Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹33.8 L+₹1.3 L (3.93%)Rejected-Finance HOUSE NO 99 3RD FLOOR SK JAIN BUILDING KALIBARI ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹35.4 L+₹2.9 L (8.79%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 |
| Sl No | Description | Qty | Unit | VAISHNO ASSOCIATES L2 | M/S ORIENTAL MOTORS COMPANY L3 | M/S MUGHATOLI AYE L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in post holes (or similer holes) each n.exc 0.5 Cum getting out, returning filling and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good the disturbed surface in hard and dense soil complete all as specified and as directed. | 351 | Each | 105 ₹36,855 | 110 ₹38,610 | 100 ₹35,100 Lowest |
| 2.00 | Material and Labour for plain cement concrete type C2 1:3:6 (using 40mm graded aggregate) as for in foundations, filling and mass concrete post holes for securing angle vertical posts complete all as specified and as directed. | 42.73 | Cum | 7,050 ₹3,01,246.5 | 7,020 ₹2,99,964.6 | 7,000 ₹2,99,110 Lowest |
| 3.00 | Supply and fixing Angle Iron, Flat Iron, Hand rails, half round or other steel section or posts and struts in fencing drilled and countersunk for balusters running bars, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-410 Gde E-310 complete all as specified and as directed. | 9,301.05 | KG | 155 ₹14,41,662.75 | 158 ₹14,69,565.9 | 150 ₹13,95,157.5 Lowest |
| 4.00 | Supply and fixing Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. | 2,455.66 | Kg | 110 ₹2,70,122.6 | 135 ₹3,31,514.1 | 100 ₹2,45,566 Lowest |
| 5.00 | Supply and fixing galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (each line wire to be measured). | 50 | 100 RM | 2,220 ₹1,11,000 | 2,215 ₹1,10,750 | 2,200 ₹1,10,000 Lowest |
| 6.00 | Fixing only chain link fencing 4mm dia galvanised steel wire 100 x 100 mm mesh, made up into mattresses or cages, lapped including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed. | 2,090 | Sqm | 45 ₹94,050 | 48 ₹1,00,320 | 40 ₹83,600 Lowest |
| 7.00 | Supply only chain link MS galvanised steel wire fencing 4mm dia and 100 x 100mm mesh , made up into mattresses or cages,lapped wired complete all as specified and as directed. | 4,596.9 | KG | 155 ₹7,12,519.5 | 150 ₹6,89,535 Lowest | 150 ₹6,89,535 Lowest |
| 8.00 | Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc.10cm long but n.exc.15cm long, diameter of neck 11 to 15 mm complete all as specified and as directed. | 276.19 | KG | 175 ₹48,333.25 | 173 ₹47,780.87 | 170 ₹46,952.3 Lowest |
| 9.00 | Material and Labour Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed. | 440 | Sqm | 150 ₹66,000 | 152 ₹66,880 | 140 ₹61,600 Lowest |
| 10.00 | Material and Labour Preparation of new steel surfaces of any description, n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed. | 398 | Per 10 Rm | 60 ₹23,880 | 54 ₹21,492 | 50 ₹19,900 Lowest |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
2 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Amit Chaubey
HQ 137 Wks Engr PIN 914137 c/o 99 APO
PROVN OF CHAIN LINK FENCING NEAR BLDG NO T-6 AND FROM BLDG NO T-27 TO T-22/23 AND PROVN OF CHAIN LINK FENCING FROM GATE NO 02 TO FOOTBALL GROUND WITH A GATE AT CHAKABAMA MIL STN
2025_MES_718794_1
8050/E8
Open Tender
Civil Works
Item Rate
180 days
CHAKABAMA
as per tender documents
6 documents required · 6 mandatory
₹500
AGE (I) Zakhama
₹62,000
Yes
1 Sept 2025
5 Jul 2025
9 Aug 2025
5 Jul 2025
2 Aug 2025
19 Jul 2025
Amount
Excavation in post holes (or similer holes) each n.exc 0.5 Cum getting out, returning filling and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good the disturbed surface in hard and dense soil complete all as specified and as directed.
Material and Labour for plain cement concrete type C2 1:3:6 (using 40mm graded aggregate) as for in foundations, filling and mass concrete post holes for securing angle vertical posts complete all as specified and as directed.
Supply and fixing Angle Iron, Flat Iron, Hand rails, half round or other steel section or posts and struts in fencing drilled and countersunk for balusters running bars, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-410 Gde E-310 complete all as specified and as directed.
Supply and fixing Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Supply and fixing galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (each line wire to be measured).
Fixing only chain link fencing 4mm dia galvanised steel wire 100 x 100 mm mesh, made up into mattresses or cages, lapped including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.
Supply only chain link MS galvanised steel wire fencing 4mm dia and 100 x 100mm mesh , made up into mattresses or cages,lapped wired complete all as specified and as directed.
Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc.10cm long but n.exc.15cm long, diameter of neck 11 to 15 mm complete all as specified and as directed.
Material and Labour Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.
Material and Labour Preparation of new steel surfaces of any description, n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.
Excavation in trenches not exceeding1.5metre wide and not exceeding1.5 metre in depth and not exc10Sqm on plan in any type of soil and getting out in hard/ dense soil Complete all as specified and as directed.
Material and Labour for Cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and as directed.
Material and labour for reinforcement cement concrete (Nominal mix) Type B1 (1:1.5:3) using 20mm graded aggregate as in footing , foundation beams, plinth beams, based for column Complete all as specified and as directed.
Material and labour for reinforcement cement concrete (Nominal mix) Type B1 (1:1.5:3) using 20mm graded aggregate as in column, pillars, piers, posts and struts Complete all as specified and as directed.
Supply and fixing framed work as in door or gate of angel,mild steel plate or other section with gusset plates, rails, braces, etc complete of Gde Fe -410 W or E-250, drilling ,welding etc for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding Complete all as specified and as directed.
Supply and fixing mild steel work conforming to Fe-310-0 or Fe-410-0 in hold fasts of flat of flat iron , hooks, pintle hinges, cleats hand made sliding bolt and smilar items complete all as specified and as directed.
Material and Labour TMT bars (Fe 500),10mm dia and over in reinforcement cut to length,bent to shape required incl bending spirally cranking,hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips, all as specified and as directed.
_Ditto -all as per item No 17 here -in -before but 5mm dia and over upto and including 10mm dia in stirrups space and binders all as specified and as directed.
Material and Labour form work to flat sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of plinth beams complete all as specified and as directed.
Material and Labour form work sides of pillars, post struts pier columns square,rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.
Material and Labour 20mm thick Granite of any type work (table rubbed and polished) for wall lining (veneering to wall) in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed.
Supply and fixing 25 mm bore GI tubing medium grade galvanised with all fitting and fixed complete to wall or laid in floor complete all as specified and as directed.
Removal of excavated material (soil) to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
Returing, filling in (soil) including spreading, levelling,watering and well ramming in layer not exceeding 25cm thick in any type of soil complete all as specified and as directed.
VAISHNO ASSOCIATES (BID ID -3378554)
M/S ORIENTAL MOTORS COMPANY (BID ID -3378609)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .