REPAIR/ MAINT TO CERTAIN INTERNAL ROADS OF VARIOUS UNITS AREA-II UNDER AGE BR-II AT GE KAMPTEE

Amount

Repair to pot holes any depth, n. exc. 1 sqm each including sweeping with mechanical equipment and making the surface free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. by using pressure air, cutting around edges to atleast 25 mm in depth making good by applying tack coat at 5 kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings of 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc. 30 mm using paving bitumen, complete all as specified and as directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with mechanical equipment, to remove all loose dirt etc. complete and applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen grade VG-10 on blacktop surface using mechanical sprayer and providing premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient , using 8 to 10 tonne power roller complete all as specified ans directed. Note: The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.

Material and Labour for preparing Unsurfaced WBM by brushing with wire brushes for removing caked mud etc,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 Sqm using paving bitumen grade VG-10, complete all as specified and directed.

Material and labour for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed. Note: The work shall be executed by using hot mix plant & mechanical paver.

Material and labour for Preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 800.4 of MORTH specification including spraying of glass beads etc. all as per manufacture instructions and as specified and directed.

Surface dressing not exceeding 15cm deep including getting out in soft/loose soil for road side berms to required gradient, complete all as specified and as directed.

Material & Labour for moorum/ red-bajri as in road berms 150 mm spread thickness for light wearing surface spread, rolled, consolidated to gradient and camber required , complete all as specified and directed.

Supply and fixing delineators made out of MS pipe 75 mm dia with powder coating/ stove enamel paint, 120 cm long with 03 Nos 100 mm wide prismatic reflective sheeting colour coating as approved & provided with reinforced mesh and providing cement concrete as in foundation filling complete all as specified and directed and as per manufacture's instructions.

Supply and fixing in repairs solar road stud of size 125 mm X 125 mm X 20 mm aluminium alloy & polycarbonate stud (Red/ yellow LEDs) 3 x 3 LEDs with shank in tough aluminium diecast body with stem complete all as per MORTH / IRC specification and manufactures instructions, complete all as specified and directed.

Supply and fixing in repairs ABS road colour cat eyes having dual direction (both sides) of size 100mm x 100mm x 18mm having body ABS filled with Epoxy, Quartz & sand with PMMA lens with load capacity greater than 50 kg with visibility 800 m etc. complete all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.600.00 /- ]

M/s Rahul Traders

AK CONSTRUCTION

Bidder Name

M/s Rahul Traders

AK CONSTRUCTION

M/s KAMAL R AGRAWAL