SPECIAL REPAIR TO TOILET BLOCKS BLDG NO P-486,P-489, T-570C OF 2 FOD AT BB CANTT SRINAGAR.

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, as per architectural drawings, complete all as specified and directed.

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, fixed type/sliding type/side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement, frosted glass of 5mm thick etc., complete all as specified and directed.

S & F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed.

S & F 150 mm size extruded aluminium handles fabricated type, anodised, complete all as specified and directed.

S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections, complete all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 and including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc., complete all as specified and directed.