Estimate for repair and renovation of Kothi no. 6 in Canal Colony, Jalandhar.

Amount

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade (inner portion).

Finishing walls with exterior decorative cement based such as snowcem, robbiacem etc. two or more coats to give an even shade (Outside Kothi).

scraping © cement plaster

12.5 mm thick cement plaster 1:4

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

12.5 mm thick cement plaster 1:3 on floors

cement rendering on plaster 1 mm thick

Factory manufactured flush door fixed in position iron hinges , etc ( excluding the cost of any fittings other than specified above but including labour for fixing the same in position ( a ) commercial with elm or gurjan facing on both / sides laminated core and lipped edges:- (iv) 35 mm thick

Wire Gauge Imported teak wood door shutter without springs housed in chowkats. (30 mm thick)

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc.

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b ) Glazing area above 0.09 sqm (iii) 5 mm thick plate glass (INDIAN)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Painting two or more coats with synthetic enamel paint in all shades on old wood work or metallic or plastered, concrete surface to give an even shade including rubbing down old paint.

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. (a) G.I. tank nipple 15 mm i/d

providing and fixing in position Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Painting new letters and figures of black synthetic enamel paint to an even shade.

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt. ( Also not to used over footoaths).

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.C.P. brass Bib cock self closing.

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xi) 6/10amp. One Way Modular Switch (One Module)

(vii) Step type Fan Regulator Flush Piano type (Switch size)

(xxvii) Bakelite Batten Holder (Large size)

(xiv) 6/10amp. One Way Modular Bell Push (One Module)

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (i) Overall size 6 sq.mm (2Core) Un-armoured (On-Surface)

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position.

Providing and fixing jet spray with 2'-6" long PVC pipe with C.P. Brass nut

Providing and fixing plastic hygenic seat cover with lid complete.Plastic Seat Cover Premium star white/pastel/special colour.

Providing and fixing PVC accessory fittings in Chinaware flushing cistern 10 Litres capacity complete.

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 15mm stop cock Male and female end.

Providing and fixing in position C.P. brass overhead shower 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball valves

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. 20mm i/d G.I. Union

Providing and fixing Aluminium cup boards in kitchen and rooms including shelves in all respect

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

SYSKA Led Bulb

Orient electric LED batten 20 w

Orient electric ceiling fan

Orient electric excaust fan

Any Other Item

THE CHOTIYAN CO-OP L AND C SOCIETY LTD