PROVN OF WORK SERVICES FOR RENOVATION OF KITCHEN IN NC(E)s BLOCK AND MES QTRs(Ph-II) and SPL REAPAIR TO TOILETS AT GT GROUND AT 4AFSB UNDER GE(AF) GORAKHPUR.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge.

Supply and fixing factory made UPVC white colour three track panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of frame 110x 45mm & sash 40 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/double glazing bead of approproate dimension comprising of UPVC multi chambered frame. with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galanized mild steelsectin made form roll forming process of required length ( shape & size according to UPVC profile) , appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy ( white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearin capacity to be 40 kg) G.I fasteners 100x 8 mm size for fixing frame to finished wall and necessry stainless steel screws etc. Profile frame & sash sall be mitred cut and fusion weled at al corners, including drilling of holes for fixong hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality. complete all as specified and directed by Engineer- in Charge . Note -1. Glazed shutters float glass thickness not less than 5.00 mm and wiremes shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for preparation painting new steel surfaces of any description over 10cm width or girth not other wise described with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed .

M&L for preparation of old decorated surface of ceiling and applying one coats of whites wash complete all as specified.

M&l for complete removal of existing treatment and applying two coats of oil bound distemper including roller mat finishing on wall surfaces complete all as specified and directed.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete and applying two or more coats acrylic smooth exterior paint of required shade on old existing cement base paint surface @ 1.67 ltr/10 sqm complete all as specified.

Dismantling of floor,wall tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified.

Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick (Square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed by the Engr-in-Charge.

M&L for glazed ceremic coloured tiled in vertical surfaces 450x300x8/600x300x9 mm thick(as approved by Engr-in-Charge) set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed.