RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Hopper Or Tipper ( 3 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Type of TIPPER Garbage Tipper Garbage Tipper Type of TIPPER if other tipper
Requiredplease declare type of Tipper
Required- * Main Engine Capacity 702 * 1/6 (cc) Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel Vehicle Emission Complaince bs iv BS IV Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 2.79 Any applicable numeric value Speed
RequiredMax (Km/Hr) 60 * Max Engine Power BHP (BHP@rpm) 16 16 Max Engine Torque (N-M@rpm) 39 39 Main Engine Aspiration Natural Aspiration Natural Aspiration No. of Cylinder in Main Engine (Nos) 2 2 Fuel Tank Capacity (Ltrs) 30 30.0 Gradeability of Vehicle with load( %) 16.38 * Gradeability of Vehicle without load ( %) 18 * Ground Clearance (mm) 160 Any applicable numeric value Wheel Base (mm) 2100 * Kerb Weight (Kg) 720 720.0 Gross Vehicle Weight (Kg) 1700 1700.0 No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and - * 2/6 Suspension System Type of BIS MARKED Vehicle Tyre Radial * Chassis Transmission System Manual Manual Number of Speed Forward Gears 4 * Type of Steering Manual Manual Turning Radius
RequiredMin (mm) 4300 Any applicable numeric value Speed Governers No * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 85 45 - 9999999 Tipper Container cap acity/Volume(cubic metres) 1.8 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 * Width of Chassis (mm) 1500 * Height of Chassis (mm) 1845 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 304.8 Any applicable numeric value Tipper body Pivot length (mm) 0 * 3/6 Tipper body Length (mm) 2240 * Tipper Body Height (mm) 735 * Overall Height of Tipper from Ground (mm) 1518 * Body Plate Thickness (mm) 1.6 1.5 - 9999999 Main Frame Thickness (mm) 3 Any applicable numeric value Pneumatic System No * Hydarulic System Yes * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Main Engine * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation No * If Yes Auxiliary Diesel Power (HP@rpm) 0 Any applicable numeric value Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel Thickness of sheet from tipper Collector Container Made (mm) 1.6 Any applicable numeric value Dumping Height (mm) 1012 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel Yes * Fuel Gauge Indicator in Control Panel Yes * Engine Cooling Liquid Temperature Indicator in Control Panel Yes * Operating Hour Meter No * 4/6 Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight No * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.