Construction of R.W. Sub-Division office Building Buguda for the year 2025-26.

Earth work in excavation of foundation in hard or gravelly soil with initial lead and lifts including dressing and leveling the bed of the foundation to the required width and required depth including shoring shuttering,propping bullah,pilling,dewatering from foundation supplying and working of pumps including hire & running charges of pumps & all machinaries required for the work & stacking the excavated materials away from the working areas with cess complete as per specification & direction of the Engineer-in-Charge.

Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty additional charges, DMF 10% & EMF 5% over royalty & taxes of all materials & cost of all labour & T&P required for the work complete (measurement will be taken for compacted section) as per direction of Engineer-in-Charge.

Providing Cement concrete (1:3:6) in foundation upto a required depth below ground level and upto a required height above ground level/bed level using 4cm size hard granite metal of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers not exceeding 15cm thick compacting with proper packing to proper slope and level including watering, curing and cost, conveyance, Cess royality, additional charges, DMF 10% and EMF 5% over royalty taxes of all materials etc. with all labour and T and P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer in charge

Fly Ash brick Masonary in cement morta (1:6) in foundation/superstructure using fly ash brick of 23cmx11cmx8cm size bricks having crushing strength in between 75 kg to 100kg per sq .cm with diamantion tolerance + 8% including splays cutting circular moulding chamfering & corbelling watering and curing for 7days after immersing the bricks in water for six hours before use etc.complete including cost, conveyance, royalties DMF (10% over Royality),EMF(5% over Royality)& Addl.charges & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification direction of the E.I.C. i. Foundtion

ii. Ground Floor

iii. Head Room

RCC of design mix of M-250 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, DMF (10% over Royality),EMF(5% over Royality)& Addl.charges Cess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) i. Column Base

x. Chajja (Head Floor)

ii. Grade Beam

iii. Lintel (Ground Floor)

iV. Lintel (Head Room)

v. Column (Ground Floor)

vi. Column (Head Floor)

vii.Beam (Ground Floor)

viii.Beam (Head Room)

ix. Chajja (Ground Floor)

xi. Roof Slab (Ground Floor)

xii. Roof Slab (Head room)

xiii. Staircase

Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge. i. Ground Floor

ii. Head Room

20mm thick cement plaster over brick work in cement mortar (1:6) including watering, curing, racking out joints rounding of corners T&P & Cess cess required for the work with all taxes and royalties etc, complete in all respect in all floors as per direction of Engineer-in-charge.

16mm (5/8") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities royalties DMF (10% over Royality),EMF(5% over Royality)& Addl.charges ,etc completed in all respect in all floors as per direction of the Engineer-in-Charge. i. Ground Floor

ii. Head Room

12mm (1/2) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T and P required for the work with all taxes and royalties DMF (10% over Royality), EMF(5% over Royality) and Addl.charges , etc. complete in all respect in all floors as per direction of the Engineer in charge. i. Ground Floor

ii. Head Room

6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work with taxes and royality etc complete in all respects in all floors as per direction of Engineer-in-Charge. i. Ground Floor

ii. Head Room

Supplying, fitting & fixing of Granite Tiles of minimum above 0.40 sqm (25mm thick) of approved make in floors, trade & Raise of stair case laid on 20 mm thick cement mortar (1:4) and filling joints with slurry including cost, conveyance, royalties, Additional charges, DMF @ 10% & EMF @ 5% over the royality taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. i. Ground Floor

Providing and fixing Chequred tiles in floors, treads of on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance,& labour, DMF (10% over Royality),EMF(5% over Royality)& Addl.charges T&P and Cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. i. Ground Floor

Supplying,Providing, fitting and fixing of Granite Dado in floors of size (600 x 600mm) of approved make confirming to IS:13755 with application of polymer modified quick set cement based water resistant adhesive confirming IS:15477 of 3mm thick bed and filling joints with white cement of approved quality including cost, conveyance, royalties,DMF (10% over Royality),EMF(5% over Royality)& Addl.charges ,taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge.

Supplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron work and coal taring 2 coats to wall side faces of choukaths including cost of coaltar, cutting grooves and mending to sizes where necessary with cost and conveyance royalities and taxes of all materials and labour, CESS with T&P required for the work etc. complete in all respect as per direction of Engineer-In-Charge.

Providing andfixingISI marked 35mm thik flush door shutters conforming to IS : 2202 (Prt I) decorartivetype, coreofblock board construction with frame of1st class hard wood and well matched teak three ply veneering with vertical grains or cross brands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixture etc. complete.

Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures as per direction of the Engineer-in-charge.

Supply, fitting and fixing of of 5.5 mm thick hexagonal Aluminium jally in windows as single grrove, double grrove and tapered clip as horizontal and vertical members for fixing of aluminium jally and jointing angle confirming to standard section etc. complete as per direction of the Engineer-in-charge.

M.S. Panelled Door single leaved shutter with M.S. Frame. Overall size including frame 1830mm Height x 910mm Width made out of the following materials conforming to relevant ISS Frame:- 30x30x5mm M.S. Angle Shutter style:- Top & Bottom rail 25x25x3mm M.S. Angle. Door panel :- 1.0mm C.R. Sheet. Panel stiffener covering width of leaf :- 19x5mm M.S. Flat 3 nos. Hinges size:- 100mm - 3 nos. bought out as per ISS. Hold fast:- 30x30x5mm M.S. angle 150 mm length bifurcated at the tip 3 nos. on each side Handle:- 19x5mm M.S. Flat fabricated - 2 nos. Aldrop:- 2 nos. bought out as per ISS. Tower bolt : 2 nos. bought out as per ISS as per direction of the Engineer-in-charge. Approximate weight:- 36.5 kg.

M.S. Window Grill, Grill gate made out of M.S. Flat conforming to IS: 2062/2006, painted with Red oxide primer, as per the design approved by the purchaser as per direction of the Engineer-in-charge.

M.S. Door made out of M.S. Flat conforming to IS: 2062/2006, painted with Red oxide primer, as per the design approved by the purchaser as per direction of the Engineer-in-charge.

Labour for fitting & fixing M.S. Grills for Gate including cost of screws complete as per direction of the Engineer-in-charge.

Labour for fitting & fixing M.S. Window Grills iincluding cost of screws complete as per direction of the Engineer-in-charge.

Labour for fitting & fixing Doors iincluding cost of screws complete as per direction of the Engineer-in-charge.

Painting 2 coat with any approved synthetic enamel paint over a coat of primer with brush to wood/iron work including cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge i. Ground Floor

ii. Head Room

Priming one coat with any approved primer over iron work including cost of primer with sand papering, polishing the surface in all respect with cost, conveyance and taxes of all materials and labour with T&P and CESS required for the work etc. complete in all respect as per direction of Engineer-in-Charge. i. Ground Floor

ii. Head Room

Distempering two coats over one coat of primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffloding, staging charges with cost, conveyance taxes of all materials cost of all labour T&P etc complete as per the direction of Engineer-in-Charge. i. Ground Floor

ii. Head Room

Finishing wall surface with two coats of approved quality of weather coat of approved shade over a coat of primer including cost,conveyance, royalities, taxes, cess of all materials, labour, T&P etc.Complete as per direction of Engineer-in-Charge. i. Ground Floor

ii. Head Room

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P, Cess etc. required for the complete as per specification and direction of E.I.C.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm and downgraded hard granite crusher broken chips on new work after chipping and chiseling the same and cleaning surface by wire brushing laid to proper slope finsihed smooth to receive tarfelt tratment watering and curing including cost and conveyance of all materials and labour with T&P and cess required for the work with all taxes and royalties etc, complete in all respect in all floors as per direction of Engineer-in-charge. i. Ground Floor

Providing, laying and fixing of factory made chamfered "Interlocking Concrete Paver Blocks" of M-40 grade & 80mm thick of approved shades confirmed to IS:15658-2006 specification over compacted sand bed course of 40mm laid over the properly graded and finished WBM using sand of gradation confirming to Clause-4.4 & 6.5.1 of IRC:SP-63-2004 with uniform moisture content of 6 to 8 per cent (the sand should not be too wet nor too dry) and spread with the help of screed boares and compacted by Plate Vibrator weighing 0.60tonne or more to acheive a compacted thickness of 40mm & local correction, if any required is to be done either by adding or removing the sand followed by further levelling and compacting and filling the gaps between paver blocks (about 3 to 4mm) with dry sand by brooming (the gradation of the filling dry sand should be as per clauses-6.5.2 of IRC:SP:63-2004) including cost, conveyance, royality, additional charges, DMF 10% & EMF 5% over royalty Cess, taxes & technical specification Clause 1501 and as per direction of Engineer-in-Charge.

EI WORKS Wiring Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A

-do- Group B

-do- Group C

Recessed wiring to Fan Point in... -do- Group B

Recessed wiring to Call Bell Point in... -do- Group B

Recessed wiring to Exhaust Fan Point in do Group C

S/F of Angle holder replacing Ceilling Rose (1.29-1.28)

Switch Boards S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

Circuit Breakers & BDB S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 8 way Double door (2.3.6)

Main switches Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

Earthing Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

Fittings S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC)

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

Fixing /I.T.C. of stepped type Modular regulator (1.25a)

S/F of 400mm Wall fan with all accessories and connections (Make-Usha-Maxx Air Ultra/Polycab-Arey HS/Cropmton-WM Hiflowave/ Havells-Accelero HS/ Anchor-Altrix HS- OWH/ Orient-Wall43/ Great White-WYNO WF)

Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 )

S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 9w Watt LED Bulb

S/F of 18W LeD Squre (12"×12") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic)

S/F of 900VA/12V Invertor machine with Trolly(Make- Microtek(Super power new 1100)/V-Guard(SMART 1100)/Luminous(ZELIO SMART 1100) and 180Ah tall tubular BatteryMake-Luminous and 16A Delux plug Top with Luminous single Trolley for Invertor Battery

S/F of 1.5T ,5Star,Inverter model, Split A.C Machine (Make- Hitachi(V518PCBISH1)/Blue star(V518PCBISH1C)/Carrier(CAI19CE5R35F0)/Daikin/LG/Mitsubishi/O-General)

S/F of Stabilizer (110-300V) 4KVA with 16A Delux plug Top(Make- V-Guard/Microtek)

Cables S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire

Other items Service Charges

PH WORKS ST Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr, a

From 1.5 mtr to 3.0 mtr depth

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In Foundation and Plinth in C:M (1:4) a.

In Foundation and Plinth in C:M (1:6)

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 12 mm thick C.P in C:M (1:4),

Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C

Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Factory made FRP/ALUMINIUM(alternately called GRP) door frame of size 75mmx100mm fabricated using . The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. M.S flat hold fast shall be provided with the frame. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C.

Factory made single leaf rigid FRP/ALUMINIUM(alternately called GRP) sandwich composite door shutter of 32mm thick. The thickness of the skins shall not be less than 1.50mm. Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites .The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter 2 x (0.72m x 1.95m)

Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor

Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.

Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC. 250mm thick wall

375mm thick wall

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.

Supplying all materials, labour T and P and fixing Wash Down Water Closet (Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification and direction of E.I.C. E.W.C. with S trap plain (Neycer / Parry ware / Cerra)

Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra)

Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC. 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) 110mm dia UPVC SWR Pipe

75mm dia U-PVC SWR Pipe

110mm dia U-PVC S. Trap

110mm dia U-PVC P. Trap

110mm U-PVC S/J with Door

110mm U-PVC door bend

110mm dia U-PVC Plain bend

110mm U-PVC Plain Tee

110mm U-PVC Cowl

125mm dia CP Grating

75mm dia U-PVC Plain Tee

75mm U-PVC Door Bend

75mm U-PVC Plain Bend

Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra )

Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C. Porcelain Pedestal

Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality

Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x450) heavy Stainless steel with Ambar make .

CP Towel ring heavy Stainless steel with mousoumi make .

Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality

Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar) (Shower+Arm)

Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality

Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra )

Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap

Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90m dia x 2.00m deep soak way pit

Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C 910m dia x 910mm x 910mm

Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with allround encasing

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 20 mm dia C-PVC Pipe( Internal)

25mm dia C-PVC Pipe (external)

Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings ( Jaquar make ) of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia cp bib cock S.B.

25mm dia Brass Ball Valve

15mm dia cp bib cock L.B.

15mm dia CP Two way bib Cock

15mm dia CP pillar cock

15mm dia cp concealed stop cock

15mm dia cp angle stop cock

Health Fuccet

15mm dia CP flange

15mm dia CP Extension piece

Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 2000 lit sintex tank (G Floor)

Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC. 2000 ltr capacity tank G Floor

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. 1x50x0.45x0.45m=10.125

Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C. 32mm dia HDPE pipes

Please Enable Macros to View BoQ information