sweep 250 mm including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal , fixing the fan with suitable size of nut, bolt washer, complete all as specified and directed. (for toilet) Note :- (i) Exhaust fan shall be fixed in existing Aluminium window (ii) Old exhaust fan shall be deposited in MES store.

Supply & fixing in repairs exhaust fan 300 mm sweep, steel body, single phase, AC 230 Volt heavy duty, with blade frame and louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal , fixing the fan with suitable size of nut, bolt washer, complete all as specified and directed (for Kitchen). Note :- (i) Exhaust fan shall be fixed in existing Aluminium window (ii) Old exhaust fan shall be deposited in MES store.

Supply and fixing in repars ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Note:-Old Ceiling Fans shall be deposited in MES store.

supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amp DP MCB all as specified and directed ( For Geyser)

Taking down the existing serviceable kwh meter from site without any damage cleaning it properly and refixing the same in the new panel as directed by Engr-in-charge of the each block after completion of work all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and n.exc 1.5 m depth for foundation, etc., Shaft wells, Manholes, laying pipes etc and getting out in soft / loose soil all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and n.exc 1.5 m depth for foundation, etc. Shaft wells, Manholes, laying pipes etc and getting out in Hard/dense soil all as specified and directed.

Returning filling in including spreading leveling watering well ramming in layers not exceeding 25cm thick with soil obtained from excavation all as directed.

Removing excavated surplus soil to a distance n.exc 50m 00m and depositing where directed at a level exceeding 1.5m above the starting point all as directed.

M&L for crushed stone grid for cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning.

Supply and laying un-reinforced precast concrete cable cover LV, Type I, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed.

Material and labour for fixing / laying through pipe/ laid in trenches/ fixed on wall XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sqmm 3.5 core including end terminations and glands all as specified and directed by Engr-in-charge.

M/S J J ENTERPRISES (BID ID -3369240)

ShreHari Civil Enginneering and Contractors (BID ID -3360824)

VP DEVELOPERS AND CONTRACTOR (BID ID -3370313)

M/S JAYCONSTRUCTION CO (BID ID -3370184)

MAHESH DADAJI BACHHAV (BID ID -3370146)

Bidder Name

V.R.PRAJAPATI AND CO.

M/S JAYCONSTRUCTION CO

MAHESH DADAJI BACHHAV

M/S J J ENTERPRISES

VP DEVELOPERS AND CONTRACTOR

ShreHari Civil Enginneering and Contractors